Date: Sat, 25 Feb 2023 10:39:58 +0100 From: Mathias Picker <Mathias.Picker@virtual-earth.de> To: freebsd-x11@freebsd.org Subject: i915 5.10.163 loosing external HDMI screen after a time, problem getting worse Message-ID: <86cz5yf4zc.fsf@virtual-earth.de>
next in thread | raw e-mail | index | archive | help
Hi all,
this is happening on a Thinkpad X1 Yoga 3rd Gen.
The external screen is first recognized as usual HDMI-1, but after=20
a while, faster if the screen goes into powersave, the external=20
screen vanishes from xrandr output, but mostly stays sort of=20
operational.
I mainly use keyboard-driven UI, and it's mostly noticeable using=20
mouse-driven menus, which pop up on the internal screen, quite=20
annoying.
Since I have to use a lot of mouse-driven apps currently it starts=20
to really slow down my work.
xrandr of a freshly started system:
mathiasp:~% xrandr
Screen 0: minimum 8 x 8, current 8128 x 3132, maximum 32767 x=20
32767
eDP-1 connected primary 2560x1440+0+0 (normal left inverted right=20
x axis y axis) 310mm x 170mm
2560x1440 60.01*+ 59.95=20=20
1920x1440 60.00=20=20
1856x1392 60.01=20=20
1792x1344 60.01=20=20
2048x1152 60.00 59.90 59.91=20=20
1920x1200 59.88 59.95=20=20
1920x1080 59.96 60.00 59.93=20=20
1600x1200 60.00=20=20
1680x1050 59.95 59.88=20=20
1400x1050 59.98=20=20
1600x900 60.00 59.95 59.82=20=20
1280x1024 60.02=20=20
1400x900 59.96 59.88=20=20
1280x960 60.00=20=20
1368x768 60.00 59.88 59.85=20=20
1280x800 59.81 59.91=20=20
1280x720 59.86 60.00 59.74=20=20
1024x768 60.00=20=20
1024x576 60.00 59.90 59.82=20=20
960x540 60.00 59.63 59.82=20=20
800x600 60.32 56.25=20=20
864x486 60.00 59.92 59.57=20=20
640x480 59.94=20=20
720x405 59.51 60.00 58.99=20=20
640x360 59.84 59.32 60.00=20=20
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected 5568x3132+2560+0 (normal left inverted right x=20
axis y axis) 600mm x 340mm
3840x2160 30.00*+ 25.00 24.00 29.97 23.98=20=20
2560x1440 59.95=20=20
1920x1080 60.00 59.94 30.00 29.97=20=20
1600x900 60.00=20=20
1280x1024 60.02=20=20
1280x800 59.91=20=20
1280x720 60.00 59.94=20=20
1024x768 60.00=20=20
800x600 60.32=20=20
720x480 60.00 59.94=20=20
640x480 60.00 59.94=20=20
HDMI-2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
xrandr output after the screen "vanished":
mathiasp:~% xrandr
Screen 0: minimum 8 x 8, current 8128 x 3132, maximum 32767 x=20
32767
eDP-1 connected primary 2560x1440+0+0 (normal left inverted right=20
x axis y axis) 310mm x 170mm
2560x1440 60.01*+ 59.95=20=20
1920x1440 60.00=20=20
1856x1392 60.01=20=20
1792x1344 60.01=20=20
2048x1152 60.00 59.90 59.91=20=20
1920x1200 59.88 59.95=20=20
1920x1080 59.96 60.00 59.93=20=20
1600x1200 60.00=20=20
1680x1050 59.95 59.88=20=20
1400x1050 59.98=20=20
1600x900 60.00 59.95 59.82=20=20
1280x1024 60.02=20=20
1400x900 59.96 59.88=20=20
1280x960 60.00=20=20
1368x768 60.00 59.88 59.85=20=20
1280x800 59.81 59.91=20=20
1280x720 59.86 60.00 59.74=20=20
1024x768 60.00=20=20
1024x576 60.00 59.90 59.82=20=20
960x540 60.00 59.63 59.82=20=20
800x600 60.32 56.25=20=20
864x486 60.00 59.92 59.57=20=20
640x480 59.94=20=20
720x405 59.51 60.00 58.99=20=20
640x360 59.84 59.32 60.00=20=20
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected 5568x3132+2560+0 (normal left inverted right x=20
axis y axis) 0mm x 0mm
HDMI-2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
3840x2160 (0x7c8) 297.000MHz +HSync +VSync
h: width 3840 start 4016 end 4104 total 4400 skew 0=20
clock 67.50KHz
v: height 2160 start 2168 end 2178 total 2250=20
clock 30.00Hz
As seen, the virtual screen is also shown as disconnected but=20
works and sort of represents the external monitor and I can use=20
it, just every menu pops up on the internal screen.
* When did this start?
Since this mainly shows in popups, which I really use rarely, I=20
cannot say exactly, but it startet probably around March 2022.=20
Yeah, I'm late, but it took me a while to even figure out what was=20
going on, and then I got used to it, now I=E2=80=99m forced to use more=20
GUI programs and it is really annoying.
FreeBSD version
FreeBSD danton 13.2-PRERELEASE FreeBSD 13.2-PRERELEASE #0=20
stable/13-n254200-8497b431f19e: Mon Jan 30 12:56:25 CET 2023=20
mathiasp@danton:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
PCI Info
pciconf -lv
DRM KMOD version
drm-510-kmod 5.10.163
To Reproduce
Start X11 and work with it :)
Can take anywhere from 10 minutes to maybe two hours.
Additional context:=20
I'm now on the third HDMI cable.
There is nothing in xorg.conf.d mentioning screen configuration.
I played around with power saving settings, but it didn=E2=80=99t change=20
anything. My current settings in loader.conf:
# Disable frame buffer compression for power savings, does not=20
work
hw.i915kms.enable_fbc=3D0
hw.i915kms.disable_power_well=3D"-1"
# Just try if guc firmware helps (doesn=E2=80=99t)
hw.i915kms.enable_guc=3D0
Neither messages nor Xorg.0.log show anything when this happens:
/var/log/Xorg.0.log
[ 38.511] (--) Log file renamed from=20
"/var/log/Xorg.pid-28321.log" to "/var/log/Xorg.0.log"
[ 38.512]=20
X.Org X Server 1.21.1.4
X Protocol Version 11, Revision 0
[ 38.512] Current Operating System: FreeBSD danton=20
13.2-PRERELEASE FreeBSD 13.2-PRERELEASE #0=20
stable/13-n254200-8497b431f19e: Mon Jan 30 12:56:25 CET 2023=20
mathiasp@danton:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
[ 38.512]=20=20
[ 38.512] Current version of pixman: 0.42.2
[ 38.512] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 38.512] Markers: (--) probed, (**) from config file, (=3D=3D)=20
default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??)=20
unknown.
[ 38.512] (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Thu Feb=20
23 12:21:31 2023
[ 38.514] (=3D=3D) Using config directory:=20
"/usr/local/etc/X11/xorg.conf.d"
[ 38.514] (=3D=3D) Using system config directory=20
"/usr/local/share/X11/xorg.conf.d"
[ 38.515] (=3D=3D) No Layout section. Using the first Screen=20
section.
[ 38.515] (=3D=3D) No screen section available. Using defaults.
[ 38.515] (**) |-->Screen "Default Screen Section" (0)
[ 38.515] (**) | |-->Monitor "<default monitor>"
[ 38.515] (=3D=3D) No device specified for screen "Default Screen=20
Section".
