Date: Thu, 31 Oct 2002 17:21:44 +0100 (CET) From: Dirk-Willem van Gulik <dirkx@webweaving.org> To: freebsd-questions@FreeBSD.ORG Subject: WL200, new card support, PD6729 Message-ID: <20021031170941.A20493-100000@foem.leiden.webweaving.org>
next in thread | raw e-mail | index | archive | help
Up to a certain point (4.1 or so) it was possible to get a WL200 (which is a WL100 wireless pcmcia with a PD6729 pcmcia<->pci bridge afaik) to work on FreeBSD. In 4.7 and -CURRENT it consistently will either hang at boot, hang after detection or not function, whilst emmitting wi0 watchdog timeout and init attempts. I noticed that there is now a new hw.pcic.pd6729_intr_path I assume this is identical to hw.pcic.intr_path but specific to this bridge ? Secondly - does anyone have a config which works for 4.7 or -CURRENT with the WL200 ? Or hints on BIOS settings. We tried combinations of: -> BIOS - plug and play - always set to no PCI AUTO assign to specific IRQ ISA auto matchin manual assign on PCI slot -> pccard.conf was updated to match above. -> loader.conf: hw.pcic: -> ignore_function_1 yes/no init_path any 0 caused an early hang pd6729_int_path 0,2 hang, 1 boot through -> irq polling or manual to mach bios. Old functional config on 4.1: hw.pcic.intr_path=1 hw.pcic.irq=0 hw.pcic.ignore_function_1=1 Any suggestions of what to try ? Or what dmesg/info to provide to dig deeper into this ? Dw To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021031170941.A20493-100000>