Date: Sun, 11 Mar 2001 17:57:39 -0500 (EST) From: "G. Jason Middleton" <gmiddl1@gl.umbc.edu> To: <freebsd-questions@freebsd.org> Subject: ARP!! Message-ID: <Pine.LNX.4.31L.02.0103111755500.3412-100000@linux3.gl.umbc.edu>
next in thread | raw e-mail | index | archive | help
arp: 00:48:54:8b:5f:88 is using my IP address 65.9.249.190
i get this in my dmesg...but i can still talk to the outside world
here is my dmesg...what shall i do?
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Thu Mar 1 16:34:08 EST 2001
root@cc502667-a.catv1.md.home.com:/usr/src/sys/compile/BSDBOX
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (132.96-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 50331648 (49152K bytes)
avail memory = 45740032 (44668K bytes)
Preloaded elf kernel "kernel" at 0xc034f000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371FB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX ATA controller> port 0xfff0-0xffff at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
de0: <Digital 21140A Fast Ethernet> port 0xf680-0xf6ff mem
0xffeefb80-0xffeefbff irq 9 at device 8.0 on pci0
de0: 21140A [10-100Mb/s] pass 2.0
de0: address 00:40:05:31:96:2b
dc0: <ADMtek AN985 10/100BaseTX> port 0xf700-0xf7ff mem
0xffeefc00-0xffeeffff irq 10 at device 9.0 on pci0
dc0: Ethernet address: 00:03:6d:17:b4:98
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <S3 ViRGE graphics accelerator> at 10.0 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding
disabled, default to accept, logging disabled
ad0: 8063MB <SAMSUNG SV0844A> [16383/16/63] at ata0-master WDMA2
Mounting root from ufs:/dev/ad0s1a
arp: 00:48:54:8b:5f:88 is using my IP address 65.9.249.190!
thanks in advance
G. Jason Middleton
_______________________________________________________________________________
Announcement:
The revolution will not be televised.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.31L.02.0103111755500.3412-100000>