Using the first device section listed.
[ 38.515] (**) | |-->Device "Intel Graphics"
[ 38.515] (=3D=3D) No monitor specified for screen "Default Screen=20
Section".
Using a default monitor configuration.
[ 38.515] (**) Option "AutoAddDevices" "true"
[ 38.515] (**) Option "AutoEnableDevices" "true"
[ 38.515] (**) Automatically adding devices
[ 38.515] (**) Automatically enabling devices
[ 38.515] (=3D=3D) Not automatically adding GPU devices
[ 38.515] (=3D=3D) Automatically binding GPU devices
[ 38.515] (=3D=3D) Max clients allowed: 256, resource mask:=20
0x1fffff
[ 38.517] (=3D=3D) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
catalogue:/usr/local/etc/X11/fontpath.d
[ 38.517] (=3D=3D) ModulePath set to "/usr/local/lib/xorg/modules"
[ 38.517] (II) The server relies on udev to provide the list of=20
input devices.
If no devices become available, reconfigure udev or=20
disable AutoAddDevices.
[ 38.517] (II) Module ABI versions:
[ 38.517] X.Org ANSI C Emulation: 0.4
[ 38.517] X.Org Video Driver: 25.2
[ 38.517] X.Org XInput driver : 24.4
[ 38.517] X.Org Server Extension : 10.0
[ 38.517] (--) PCI:*(0@0:2:0) 8086:5917:17aa:2259 rev 7, Mem @=20
0x2ffe000000/16777216, 0xc0000000/536870912, I/O @ 0x0000e000/64,=20
BIOS @ 0x????????/65536
[ 38.517] (II) LoadModule: "glx"
[ 38.518] (II) Loading=20
/usr/local/lib/xorg/modules/extensions/libglx.so
[ 38.523] (II) Module glx: vendor=3D"X.Org Foundation"
[ 38.523] compiled for 1.21.1.4, module version =3D 1.0.0
[ 38.523] ABI class: X.Org Server Extension, version 10.0
[ 38.523] (II) LoadModule: "intel"
[ 38.523] (II) Loading=20
/usr/local/lib/xorg/modules/drivers/intel_drv.so
[ 38.526] (II) Module intel: vendor=3D"X.Org Foundation"
[ 38.526] compiled for 1.21.1.4, module version =3D 2.99.917
[ 38.526] Module class: X.Org Video Driver
[ 38.526] ABI class: X.Org Video Driver, version 25.2
[ 38.526] (II) intel: Driver for Intel(R) Integrated Graphics=20
Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854,=20
852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview=20
GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE,=20
G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 38.526] (II) intel: Driver for Intel(R) HD Graphics
[ 38.526] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 38.526] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 38.526] (--) Using syscons driver with X support (version=20
2.0)
[ 38.526] (++) using VT number 9
[ 38.544] (II) intel(0): Using Kernel Mode Setting driver:=20
i915, version 1.6.0 20200917
[ 38.544] (II) intel(0): SNA compiled:=20
2.99.917-916-g31486f40f8e8
[ 38.545] (WW) VGA arbiter: cannot open kernel arbiter, no=20
multi-card support
[ 38.547] (--) intel(0): gen9 engineering sample
[ 38.548] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3,=20
sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 38.548] (II) intel(0): Creating default Display subsection in=20
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 38.548] (=3D=3D) intel(0): Depth 24, (--) framebuffer bpp 32
[ 38.548] (=3D=3D) intel(0): RGB weight 888
[ 38.548] (=3D=3D) intel(0): Default visual is TrueColor
[ 38.548] (**) intel(0): Option "AccelMethod" "sna"
[ 38.548] (**) intel(0): Option "DRI" "3"
[ 38.548] (**) intel(0): Option "TearFree" "true"
[ 38.550] (II) intel(0): Output eDP-1 has no monitor section
[ 38.550] (II) intel(0): Enabled output eDP-1
[ 38.550] (II) intel(0): Output DP-1 has no monitor section
[ 38.550] (II) intel(0): Enabled output DP-1
[ 38.550] (II) intel(0): Output HDMI-1 has no monitor section
[ 38.550] (II) intel(0): Enabled output HDMI-1
[ 38.550] (II) intel(0): Output DP-2 has no monitor section
[ 38.550] (II) intel(0): Enabled output DP-2
[ 38.550] (II) intel(0): Output HDMI-2 has no monitor section
[ 38.550] (II) intel(0): Enabled output HDMI-2
[ 38.550] (--) intel(0): Using a maximum size of 256x256 for=20
hardware cursors
[ 38.551] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 38.551] (II) intel(0): Enabled output VIRTUAL1
[ 38.551] (--) intel(0): Output eDP-1 using initial mode=20
2560x1440 on pipe 0
[ 38.551] (--) intel(0): Output HDMI-1 using initial mode=20
2560x1440 on pipe 1
[ 38.551] (**) intel(0): TearFree enabled
[ 38.551] (=3D=3D) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 38.551] (=3D=3D) intel(0): DPI set to (96, 96)
[ 38.551] (II) Loading sub module "dri3"
[ 38.551] (II) LoadModule: "dri3"
[ 38.551] (II) Module "dri3" already built-in
[ 38.551] (II) Loading sub module "dri2"
[ 38.551] (II) LoadModule: "dri2"
[ 38.551] (II) Module "dri2" already built-in
[ 38.551] (II) Loading sub module "present"
[ 38.551] (II) LoadModule: "present"
[ 38.551] (II) Module "present" already built-in
[ 38.555] (II) intel(0): SNA initialized with Kabylake (gen9)=20
backend
[ 38.555] (=3D=3D) intel(0): Backing store enabled
[ 38.555] (=3D=3D) intel(0): Silken mouse enabled
[ 38.555] (II) intel(0): HW Cursor enabled
[ 38.556] (=3D=3D) intel(0): DPMS enabled
[ 38.556] (=3D=3D) intel(0): Display hotplug detection enabled
[ 38.556] (II) intel(0): [DRI2] Setup complete
[ 38.556] (II) intel(0): [DRI2] DRI driver: iris
[ 38.556] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 38.557] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 38.557] (II) intel(0): hardware support for Present enabled
[ 38.557] (II) Initializing extension Generic Event Extension
[ 38.557] (II) Initializing extension SHAPE
[ 38.557] (II) Initializing extension MIT-SHM
[ 38.558] (II) Initializing extension XInputExtension
[ 38.558] (II) Initializing extension XTEST
[ 38.558] (II) Initializing extension BIG-REQUESTS
[ 38.558] (II) Initializing extension SYNC
[ 38.558] (II) Initializing extension XKEYBOARD
[ 38.559] (II) Initializing extension XC-MISC
[ 38.559] (II) Initializing extension SECURITY
[ 38.559] (II) Initializing extension XFIXES
[ 38.560] (II) Initializing extension RENDER
[ 38.560] (II) Initializing extension RANDR
[ 38.560] (II) Initializing extension COMPOSITE
[ 38.560] (II) Initializing extension DAMAGE
[ 38.560] (II) Initializing extension MIT-SCREEN-SAVER
[ 38.561] (II) Initializing extension DOUBLE-BUFFER
[ 38.561] (II) Initializing extension RECORD
[ 38.561] (II) Initializing extension DPMS
[ 38.561] (II) Initializing extension Present
[ 38.561] (II) Initializing extension DRI3
[ 38.561] (II) Initializing extension X-Resource
[ 38.561] (II) Initializing extension XVideo
[ 38.562] (II) Initializing extension XVideo-MotionCompensation
[ 38.562] (II) Initializing extension GLX
[ 38.766] (II) AIGLX: Loaded and initialized iris
[ 38.766] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 38.766] (II) Initializing extension XFree86-VidModeExtension
[ 38.766] (II) Initializing extension XFree86-DGA
[ 38.766] (II) Initializing extension XFree86-DRI
[ 38.766] (II) Initializing extension DRI2
[ 38.770] (II) intel(0): switch to mode 2560x1440@60.0 on eDP-1=20
