Date: Wed, 05 Dec 2001 01:00:14 -0800 From: Julian Elischer <julian@elischer.org> To: MurrayTaylor <MurrayTaylor@bytecraftsystems.com> Cc: freebsd-questions@FreeBSD.ORG, Archie Cobbs <archie@dellroad.org> Subject: Re: netgraph frame relay Message-ID: <3C0DE21E.51E4A3D3@elischer.org> References: <007f01c17d54$19f201e0$2a7627cb@lt99101401>
next in thread | previous in thread | raw e-mail | index | archive | help
MurrayTaylor wrote:
>
> I am getting these errors when trying to get a third framerelay link
> setup here
>
> sr0: transmit failed, ST0 00, ST1 50, ST3 07, DSR 03.
looks like no clocking from the exchange...?
i.e. can they get loopback from the exchange?
the error is from the sr driver..
it's well below the level of netgraph.
>
> Please explain what these error codes mean, and what may be
> causing them... me or the telco
>
> I am using (again) the Imagestream WanIC 405 card as I have been using
> on the previous two installs.
>
> this is the start_if.ng0 file
>
> # $Id: start_if.ng0,v 1.1 2001/05/07 01:30:47 root Exp $
> ##############################################
> # RCS controlled file #
> # #
> # Must check out this file to modify it #
> # co -l start_if.ng0 #
> # #
> # Must check in this file when edits done #
> # ci -u start_if.ng0 #
> # #
> ##############################################
>
> # script to set up a frame relay link on the sr card.
> # The dlci used is selected below. The default is 16
> # we use 17 here
>
> CARD=sync_sr0
> DLCI=17
>
> # create a frame_relay type node and attach it to the sync port.
>
> ngctl mkpeer ${CARD}: frame_relay rawdata downstream
>
> # Attach the dlci output of the (de)multiplexor to a new
> # Link management protocol node.
>
> ngctl mkpeer ${CARD}:rawdata lmi dlci0 annexD
>
> # Attach the DLCI(channel) the Telco has assigned you to
> # a node to hadle whatever protocol encapsulation your peer
> # is using. In this case rfc1490 encapsulation.
>
> ngctl mkpeer ${CARD}:rawdata rfc1490 dlci${DLCI} downstream
>
> # Attach the ip (inet) protocol output of the protocol mux to the ip (inet)
> # input of a netgraph "interface" node (ifconfig should show it as "ng0").
> #if interface ng0 needs to be created use a mkpeer command.. e.g.
>
> ngctl mkpeer ${CARD}:rawdata.dlci${DLCI} iface inet inet
>
> cheers
>
> Murray Taylor
> Bytecraft Systems Pty Ltd
> email: murraytaylor@bytecraftsystems.com
> web(s): www.bytecraftsystems.com
> www.bytecraftentertainment.com
--
+------------------------------------+ ______ _ __
| __--_|\ Julian Elischer | \ U \/ / hard at work in
| / \ julian@elischer.org +------>x USA \ a very strange
| ( OZ ) \___ ___ | country !
+- X_.---._/ presently in San Francisco \_/ \\
v
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C0DE21E.51E4A3D3>