Date: Wed, 17 Apr 2002 16:38:51 -0700 From: "Joshua Speer" <jspeer@sbcglobal.net> To: <freebsd-questions@freebsd.org> Subject: Fw: System hang Message-ID: <001f01c1e669$07d97190$9865fea9@SMFA01824>
next in thread | raw e-mail | index | archive | help
----- Original Message ----- From: "Joshua Speer" <jspeer@sbcglobal.net> To: <ulairi@ulairi.org> Sent: Wednesday, April 17, 2002 4:26 PM Subject: Re: System hang > ----- Original Message ----- > From: <ulairi@ulairi.org> > To: "Joshua Speer" <jspeer@sbcglobal.net> > Cc: <freebsd-questions@freebsd.org> > Sent: Wednesday, April 17, 2002 2:02 AM > Subject: Re: System hang > > > > Quoting Joshua Speer <jspeer@sbcglobal.net>: > > > > > Hello, > > > > > > Let me know if I need to post this in a different location for best > results. > > > > <SNIP> > > > > Could you dump your dmesg into here? > > I ran into a problem with 4.5R on SMP with APM enabled in the kernel. If > you > > have that enabled, try disabling it and see if that makes a difference. > > > > Thanks for the reply, I was wondering about apm myself. It is enabled in the > kernel, but nothing in dmesg about it. > > Copyright (c) 1992-2002 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.5-RELEASE #3: Wed Feb 20 13:52:08 PST 2002 > root@twinpeaks.tekkietoys.com:/usr/src/sys/compile/JOSH > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium III/Pentium III Xeon/Celeron (548.18-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x673 Stepping = 3 > > Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CM > OV,PAT,PSE36,PN,MMX,FXSR,SSE> > real memory = 536739840 (524160K bytes) > avail memory = 518516736 (506364K bytes) > Programming 24 pins in IOAPIC #0 > IOAPIC #0 intpin 2 -> irq 0 > Programming 24 pins in IOAPIC #1 > FreeBSD/SMP: Multiprocessor motherboard > cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 > cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 > io0 (APIC): apic id: 2, version: 0x00170020, at 0xfec00000 > io1 (APIC): apic id: 3, version: 0x00178020, at 0xfc8df000 > Preloaded elf kernel "kernel" at 0xc03ab000. > Pentium Pro MTRR support enabled > md0: Malloc disk > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > IOAPIC #0 intpin 19 -> irq 2 > IOAPIC #0 intpin 17 -> irq 16 > pci0: <PCI bus> on pcib0 > pcib1: <PCI to PCI bridge (vendor=8086 device=1a23)> at device 1.0 on pci0 > IOAPIC #0 intpin 16 -> irq 17 > pci5: <PCI bus> on pcib1 > pci5: <ATI Mach64-GB graphics accelerator> at 0.0 irq 17 > pcib2: <PCI to PCI bridge (vendor=8086 device=1a24)> at device 2.0 on pci0 > pci3: <PCI bus> on pcib2 > pcib3: <PCI to PCI bridge (vendor=8086 device=1360)> at device 31.0 on pci3 > IOAPIC #1 intpin 8 -> irq 18 > IOAPIC #1 intpin 9 -> irq 19 > pci4: <PCI bus> on pcib3 > pci4: <unknown card> (vendor=0x8086, dev=0x1161) at 0.0 > sym0: <896> port 0xb400-0xb4ff mem > 0xfc8e0000-0xfc8e1fff,0xfc8e8000-0xfc8e83ff i > rq 18 at device 9.0 on pci4 > sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking > sym0: open drain IRQ line driver, using on-chip SRAM > sym0: using LOAD/STORE-based firmware. > sym0: handling phase mismatch from SCRIPTS. > sym1: <896> port 0xb800-0xb8ff mem > 0xfc8f0000-0xfc8f1fff,0xfc8f8000-0xfc8f83ff i > rq 19 at device 9.1 on pci4 > sym1: Symbios NVRAM, ID 7, Fast-40, SE, parity checking > sym1: open drain IRQ line driver, using on-chip SRAM > sym1: using LOAD/STORE-based firmware. > sym1: handling phase mismatch from SCRIPTS. > pcib4: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0 > IOAPIC #0 intpin 18 -> irq 20 > pci1: <PCI bus> on pcib4 > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xaf00-0xaf3f mem > 0xfc400000-0xfc4f > ffff,0xfc5f7000-0xfc5f7fff irq 17 at device 8.0 on pci1 > fxp0: Ethernet address 00:e0:81:10:cb:ad > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > pcib5: <PCI to PCI bridge (vendor=1044 device=a500)> at device 10.0 on pci1 > pci2: <PCI bus> on pcib5 > asr0: <Adaptec Caching SCSI RAID> mem 0xd0000000-0xdfffffff irq 20 at device > 10. > 1 on pci1 > asr0: major=154 > asr0: DPT PM2564U3 FW Rev. 3013, 1 channel, 256 CCBs, Protocol I2O > fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xaf80-0xaf9f mem > 0xfc700000-0xfc7f > ffff,0xeb9ff000-0xeb9fffff irq 2 at device 11.0 on pci1 > fxp1: Ethernet address 00:a0:c9:cc:4b:81 > inphy1: <i82555 10/100 media interface> on miibus1 > inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on > pci0 > ata0: at 0x1f0 irq 14 on atapci0 > uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 2 at > device 3 > 1.2 on pci0 > usb0: <Intel 82801AA (ICH) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 16 > chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port > 0xef00-0xef3f,0xe800-0x > e8ff irq 16 at device 31.5 on pci0 > orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xd0fff > on > isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x100> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A, console > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/8 bytes threshold > APIC_IO: Testing 8254 interrupt delivery > APIC_IO: routing 8254 via IOAPIC #0 intpin 2 > IP Filter: v3.4.20 initialized. Default = block all, Logging = enabled > Waiting 15 seconds for SCSI devices to settle > (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. > (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. > SMP: AP CPU #1 Launched! > da1 at asr0 bus 0 target 0 lun 0 > da1: <DPT RAID-5 3013> Fixed Direct Access SCSI-2 device > da1: 105010MB (215060480 512 byte sectors: 255H 63S/T 13386C) > da0 at sym1 bus 0 target 0 lun 0 > da0: <IBM DNES-309170W SA30> Fixed Direct Access SCSI-3 device > da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing > Enabled > da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) > cd0 at sym1 bus 0 target 2 lun 0 > cd0: <MATSHITA CD-R CW-7502 4.17> Removable CD-ROM SCSI-2 device > cd0: 10.000MB/s transfers (10.000MHz, offset 8) > cd0: Attempt to query device size failed: NOT READY, Medium not present - > tray c > losed > cd1 at sym1 bus 0 target 5 lun 0 > cd1: <TOSHIBA CD-ROM XM-6401TA 1015> Removable CD-ROM SCSI-2 device > cd1: 20.000MB/s transfers (20.000MHz, offset 16) > cd1: Attempt to query device size failed: NOT READY, Medium not present > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001f01c1e669$07d97190$9865fea9>