using pipe 0, position (0, 0), rotation normal, reflection none
[ 38.770] (II) intel(0): switch to mode 2560x1440@60.0 on=20
HDMI-1 using pipe 1, position (0, 0), rotation normal, reflection=20
none
[ 38.774] (II) intel(0): Setting screen physical size to 677 x=20
381
[ 38.831] (II) config/udev: Adding input device System mouse=20
(/dev/input/event0)
[ 38.831] (**) System mouse: Applying InputClass "evdev pointer=20
catchall"
[ 38.831] (**) System mouse: Applying InputClass "libinput=20
pointer catchall"
[ 38.831] (II) LoadModule: "libinput"
[ 38.831] (II) Loading=20
/usr/local/lib/xorg/modules/input/libinput_drv.so
[ 38.836] (II) Module libinput: vendor=3D"X.Org Foundation"
[ 38.836] compiled for 1.21.1.4, module version =3D 1.2.0
[ 38.836] Module class: X.Org XInput Driver
[ 38.836] ABI class: X.Org XInput driver, version 24.4
[ 38.836] (II) Using input driver 'libinput' for 'System mouse'
[ 38.836] (**) System mouse: always reports core events
[ 38.836] (**) Option "Device" "/dev/input/event0"
[ 38.836] (**) Option "_source" "server/udev"
[ 38.842] (II) event0 - System mouse: is tagged by udev as:=20
Mouse
[ 38.843] (II) event0 - System mouse: device is a pointer
[ 38.844] (II) event0 - System mouse: device removed
[ 38.844] (**) Option "config_info" "udev:/dev/input/event0"
[ 38.844] (II) XINPUT: Adding extended input device "System=20
mouse" (type: MOUSE, id 6)
[ 38.844] (**) Option "AccelerationScheme" "none"
[ 38.844] (**) System mouse: (accel) selected scheme none/0
[ 38.844] (**) System mouse: (accel) acceleration factor: 2.000
[ 38.844] (**) System mouse: (accel) acceleration threshold: 4
[ 38.845] (II) event0 - System mouse: is tagged by udev as:=20
Mouse
[ 38.846] (II) event0 - System mouse: device is a pointer
[ 38.846] (II) config/udev: Adding input device System keyboard=20
multiplexer (/dev/input/event1)
[ 38.846] (**) System keyboard multiplexer: Applying InputClass=20
"evdev keyboard catchall"
[ 38.846] (**) System keyboard multiplexer: Applying InputClass=20
"Evdev keyboard"
[ 38.846] (**) System keyboard multiplexer: Applying InputClass=20
"libinput keyboard catchall"
[ 38.846] (**) System keyboard multiplexer: Applying InputClass=20
"keyboard"
[ 38.846] (II) Using input driver 'libinput' for 'System=20
keyboard multiplexer'
[ 38.846] (**) System keyboard multiplexer: always reports core=20
events
[ 38.846] (**) Option "Device" "/dev/input/event1"
[ 38.846] (**) Option "_source" "server/udev"
[ 38.847] (II) event1 - System keyboard multiplexer: is tagged=20
by udev as: Keyboard
[ 38.848] (II) event1 - System keyboard multiplexer: device is=20
a keyboard
[ 38.849] (II) event1 - System keyboard multiplexer: device=20
removed
[ 38.849] (**) Option "config_info" "udev:/dev/input/event1"
[ 38.849] (II) XINPUT: Adding extended input device "System=20
keyboard multiplexer" (type: KEYBOARD, id 7)
[ 38.849] (**) Option "xkb_rules" "evdev"
[ 38.849] (**) Option "xkb_layout" "de,us,fr"
[ 38.849] (WW) Option "xkb_variant" requires a string value
[ 38.875] (II) event1 - System keyboard multiplexer: is tagged=20
by udev as: Keyboard
[ 38.875] (II) event1 - System keyboard multiplexer: device is=20
a keyboard
[ 38.942] (II) config/udev: Adding input device Wacom Intuos PT=20
S 2 Pen (/dev/input/event11)
[ 38.942] (**) Wacom Intuos PT S 2 Pen: Applying InputClass=20
"evdev tablet catchall"
[ 38.942] (**) Wacom Intuos PT S 2 Pen: Applying InputClass=20
"libinput tablet catchall"
[ 38.943] (**) Wacom Intuos PT S 2 Pen: Applying InputClass=20
"Wacom USB tablet class"
[ 38.943] (**) Wacom Intuos PT S 2 Pen: Applying InputClass=20
"Wacom tablet class"
[ 38.943] (II) LoadModule: "wacom"
[ 38.943] (II) Loading=20
/usr/local/lib/xorg/modules/input/wacom_drv.so
[ 38.948] (II) Module wacom: vendor=3D"X.Org Foundation"
[ 38.948] compiled for 1.21.1.4, module version =3D 0.39.0
[ 38.948] Module class: X.Org XInput Driver
[ 38.948] ABI class: X.Org XInput driver, version 24.4
[ 38.948] (II) Build version: 0.39.0
[ 38.948] (II) wacom: Driver for Wacom graphics tablets:=20
PenPartner, Graphire,
Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3=20
6x8,
Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun=20
6x8,
Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461,=20
CTL-660,
CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1,=20
CTH-461/L,
CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos=20
12x12,
Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550,=20
PL800,
PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521,=20
DTU1931,
DTU2231, DTU1631, DTH1152, DTH1152, DTK2451, DTH2452,=20
DTH2452,
Intuos2 4x5, Intuos2 6x8, Intuos2 9x12, Intuos2 12x12,=20
Intuos2 12x18,
Intuos2 6x8 , Volito, PenStation, Volito2 4x5, Volito2=20
2x3,
PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6, Bamboo1 5x8,=20
Intuos3 4x5,
Intuos3 6x8, Intuos3 9x12, Intuos3 12x12, Intuos3 12x19,
Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,=20
Intuos4 8x13,
Intuos4 12x19, Intuos4 WL USB Endpoint,
Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5=20
touch M,
Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S,=20
Intuos Pro M,
Intuos Pro L, Intuos Draw small, Intuos Art/Photo/Comic=20
small,
Intuos Draw medium, Intuos Art medium, Cintiq 21UX, Cintiq=20
20WSX,
Cintiq 12WX, Cintiq 21UX2, Cintiq 24HD, Cintiq 22HD,
Cintiq 24HD touch (EMR digitizer), Cintiq 13HD, DTK2241,=20
DTH2242,
Cintiq 22HDT, Cintiq 27QHDT, Cintiq 27QHDT, Mobilestudio=20
Pro 13,
MobileStudio Pro 16, MobileStudio Pro 13, MobileStudio Pro=20
16,
Cintiq 13 FHD Pro, Cintiq 16 UHD Pro, Cintiq Pro 24,=20
Cintiq Pro 32,
Cintiq 13 FHD Pro, Cintiq 16 UHD Pro, Cintiq Pro 24,=20
Cintiq Pro 32,
Cintiq Pro 24, Mobilestudio Pro 13, MobileStudio Pro 16,
MobileStudio Pro 13, MobileStudio Pro 16, MobileStudio Pro=20
16,
MobileStudio Pro 16, TabletPC 0x90, TabletPC 0x93,=20
TabletPC 0x97,
TabletPC 0x9A, CapPlus 0x9F, TabletPC 0xE2, TabletPC=20
0xE3,
TabletPC 0xE5, TabletPC 0xE6, TabletPC 0xEC, TabletPC=20
0xED,
TabletPC 0xEF, TabletPC 0x100, TabletPC 0x101, TabletPC=20
0x10D,
TabletPC 0x116, TabletPC 0x12C, TabletPC 0x4001, TabletPC=20
0x4004,
TabletPC 0x5000, TabletPC 0x5002, usb:172f:0024,=20
usb:172f:0025,
usb:172f:0026, usb:172f:0027, usb:172f:0028,=20
usb:172f:0030,
usb:172f:0031, usb:172f:0032, usb:172f:0033,=20
usb:172f:0034,
usb:172f:0035, usb:172f:0036, usb:172f:0037,=20
usb:172f:0038,
usb:172f:0039, usb:172f:0051, usb:172f:0052,=20
usb:172f:0053,
usb:172f:0054, usb:172f:0055, usb:172f:0056,=20
usb:172f:0057,
usb:172f:0058, usb:172f:0500, usb:172f:0501,=20
usb:172f:0502,
usb:172f:0503, usb:1b96:0001, usb:17ef:6004
[ 38.952] (II) Using input driver 'wacom' for 'Wacom Intuos PT=20
S 2 Pen'
[ 38.952] (**) Wacom Intuos PT S 2 Pen: always reports core=20
events
[ 38.952] (**) Option "Device" "/dev/input/event11"
[ 39.007] (II) Wacom Intuos PT S 2 Pen: type not specified,=20
assuming 'stylus'.
