Date: Mon, 10 Jul 2000 12:48:15 -0700 (PDT) From: Matthew Jacob <mjacob@feral.com> To: Mark Murray <mark@grondar.za> Cc: wpaul@FreeBSD.ORG, current@FreeBSD.ORG Subject: Re: if_de as a module... Message-ID: <Pine.BSF.4.05.10007101245500.98701-100000@semuta.feral.com> In-Reply-To: <Pine.BSF.4.05.10007101149150.98701-100000@semuta.feral.com>
next in thread | previous in thread | raw e-mail | index | archive | help
>
> *I'll* check it too- I'd *love* to have if_de as a loadable since most of the
> alphas I have use if_de (not dc)!
Umm- started okay:
de0: <Digital 21140A Fast Ethernet> port 0x10300-0x1037f mem
0x82083000-0x8208307f irq 3 at device 9.0 on pci0
de0: interrupting at CIA irq 3
de0: 21140A [10-100Mb/s] pass 2.2
de0: address 00:40:05:41:5b:e6
bpf: de0 attached
de0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.67.166.23 netmask 0xffffff00 broadcast 192.67.166.255
ether 00:40:05:41:5b:e6
media: autoselect
supported media: autoselect 100baseTX <full-duplex> 100baseTX
10baseT/UTP <full-duplex> 10baseT/UTP
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
add net default: gateway 192.67.166.1
Additional routing options: tcp arplookup 192.67.166.155 failed: could not
allocate llinfo
arpresolve: can't allocate llinfo for 192.67.166.155rt
extensions=NO IP gateway=YES TCP keepalive=YES.
routing daemons:.
...
but then failed with:
arplookup 192.67.166.155 failed: could not allocate llinfo
arpresolve: can't allocate llinfo for 192.67.166.155rt
arplookup 192.67.166.155 failed: could not allocate llinfo
arpresolve: can't allocate llinfo for 192.67.166.155rt
arplookup 192.67.166.155 failed: could not allocate llinfo
arpresolve: can't allocate llinfo for 192.67.166.155rt
....
and then died:
rplookup 192.67.166.155 failed: could not allocate llinfo
arpresolve: can't allocate llinfo for 192.67.166.155rt
arplookup 192.67.166.155 failed: could not allocate llinfo
arpresolve: can't allocate llinfo for 192.67.166.155rt
arplookup 192.67.166.155 failed: could not allocate llinfo
arpresolve: can't allocate llinfo for 192.67.166.155rt
NFS Portmap: RPC: Port mapper failure - RPC: Timed out
fatal kernel trap:
trap entry = 0x2 (memory management fault)
a0 = 0x0
a1 = 0x1
a2 = 0xffffffffffffffff
pc = 0x0
ra = 0xfffffc00004cb4e0
curproc = 0
ddbprinttrap from 0x0
ddbprinttrap(0x0, 0x1, 0xffffffffffffffff, 0x2)
panic: trap
panic
Stopped at Debugger+0x2c: ldq ra,0(sp) <0xfffffe0009805a00>
<ra=0xfffffc00004d0ca0,sp=0xfffffe0009805a00>
db> t
Debugger() at Debugger+0x2c
panic() at panic+0x100
trap() at trap+0x630
XentMM() at XentMM+0x20
swi_net() at swi_net+0x40
(null)() at 0x1
-----------------------
*sigh* (whimper)
> On Mon, 10 Jul 2000, Mark Murray wrote:
>
> > Hi Bill
> >
> > If I apply the enclosed patch to sys/pci/if_de.c, and make a
> > copy of (say) sys/modules/dc to sys/modules/de (while changing
> > all relevant dc --> de), I can build a loadable module for de.
> >
> > Could you please check that this works in your (no doubt)
> > excellent laboratory and either commit or review for me to
> > commit.
> >
> > Thanks! :-)
> >
> > M
> >
> > Index: sys/pci/if_de.c
> > ===================================================================
> > RCS file: /home/ncvs/src/sys/pci/if_de.c,v
> > retrieving revision 1.129
> > diff -u -d -r1.129 if_de.c
> > --- sys/pci/if_de.c 2000/05/28 16:06:56 1.129
> > +++ sys/pci/if_de.c 2000/07/09 08:27:09
> > @@ -54,10 +54,9 @@
> > #include <sys/bus.h>
> > #include <sys/rman.h>
> >
> > -#include "opt_inet.h"
> > -#include "opt_ipx.h"
> > -
> > #include <net/if.h>
> > +#include <net/if_arp.h>
> > +#include <net/ethernet.h>
> > #include <net/if_media.h>
> > #include <net/if_dl.h>
> > #ifdef TULIP_USE_SOFTINTR
> >
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-current" in the body of the message
> >
>
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-current" in the body of the message
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.10007101245500.98701-100000>