Date: Wed, 15 Aug 2001 13:38:20 -0400 From: "Jason P . Stanford" <jps3@acs.art.lehigh.edu> To: newbie@xfree86.org, questions@freebsd.org Subject: /dev/io error w/XFree86 4.1.0 Message-ID: <20010815133820.A18741@acs.art.lehigh.edu>
next in thread | raw e-mail | index | archive | help
--qDbXVdCdHGoSgWSk Content-Type: text/plain; charset=us-ascii Content-Disposition: inline (Posted to newbie@xfree86.org and questions@freebsd.org) I just put together a small server/workstation for personal use and education for use with FreeBSD (currently 4.4PRE). I downloaded and installed the latest XFree86, v4.1.0. But when I run 'xf86cfg' (which I understand to be the current config tool, rather than XF86Setup) an 'I/O' error occurs (please see the attached files XFree86.err and dmesg.out). The mainboard is an Intel D815EFVL which uses the 815E chipset. I see that the 4.1.0 docs say the 815 is supported by the 810 drivers, but might the 815E not be supported? Is the I/O error something to do with the security level I set for FreeBSD possibly? Mainboard info is here: http://developer.intel.com/design/motherbd/fv/index.htm Thanks for any help. -Jason -- Taurus: (April. 20--May 20) You pride yourself on learning something new every day, but next Wednesday will provide you with a greater education in primate anatomy and high-energy physics than you really wanted. --qDbXVdCdHGoSgWSk Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="XFree86.err" XFree86 Version 4.1.0 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: FreeBSD 4.2-BETA i386 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.8.log", Time: Tue Aug 14 16:47:27 2001 (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 Fatal server error: xf86EnableIO: Failed to open /dev/io for extended I/O When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.8.log". Please report problems to xfree86@xfree86.org. --qDbXVdCdHGoSgWSk Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.out" _CN.gbk/Compose Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... done Uptime: 17m39s Rebooting... Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-PRERELEASE #1: Tue Aug 14 11:09:16 EDT 2001 root@:/usr/obj/usr/src/sys/BSD44PRE-010812 Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (797.42-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 401342464 (391936K bytes) avail memory = 387375104 (378296K bytes) Preloaded elf kernel "kernel" at 0xc0321000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <Intel model 1132 VGA-compatible display device> at 2.0 irq 11 pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 fxp0: <Intel Pro/100 Ethernet> port 0xde80-0xdebf mem 0xff8fe000-0xff8fefff irq 11 at device 8.0 on pci1 fxp0: Ethernet address 00:03:47:9e:db:df inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto an0: <Aironet PCI350> port 0xdf00-0xdf3f,0xdc00-0xdc7f mem 0xff8ffc00-0xff8ffc7f irq 11 at device 10.0 on pci1 an0: Ethernet address: 00:40:96:3a:64:04 isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 ATA100 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq 11 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Chicony Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2 uhub1: 3 ports with 2 removable, bus powered ukbd0: Chicony PFU-65 USB Keyboard, rev 1.10/1.00, addr 3, iclass 3/1 kbd0 at ukbd0 pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 9 uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq 10 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 9 orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xcc000-0xcd7ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 19546MB <FUJITSU MPG3204AT E> [39714/16/63] at ata0-master UDMA100 acd0: CDROM <CDU5211> at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s1a --qDbXVdCdHGoSgWSk-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010815133820.A18741>