[ 39.007] (II) Wacom Intuos PT S 2 Pen: other types will be=20
automatically added.
[ 39.008] (--) Wacom Intuos PT S 2 Pen stylus: using pressure=20
threshold of 851 for button 1
[ 39.008] (**) Wacom Intuos PT S 2 Pen stylus: panscroll is 0
[ 39.008] (**) Wacom Intuos PT S 2 Pen stylus: panscroll=20
modified to 1300
[ 39.008] (--) Wacom Intuos PT S 2 Pen stylus: maxX=3D15200=20
maxY=3D9500 maxZ=3D2047 resX=3D100000 resY=3D100000 tilt=3Denabled
[ 39.008] (II) Wacom Intuos PT S 2 Pen stylus: hotplugging=20
dependent devices.
[ 39.009] (EE) Wacom Intuos PT S 2 Pen stylus: Invalid type=20
'eraser' for this device.
[ 39.009] (EE) Wacom Intuos PT S 2 Pen stylus: Invalid type=20
'cursor' for this device.
[ 39.009] (EE) Wacom Intuos PT S 2 Pen stylus: Invalid type=20
'touch' for this device.
[ 39.009] (EE) Wacom Intuos PT S 2 Pen stylus: Invalid type=20
'pad' for this device.
[ 39.009] (II) Wacom Intuos PT S 2 Pen stylus: hotplugging=20
completed.
[ 39.020] (**) Option "config_info" "udev:/dev/input/event11"
[ 39.020] (II) XINPUT: Adding extended input device "Wacom=20
Intuos PT S 2 Pen stylus" (type: STYLUS, id 8)
[ 39.021] (**) Wacom Intuos PT S 2 Pen stylus: (accel) keeping=20
acceleration scheme 1
[ 39.021] (**) Wacom Intuos PT S 2 Pen stylus: (accel)=20
acceleration profile 0
[ 39.021] (**) Wacom Intuos PT S 2 Pen stylus: (accel)=20
acceleration factor: 2.000
[ 39.021] (**) Wacom Intuos PT S 2 Pen stylus: (accel)=20
acceleration threshold: 4
[ 39.142] (II) config/udev: Adding input device Wacom Intuos PT=20
S 2 Finger (/dev/input/event12)
[ 39.142] (**) Wacom Intuos PT S 2 Finger: Applying InputClass=20
"evdev pointer catchall"
[ 39.142] (**) Wacom Intuos PT S 2 Finger: Applying InputClass=20
"evdev touchpad catchall"
[ 39.143] (**) Wacom Intuos PT S 2 Finger: Applying InputClass=20
"libinput pointer catchall"
[ 39.143] (**) Wacom Intuos PT S 2 Finger: Applying InputClass=20
"libinput touchpad catchall"
[ 39.143] (**) Wacom Intuos PT S 2 Finger: Applying InputClass=20
"touchpad catchall"
[ 39.143] (**) Wacom Intuos PT S 2 Finger: Applying InputClass=20
"Default clickpad buttons"
[ 39.143] (**) Wacom Intuos PT S 2 Finger: Applying InputClass=20
"Wacom USB touchpad class"
[ 39.143] (**) Wacom Intuos PT S 2 Finger: Applying InputClass=20
"Wacom touchpad class"
[ 39.143] (II) Using input driver 'wacom' for 'Wacom Intuos PT=20
S 2 Finger'
[ 39.143] (**) Wacom Intuos PT S 2 Finger: always reports core=20
events
[ 39.143] (**) Option "Device" "/dev/input/event12"
[ 39.198] (EE) Wacom Intuos PT S 2 Finger: Invalid type=20
'stylus' for this device.
[ 39.198] (EE) Wacom Intuos PT S 2 Finger: Invalid type=20
'eraser' for this device.
[ 39.198] (EE) Wacom Intuos PT S 2 Finger: Invalid type=20
'cursor' for this device.
[ 39.198] (II) Wacom Intuos PT S 2 Finger: type not specified,=20
assuming 'touch'.
[ 39.198] (II) Wacom Intuos PT S 2 Finger: other types will be=20
automatically added.
[ 39.200] (**) Wacom Intuos PT S 2 Finger touch: panscroll is 0
[ 39.200] (**) Wacom Intuos PT S 2 Finger touch: panscroll=20
modified to 2600
[ 39.200] (--) Wacom Intuos PT S 2 Finger touch: maxX=3D1520=20
maxY=3D950 maxZ=3D0 resX=3D10000 resY=3D10000=20
[ 39.200] (II) Wacom Intuos PT S 2 Finger touch: hotplugging=20
dependent devices.
[ 39.200] (EE) Wacom Intuos PT S 2 Finger touch: Invalid type=20
'stylus' for this device.
[ 39.200] (EE) Wacom Intuos PT S 2 Finger touch: Invalid type=20
'eraser' for this device.
[ 39.200] (EE) Wacom Intuos PT S 2 Finger touch: Invalid type=20
'cursor' for this device.
[ 39.200] (EE) Wacom Intuos PT S 2 Finger touch: Invalid type=20
'pad' for this device.
[ 39.200] (II) Wacom Intuos PT S 2 Finger touch: hotplugging=20
completed.
[ 39.211] (**) Option "config_info" "udev:/dev/input/event12"
[ 39.211] (II) XINPUT: Adding extended input device "Wacom=20
Intuos PT S 2 Finger touch" (type: TOUCH, id 9)
[ 39.212] (**) Wacom Intuos PT S 2 Finger touch: (accel)=20
keeping acceleration scheme 1
[ 39.212] (**) Wacom Intuos PT S 2 Finger touch: (accel)=20
acceleration profile 0
[ 39.212] (**) Wacom Intuos PT S 2 Finger touch: (accel)=20
acceleration factor: 2.000
[ 39.212] (**) Wacom Intuos PT S 2 Finger touch: (accel)=20
acceleration threshold: 4
[ 39.269] (II) config/udev: Adding input device Wacom Intuos PT=20
S 2 Pad (/dev/input/event13)
[ 39.269] (**) Wacom Intuos PT S 2 Pad: Applying InputClass=20
"evdev tablet catchall"
[ 39.269] (**) Wacom Intuos PT S 2 Pad: Applying InputClass=20
"libinput tablet catchall"
[ 39.269] (**) Wacom Intuos PT S 2 Pad: Applying InputClass=20
"Wacom USB tablet class"
[ 39.269] (**) Wacom Intuos PT S 2 Pad: Applying InputClass=20
"Wacom tablet class"
[ 39.269] (II) Using input driver 'wacom' for 'Wacom Intuos PT=20
S 2 Pad'
[ 39.269] (**) Wacom Intuos PT S 2 Pad: always reports core=20
events
[ 39.269] (**) Option "Device" "/dev/input/event13"
[ 39.270] (EE) Wacom Intuos PT S 2 Pad: Invalid type 'stylus'=20
for this device.
[ 39.270] (EE) Wacom Intuos PT S 2 Pad: Invalid type 'eraser'=20
for this device.
[ 39.270] (EE) Wacom Intuos PT S 2 Pad: Invalid type 'cursor'=20
for this device.
[ 39.270] (EE) Wacom Intuos PT S 2 Pad: Invalid type 'touch'=20
for this device.
[ 39.270] (II) Wacom Intuos PT S 2 Pad: type not specified,=20
assuming 'pad'.
[ 39.270] (II) Wacom Intuos PT S 2 Pad: other types will be=20
automatically added.
[ 39.271] (**) Wacom Intuos PT S 2 Pad pad: panscroll is 0
[ 39.271] (**) Wacom Intuos PT S 2 Pad pad: panscroll modified=20
to 2600
[ 39.271] (II) Wacom Intuos PT S 2 Pad pad: hotplugging=20
dependent devices.
[ 39.271] (EE) Wacom Intuos PT S 2 Pad pad: Invalid type=20
'stylus' for this device.
[ 39.271] (EE) Wacom Intuos PT S 2 Pad pad: Invalid type=20
'eraser' for this device.
[ 39.271] (EE) Wacom Intuos PT S 2 Pad pad: Invalid type=20
'cursor' for this device.
[ 39.271] (EE) Wacom Intuos PT S 2 Pad pad: Invalid type=20
'touch' for this device.
[ 39.271] (II) Wacom Intuos PT S 2 Pad pad: hotplugging=20
completed.
[ 39.271] (**) Option "config_info" "udev:/dev/input/event13"
[ 39.272] (II) XINPUT: Adding extended input device "Wacom=20
Intuos PT S 2 Pad pad" (type: PAD, id 10)
[ 39.272] (**) Wacom Intuos PT S 2 Pad pad: (accel) keeping=20
acceleration scheme 1
[ 39.273] (**) Wacom Intuos PT S 2 Pad pad: (accel)=20
acceleration profile 0
[ 39.273] (**) Wacom Intuos PT S 2 Pad pad: (accel)=20
acceleration factor: 2.000
[ 39.273] (**) Wacom Intuos PT S 2 Pad pad: (accel)=20
acceleration threshold: 4
[ 39.273] (II) config/udev: Adding input device La-VIEW=20
Technology SteelSeries (/dev/input/event14)
[ 39.273] (**) La-VIEW Technology SteelSeries: Applying=20
InputClass "evdev pointer catchall"
[ 39.273] (**) La-VIEW Technology SteelSeries: Applying=20
InputClass "libinput pointer catchall"
[ 39.273] (II) Using input driver 'libinput' for 'La-VIEW=20
Technology SteelSeries'
[ 39.273] (**) La-VIEW Technology SteelSeries: always reports=20
core events
[ 39.273] (**) Option "Device" "/dev/input/event14"
[ 39.273] (**) Option "_source" "server/udev"
[ 39.276] (II) event14 - La-VIEW Technology SteelSeries, class=20
0/0, rev 2.00/0.00, addr 7: is tagged by udev as: Mouse
[ 39.277] (II) event14 - La-VIEW Technology SteelSeries, class=20
0/0, rev 2.00/0.00, addr 7: device is a pointer
[ 39.278] (II) event14 - La-VIEW Technology SteelSeries, class=20
0/0, rev 2.00/0.00, addr 7: device removed
[ 39.278] (**) Option "config_info" "udev:/dev/input/event14"
[ 39.278] (II) XINPUT: Adding extended input device "La-VIEW=20
Technology SteelSeries" (type: MOUSE, id 11)
[ 39.278] (**) Option "AccelerationScheme" "none"
[ 39.278] (**) La-VIEW Technology SteelSeries: (accel) selected=20
scheme none/0
[ 39.278] (**) La-VIEW Technology SteelSeries: (accel)=20
acceleration factor: 2.000
[ 39.278] (**) La-VIEW Technology SteelSeries: (accel)=20
acceleration threshold: 4
[ 39.279] (II) event14 - La-VIEW Technology SteelSeries, class=20
0/0, rev 2.00/0.00, addr 7: is tagged by udev as: Mouse
[ 39.280] (II) event14 - La-VIEW Technology SteelSeries, class=20
0/0, rev 2.00/0.00, addr 7: device is a pointer
[ 39.346] (II) config/udev: Adding input device Wacom Pen and=20
multitouch sensor Finger (/dev/input/event15)
[ 39.346] (**) Wacom Pen and multitouch sensor Finger: Applying=20
InputClass "evdev touchscreen catchall"
[ 39.347] (**) Wacom Pen and multitouch sensor Finger: Applying=20
InputClass "libinput touchscreen catchall"
[ 39.347] (**) Wacom Pen and multitouch sensor Finger: Applying=20
InputClass "Wacom USB touchscreen class"
[ 39.347] (**) Wacom Pen and multitouch sensor Finger: Applying=20
InputClass "Wacom touchscreen class"
[ 39.347] (II) Using input driver 'wacom' for 'Wacom Pen and=20
multitouch sensor Finger'
[ 39.347] (**) Wacom Pen and multitouch sensor Finger: always=20
reports core events
[ 39.347] (**) Option "Device" "/dev/input/event15"
[ 39.402] (EE) Wacom Pen and multitouch sensor Finger: Invalid=20
type 'stylus' for this device.
[ 39.402] (EE) Wacom Pen and multitouch sensor Finger: Invalid=20
type 'eraser' for this device.
[ 39.402] (EE) Wacom Pen and multitouch sensor Finger: Invalid=20
type 'cursor' for this device.
[ 39.402] (II) Wacom Pen and multitouch sensor Finger: type not=20
specified, assuming 'touch'.
[ 39.402] (II) Wacom Pen and multitouch sensor Finger: other=20
types will be automatically added.
[ 39.403] (**) Wacom Pen and multitouch sensor Finger touch:=20
panscroll is 0
[ 39.404] (**) Wacom Pen and multitouch sensor Finger touch:=20
panscroll modified to 13
[ 39.404] (--) Wacom Pen and multitouch sensor Finger touch:=20
maxX=3D12372 maxY=3D6960 maxZ=3D0 resX=3D40000 resY=3D40000=20
[ 39.404] (II) Wacom Pen and multitouch sensor Finger touch:=20
hotplugging dependent devices.
[ 39.404] (EE) Wacom Pen and multitouch sensor Finger touch:=20
Invalid type 'stylus' for this device.
[ 39.404] (EE) Wacom Pen and multitouch sensor Finger touch:=20
Invalid type 'eraser' for this device.
[ 39.404] (EE) Wacom Pen and multitouch sensor Finger touch:=20
Invalid type 'cursor' for this device.
[ 39.404] (EE) Wacom Pen and multitouch sensor Finger touch:=20
Invalid type 'pad' for this device.
[ 39.404] (II) Wacom Pen and multitouch sensor Finger touch:=20
hotplugging completed.
[ 39.415] (**) Option "config_info" "udev:/dev/input/event15"
[ 39.415] (II) XINPUT: Adding extended input device "Wacom Pen=20
and multitouch sensor Finger touch" (type: TOUCH, id 12)
[ 39.416] (**) Wacom Pen and multitouch sensor Finger touch:=20
(accel) keeping acceleration scheme 1
[ 39.416] (**) Wacom Pen and multitouch sensor Finger touch:=20
(accel) acceleration profile 0
[ 39.416] (**) Wacom Pen and multitouch sensor Finger touch:=20
(accel) acceleration factor: 2.000
[ 39.416] (**) Wacom Pen and multitouch sensor Finger touch:=20
(accel) acceleration threshold: 4
[ 39.538] (II) config/udev: Adding input device Wacom Pen and=20
multitouch sensor Pen (/dev/input/event16)
[ 39.538] (**) Wacom Pen and multitouch sensor Pen: Applying=20
InputClass "evdev tablet catchall"
[ 39.539] (**) Wacom Pen and multitouch sensor Pen: Applying=20
InputClass "libinput tablet catchall"
[ 39.539] (**) Wacom Pen and multitouch sensor Pen: Applying=20
InputClass "Wacom USB tablet class"
[ 39.539] (**) Wacom Pen and multitouch sensor Pen: Applying=20
InputClass "Wacom tablet class"
[ 39.539] (II) Using input driver 'wacom' for 'Wacom Pen and=20
multitouch sensor Pen'
[ 39.539] (**) Wacom Pen and multitouch sensor Pen: always=20
reports core events
[ 39.539] (**) Option "Device" "/dev/input/event16"
[ 39.594] (II) Wacom Pen and multitouch sensor Pen: type not=20
specified, assuming 'stylus'.
[ 39.594] (II) Wacom Pen and multitouch sensor Pen: other types=20
will be automatically added.
[ 39.595] (--) Wacom Pen and multitouch sensor Pen stylus:=20
using pressure threshold of 851 for button 1
[ 39.595] (**) Wacom Pen and multitouch sensor Pen stylus:=20
panscroll is 0
[ 39.595] (**) Wacom Pen and multitouch sensor Pen stylus:=20
panscroll modified to 1300
[ 39.595] (--) Wacom Pen and multitouch sensor Pen stylus:=20
maxX=3D30935 maxY=3D17401 maxZ=3D4095 resX=3D100000 resY=3D100000=20
tilt=3Denabled
[ 39.595] (II) Wacom Pen and multitouch sensor Pen stylus:=20
hotplugging dependent devices.
[ 39.595] (EE) Wacom Pen and multitouch sensor Pen stylus:=20
Invalid type 'cursor' for this device.
[ 39.595] (EE) Wacom Pen and multitouch sensor Pen stylus:=20
Invalid type 'touch' for this device.
[ 39.595] (EE) Wacom Pen and multitouch sensor Pen stylus:=20
Invalid type 'pad' for this device.
[ 39.595] (II) Wacom Pen and multitouch sensor Pen stylus:=20
hotplugging completed.
[ 39.606] (**) Option "config_info" "udev:/dev/input/event16"
[ 39.607] (II) XINPUT: Adding extended input device "Wacom Pen=20
and multitouch sensor Pen stylus" (type: STYLUS, id 13)
[ 39.607] (**) Wacom Pen and multitouch sensor Pen stylus:=20
(accel) keeping acceleration scheme 1
[ 39.607] (**) Wacom Pen and multitouch sensor Pen stylus:=20
(accel) acceleration profile 0
[ 39.608] (**) Wacom Pen and multitouch sensor Pen stylus:=20
(accel) acceleration factor: 2.000
[ 39.608] (**) Wacom Pen and multitouch sensor Pen stylus:=20
(accel) acceleration threshold: 4
[ 39.662] (II) config/udev: Adding input device ACPI video=20
extension (/dev/input/event2)
[ 39.662] (**) ACPI video extension: Applying InputClass "evdev=20
keyboard catchall"
[ 39.663] (**) ACPI video extension: Applying InputClass "Evdev=20
keyboard"
[ 39.663] (**) ACPI video extension: Applying InputClass=20
"libinput keyboard catchall"
[ 39.663] (**) ACPI video extension: Applying InputClass=20
"keyboard"
[ 39.663] (II) Using input driver 'libinput' for 'ACPI video=20
extension'
[ 39.663] (**) ACPI video extension: always reports core events
[ 39.663] (**) Option "Device" "/dev/input/event2"
[ 39.663] (**) Option "_source" "server/udev"
[ 39.667] (II) event2 - ACPI video extension: is tagged by=20
udev as: Keyboard
[ 39.667] (II) event2 - ACPI video extension: device is a=20
keyboard
[ 39.668] (II) event2 - ACPI video extension: device removed
[ 39.668] (**) Option "config_info" "udev:/dev/input/event2"
[ 39.668] (II) XINPUT: Adding extended input device "ACPI video=20
extension" (type: KEYBOARD, id 14)
[ 39.668] (**) Option "xkb_rules" "evdev"
[ 39.668] (**) Option "xkb_layout" "de,us,fr"
[ 39.668] (WW) Option "xkb_variant" requires a string value
[ 39.669] (II) event2 - ACPI video extension: is tagged by=20
udev as: Keyboard
[ 39.669] (II) event2 - ACPI video extension: device is a=20
keyboard
[ 39.670] (II) config/udev: Adding input device Sleep Button=20
(/dev/input/event3)
[ 39.670] (**) Sleep Button: Applying InputClass "evdev=20
keyboard catchall"
[ 39.670] (**) Sleep Button: Applying InputClass "Evdev=20
keyboard"
[ 39.670] (**) Sleep Button: Applying InputClass "libinput=20
keyboard catchall"
[ 39.670] (**) Sleep Button: Applying InputClass "keyboard"
[ 39.670] (II) Using input driver 'libinput' for 'Sleep Button'
[ 39.670] (**) Sleep Button: always reports core events
[ 39.670] (**) Option "Device" "/dev/input/event3"
[ 39.670] (**) Option "_source" "server/udev"
[ 39.671] (II) event3 - Sleep Button: is tagged by udev as:=20
Keyboard
[ 39.671] (II) event3 - Sleep Button: device is a keyboard
[ 39.672] (II) event3 - Sleep Button: device removed
[ 39.672] (**) Option "config_info" "udev:/dev/input/event3"
[ 39.672] (II) XINPUT: Adding extended input device "Sleep=20
Button" (type: KEYBOARD, id 15)
[ 39.672] (**) Option "xkb_rules" "evdev"
[ 39.672] (**) Option "xkb_layout" "de,us,fr"
[ 39.672] (WW) Option "xkb_variant" requires a string value
[ 39.673] (II) event3 - Sleep Button: is tagged by udev as:=20
Keyboard
[ 39.673] (II) event3 - Sleep Button: device is a keyboard
[ 39.674] (II) config/udev: Adding input device Control Method=20
Lid Switch (/dev/input/event4)
[ 39.674] (II) No input driver specified, ignoring this device.
[ 39.674] (II) This device may have been added with another=20
device file.
[ 39.674] (II) config/udev: Adding input device AT keyboard=20
(/dev/input/event5)
[ 39.674] (**) AT keyboard: Applying InputClass "evdev keyboard=20
catchall"
[ 39.674] (**) AT keyboard: Applying InputClass "Evdev=20
keyboard"
[ 39.674] (**) AT keyboard: Applying InputClass "libinput=20
keyboard catchall"
[ 39.674] (**) AT keyboard: Applying InputClass "keyboard"
[ 39.674] (II) Using input driver 'libinput' for 'AT keyboard'
[ 39.674] (**) AT keyboard: always reports core events
[ 39.674] (**) Option "Device" "/dev/input/event5"
[ 39.674] (**) Option "_source" "server/udev"
[ 39.675] (II) event5 - AT keyboard: is tagged by udev as:=20
Keyboard
[ 39.675] (II) event5 - AT keyboard: device is a keyboard
[ 39.677] (II) event5 - AT keyboard: device removed
[ 39.677] (**) Option "config_info" "udev:/dev/input/event5"
[ 39.678] (II) XINPUT: Adding extended input device "AT=20
keyboard" (type: KEYBOARD, id 16)
[ 39.678] (**) Option "xkb_rules" "evdev"
[ 39.678] (**) Option "xkb_layout" "de,us,fr"
[ 39.678] (WW) Option "xkb_variant" requires a string value
[ 39.679] (II) event5 - AT keyboard: is tagged by udev as:=20
Keyboard
[ 39.679] (II) event5 - AT keyboard: device is a keyboard
[ 39.681] (II) config/udev: Adding input device SynPS/2=20
Synaptics TouchPad (/dev/input/event6)
[ 39.681] (**) SynPS/2 Synaptics TouchPad: Applying InputClass=20
"evdev pointer catchall"
[ 39.681] (**) SynPS/2 Synaptics TouchPad: Applying InputClass=20
"evdev touchpad catchall"
[ 39.681] (**) SynPS/2 Synaptics TouchPad: Applying InputClass=20
"libinput pointer catchall"
[ 39.681] (**) SynPS/2 Synaptics TouchPad: Applying InputClass=20
"libinput touchpad catchall"
[ 39.681] (**) SynPS/2 Synaptics TouchPad: Applying InputClass=20
"touchpad catchall"
[ 39.681] (**) SynPS/2 Synaptics TouchPad: Applying InputClass=20
"Default clickpad buttons"
[ 39.681] (II) LoadModule: "synaptics"
[ 39.681] (II) Loading=20
/usr/local/lib/xorg/modules/input/synaptics_drv.so
[ 39.685] (II) Module synaptics: vendor=3D"X.Org Foundation"
[ 39.685] compiled for 1.21.1.4, module version =3D 1.9.1
[ 39.685] Module class: X.Org XInput Driver
[ 39.685] ABI class: X.Org XInput driver, version 24.4
[ 39.685] (II) Using input driver 'synaptics' for 'SynPS/2=20
Synaptics TouchPad'
[ 39.685] (**) SynPS/2 Synaptics TouchPad: always reports core=20
events
[ 39.685] (**) Option "Device" "/dev/input/event6"
[ 39.818] (II) synaptics: SynPS/2 Synaptics TouchPad: found=20
clickpad property
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis=20
range 1264 - 5678 (res 46)
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis=20
range 1132 - 4720 (res 60)
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure=20
range 0 - 255
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: finger=20
width range 0 - 15
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons:=20
left double triple
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor=20
0x2 Product 0x7
[ 39.818] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 39.818] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad=20
found
[ 39.818] (**) SynPS/2 Synaptics TouchPad: always reports core=20
events
[ 39.853] (**) Option "config_info" "udev:/dev/input/event6"
[ 39.853] (II) XINPUT: Adding extended input device "SynPS/2=20
Synaptics TouchPad" (type: TOUCHPAD, id 17)
[ 39.853] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)=20
MinSpeed is now constant deceleration 2.5
[ 39.853] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)=20
MaxSpeed is now 1.75
[ 39.853] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel)=20
AccelFactor is now 0.035
[ 39.853] (**) SynPS/2 Synaptics TouchPad: (accel) keeping=20
acceleration scheme 1
[ 39.853] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration=20
profile 1
[ 39.853] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration=20
factor: 2.000
[ 39.853] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration=20
threshold: 4
[ 39.901] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad=20
found
[ 39.902] (II) config/udev: Adding input device Generic PS/2=20
mouse (/dev/input/event7)
[ 39.902] (**) Generic PS/2 mouse: Applying InputClass "evdev=20
pointer catchall"
[ 39.902] (**) Generic PS/2 mouse: Applying InputClass=20
"libinput pointer catchall"
[ 39.902] (II) Using input driver 'libinput' for 'Generic PS/2=20
mouse'
[ 39.902] (**) Generic PS/2 mouse: always reports core events
[ 39.902] (**) Option "Device" "/dev/input/event7"
[ 39.902] (**) Option "_source" "server/udev"
[ 39.903] (II) event7 - Generic PS/2 mouse: is tagged by udev=20
as: Mouse
[ 39.903] (II) event7 - Generic PS/2 mouse: device is a=20
pointer
[ 39.904] (II) event7 - Generic PS/2 mouse: device removed
[ 39.904] (**) Option "config_info" "udev:/dev/input/event7"
[ 39.904] (II) XINPUT: Adding extended input device "Generic=20
PS/2 mouse" (type: MOUSE, id 18)
[ 39.904] (**) Option "AccelerationScheme" "none"
[ 39.904] (**) Generic PS/2 mouse: (accel) selected scheme=20
none/0
[ 39.904] (**) Generic PS/2 mouse: (accel) acceleration factor:=20
2.000
[ 39.904] (**) Generic PS/2 mouse: (accel) acceleration=20
threshold: 4
[ 39.905] (II) event7 - Generic PS/2 mouse: is tagged by udev=20
as: Mouse
[ 39.906] (II) event7 - Generic PS/2 mouse: device is a=20
pointer
[ 39.907] (II) config/udev: Adding input device CM Storm=20
Quickfire TKL 6keys (/dev/input/event8)
[ 39.907] (**) CM Storm Quickfire TKL 6keys: Applying=20
InputClass "evdev keyboard catchall"
[ 39.907] (**) CM Storm Quickfire TKL 6keys: Applying=20
InputClass "Evdev keyboard"
[ 39.907] (**) CM Storm Quickfire TKL 6keys: Applying=20
InputClass "libinput keyboard catchall"
[ 39.907] (**) CM Storm Quickfire TKL 6keys: Applying=20
InputClass "keyboard"
[ 39.907] (II) Using input driver 'libinput' for 'CM Storm=20
Quickfire TKL 6keys'
[ 39.907] (**) CM Storm Quickfire TKL 6keys: always reports=20
core events
[ 39.907] (**) Option "Device" "/dev/input/event8"
[ 39.907] (**) Option "_source" "server/udev"
[ 39.908] (II) event8 - CM Storm Quickfire TKL 6keys, class=20
0/0, rev 1.10/1.11, addr 6: is tagged by udev as: Keyboard
[ 39.908] (II) event8 - CM Storm Quickfire TKL 6keys, class=20
0/0, rev 1.10/1.11, addr 6: device is a keyboard
[ 39.909] (II) event8 - CM Storm Quickfire TKL 6keys, class=20
0/0, rev 1.10/1.11, addr 6: device removed
[ 39.909] (**) Option "config_info" "udev:/dev/input/event8"
[ 39.909] (II) XINPUT: Adding extended input device "CM Storm=20
Quickfire TKL 6keys" (type: KEYBOARD, id 19)
[ 39.909] (**) Option "xkb_rules" "evdev"
[ 39.909] (**) Option "xkb_layout" "de,us,fr"
[ 39.909] (WW) Option "xkb_variant" requires a string value
[ 39.910] (II) event8 - CM Storm Quickfire TKL 6keys, class=20
0/0, rev 1.10/1.11, addr 6: is tagged by udev as: Keyboard
[ 39.911] (II) event8 - CM Storm Quickfire TKL 6keys, class=20
0/0, rev 1.10/1.11, addr 6: device is a keyboard
[ 39.912] (II) config/udev: Adding input device La-VIEW=20
Technology SteelSeries (/dev/input/event9)
[ 39.912] (**) La-VIEW Technology SteelSeries: Applying=20
InputClass "evdev keyboard catchall"
[ 39.912] (**) La-VIEW Technology SteelSeries: Applying=20
InputClass "Evdev keyboard"
[ 39.912] (**) La-VIEW Technology SteelSeries: Applying=20
InputClass "libinput keyboard catchall"
[ 39.912] (**) La-VIEW Technology SteelSeries: Applying=20
InputClass "keyboard"
[ 39.912] (II) Using input driver 'libinput' for 'La-VIEW=20
Technology SteelSeries'
[ 39.912] (**) La-VIEW Technology SteelSeries: always reports=20
core events
[ 39.912] (**) Option "Device" "/dev/input/event9"
[ 39.912] (**) Option "_source" "server/udev"
[ 39.913] (II) event9 - La-VIEW Technology SteelSeries, class=20
0/0, rev 2.00/0.00, addr 7: is tagged by udev as: Keyboard
[ 39.913] (II) event9 - La-VIEW Technology SteelSeries, class=20
0/0, rev 2.00/0.00, addr 7: device is a keyboard
[ 39.914] (II) event9 - La-VIEW Technology SteelSeries, class=20
0/0, rev 2.00/0.00, addr 7: device removed
[ 39.914] (**) Option "config_info" "udev:/dev/input/event9"
[ 39.914] (II) XINPUT: Adding extended input device "La-VIEW=20
Technology SteelSeries" (type: KEYBOARD, id 20)
[ 39.914] (**) Option "xkb_rules" "evdev"
[ 39.914] (**) Option "xkb_layout" "de,us,fr"
[ 39.914] (WW) Option "xkb_variant" requires a string value
[ 39.915] (II) event9 - La-VIEW Technology SteelSeries, class=20
0/0, rev 2.00/0.00, addr 7: is tagged by udev as: Keyboard
[ 39.916] (II) event9 - La-VIEW Technology SteelSeries, class=20
0/0, rev 2.00/0.00, addr 7: device is a keyboard
[ 39.942] (**) Wacom Pen and multitouch sensor Pen eraser:=20
Applying InputClass "evdev tablet catchall"
[ 39.943] (**) Wacom Pen and multitouch sensor Pen eraser:=20
Applying InputClass "libinput tablet catchall"
[ 39.943] (**) Wacom Pen and multitouch sensor Pen eraser:=20
Applying InputClass "Wacom USB tablet class"
[ 39.943] (**) Wacom Pen and multitouch sensor Pen eraser:=20
Applying InputClass "Wacom tablet class"
[ 39.943] (II) Using input driver 'wacom' for 'Wacom Pen and=20
multitouch sensor Pen eraser'
[ 39.943] (**) Wacom Pen and multitouch sensor Pen eraser:=20
always reports core events
[ 39.943] (**) Option "Device" "/dev/input/event16"
[ 39.943] (**) Option "Type" "eraser"
[ 39.944] (**) Wacom Pen and multitouch sensor Pen eraser:=20
panscroll is 1300
[ 39.944] (**) Wacom Pen and multitouch sensor Pen eraser:=20
panscroll modified to 1300
[ 39.944] (--) Wacom Pen and multitouch sensor Pen eraser:=20
maxX=3D30935 maxY=3D17401 maxZ=3D4095 resX=3D100000 resY=3D100000=20
tilt=3Denabled
[ 39.945] (**) Option "config_info" "udev:/dev/input/event16"
[ 39.945] (II) XINPUT: Adding extended input device "Wacom Pen=20
and multitouch sensor Pen eraser" (type: ERASER, id 21)
[ 39.945] (**) Wacom Pen and multitouch sensor Pen eraser:=20
(accel) keeping acceleration scheme 1
[ 39.945] (**) Wacom Pen and multitouch sensor Pen eraser:=20
(accel) acceleration profile 0
[ 39.945] (**) Wacom Pen and multitouch sensor Pen eraser:=20
(accel) acceleration factor: 2.000
[ 39.945] (**) Wacom Pen and multitouch sensor Pen eraser:=20
(accel) acceleration threshold: 4
[ 40.569] (II) intel(0): EDID vendor "AUO", prod id 8246
[ 40.569] (II) intel(0): Printing DDC gathered Modelines:
[ 40.569] (II) intel(0): Modeline "2560x1440"x0.0 245.50 2560=20
2608 2640 2720 1440 1443 1448 1504 -hsync -vsync (90.3 kHz eP)
[ 40.923] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.303] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.306] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.306] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.306] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.307] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.308] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.308] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.309] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.310] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.310] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.311] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.311] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.311] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.313] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.313] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.313] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.315] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.315] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.315] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.332] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.334] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.568] (II) intel(0): resizing framebuffer to 5568x3132
[ 45.615] (II) intel(0): switch to mode 3840x2160@30.0 on=20
HDMI-1 using pipe 1, position (0, 0), rotation normal, reflection=20
none
[ 45.712] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.719] (II) intel(0): resizing framebuffer to 8128x3132
[ 45.799] (II) intel(0): switch to mode 3840x2160@30.0 on=20
HDMI-1 using pipe 1, position (2560, 0), rotation normal,=20
reflection none
[ 45.887] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 45.934] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 46.388] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 46.389] (--) intel(0): HDMI max TMDS frequency 300000KHz
[ 1004.147] (II) event14 - La-VIEW Technology SteelSeries, class=20
0/0, rev 2.00/0.00, addr 7: SYN_DROPPED event - some input events=20
have been lost.
--=20
Mathias Picker=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=
=20=20=20=20
Gesch=C3=A4ftsf=C3=BChrer
Mathias.Picker@virtual-earth.de
virtual earth Gesellschaft f=C3=BCr Wissens re/pr=C3=A4 sentation mbH
http://www.virtual-earth.de/ HRB126870
support@virtual-earth.de Westendstr. 142
089 / 1250 3943=20=20=20=20=20=20=20=20=20=20=20=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?86cz5yf4zc.fsf>