From owner-freebsd-current@FreeBSD.ORG Tue Sep 28 18:30:47 2004 Return-Path: Delivered-To: freebsd-current@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 2BF5516A4CE for ; Tue, 28 Sep 2004 18:30:47 +0000 (GMT) Received: from mout1.freenet.de (mout1.freenet.de [194.97.50.132]) by mx1.FreeBSD.org (Postfix) with ESMTP id 41EF843D2F for ; Tue, 28 Sep 2004 18:30:46 +0000 (GMT) (envelope-from jwolz@freenet.de) Received: from [194.97.50.136] (helo=mx3.freenet.de) by mout1.freenet.de with esmtpa (Exim 4.42) id 1CCMkP-0000Hm-Lb for freebsd-current@freebsd.org; Tue, 28 Sep 2004 20:30:45 +0200 Received: from p5083cecd.dip0.t-ipconnect.de ([80.131.206.205] helo=pc1) #1) id 1CCMkO-0007qG-4Q for freebsd-current@freebsd.org; Tue, 28 Sep 2004 20:30:45 +0200 Received: from jonas by pc1 with local (Exim 3.35 #1 (Debian)) id 1CCMkN-0000a4-00 for ; Tue, 28 Sep 2004 20:30:43 +0200 From: Jonas Wolz To: freebsd-current@freebsd.org Date: Tue, 28 Sep 2004 20:30:42 +0200 User-Agent: KMail/1.6 MIME-Version: 1.0 Content-Disposition: inline Content-Type: Multipart/Mixed; boundary="Boundary-00=_S3aWB5bNQ54nbHk" Message-Id: <200409282030.42870.jonas.wolz@freenet.de> Sender: Jonas Wolz Subject: "ad2: TIMEOUT - READ_DMA retrying (2 retries left) LBA=23444158" with BETA6 X-BeenThere: freebsd-current@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Discussions about the use of FreeBSD-current List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 28 Sep 2004 18:30:47 -0000 --Boundary-00=_S3aWB5bNQ54nbHk Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi, this is kind of a "me too"-posting for the similar issue (with BETA5) reported last week on this list. On my Acer Aspire 1705SCi "laptop" (P4 processor with Hyperthreading enabled) I tried booting BETA6 from the disc2 CD-ROM today, which seems to work fine except that the error message "ad2: TIMEOUT - READ_DMA retrying (2 retries left) LBA=234441585" is printed once on boot-up (and just on boot-up so far). It doesn't matter if I boot with ACPI enabled or disabled. The reported LBA is always the same (the harddisk's SMART data looks fine, however). Nevertheless, I can read from the hard disk and mount file systems on it without apparent problems (and without the message getting printed again). FreeBSD 5.2.1 (currently installed on that computer) doesn't have this problem. I've attached the dmesg of BETA6. Jonas Wolz --Boundary-00=_S3aWB5bNQ54nbHk Content-Type: text/plain; charset="us-ascii"; name="dmesg.nobby.BETA6" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.nobby.BETA6" Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA6 #0: Sat Sep 25 19:41:14 UTC 2004 root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e44000. Preloaded mfs_root "/boot/mfsroot" at 0xc0e4426c. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e442b0. Calibrating clock(s) ... i8254 clock: 1193202 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3054282612 Hz CPU: Intel(R) Pentium(R) 4 CPU 3.06GHz (3054.28-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff Hyperthreading: 2 logical CPUs real memory = 534708224 (509 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001029000 - 0x000000001f4c8fff, 508166144 bytes (124064 pages) avail memory = 509399040 (485 MB) Table 'FACP' at 0x1fdfaecf Table 'SSDT' at 0x1fdfaf43 Table 'APIC' at 0x1fdfaf7a MADT: Found table at 0x1fdfaf7a MP Configuration Table version 1.4 found at 0xc009fc70 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) ACPI APIC Table: APIC ID: physical 0, logical 0:0 APIC ID: physical 1, logical 0:1 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f6e60 bios32: Entry = 0xfd840 (c00fd840) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd840+0x186 pnpbios: Found PnP BIOS data at 0xc00f6ee0 pnpbios: Entry = f0000:b303 Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 ioapic0: intpin 0 -> ExtINT (edge, high) ioapic0: intpin 1 -> ISA IRQ 1 (edge, high) ioapic0: intpin 2 -> ISA IRQ 2 (edge, high) ioapic0: intpin 3 -> ISA IRQ 3 (edge, high) ioapic0: intpin 4 -> ISA IRQ 4 (edge, high) ioapic0: intpin 5 -> ISA IRQ 5 (edge, high) ioapic0: intpin 6 -> ISA IRQ 6 (edge, high) ioapic0: intpin 7 -> ISA IRQ 7 (edge, high) ioapic0: intpin 8 -> ISA IRQ 8 (edge, high) ioapic0: intpin 9 -> ISA IRQ 9 (edge, high) ioapic0: intpin 10 -> ISA IRQ 10 (edge, high) ioapic0: intpin 11 -> ISA IRQ 11 (edge, high) ioapic0: intpin 12 -> ISA IRQ 12 (edge, high) ioapic0: intpin 13 -> ISA IRQ 13 (edge, high) ioapic0: intpin 14 -> ISA IRQ 14 (edge, high) ioapic0: intpin 15 -> ISA IRQ 15 (edge, high) ioapic0: intpin 16 -> PCI IRQ 16 (level, low) ioapic0: intpin 17 -> PCI IRQ 17 (level, low) ioapic0: intpin 18 -> PCI IRQ 18 (level, low) ioapic0: intpin 19 -> PCI IRQ 19 (level, low) ioapic0: intpin 20 -> PCI IRQ 20 (level, low) ioapic0: intpin 21 -> PCI IRQ 21 (level, low) ioapic0: intpin 22 -> PCI IRQ 22 (level, low) ioapic0: intpin 23 -> PCI IRQ 23 (level, low) MADT: intr override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 ioapic0: intpin 2 trigger: edge ioapic0: intpin 2 polarity: high lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: active-high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: active-high MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff wlan: <802.11 Link Layer> random: io: mem: Pentium Pro MTRR support enabled null: npx0: [FAST] npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND SearchNode 0xc1db5c00 StartNode 0xc1db5c00 ReturnNode 0 ACPI-1303: *** Error: [NULL NAME], AE_NOT_FOUND pci_open(1): mode 1 addr port (0x0cf8) is 0x80001048 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06501039) pcibios: BIOS version 2.10 Found $PIR table, 7 entries at 0xc00fdf50 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 1 A 0x41 7 10 embedded 0 1 B 0x43 5 10 embedded 0 2 B 0x42 3 4 embedded 0 2 C 0x43 5 10 embedded 0 3 A 0x60 7 10 embedded 0 3 B 0x61 7 10 embedded 0 3 C 0x62 7 10 embedded 0 3 D 0x63 7 10 embedded 0 4 A 0x44 7 10 embedded 0 10 A 0x42 3 4 embedded 0 11 A 0x43 5 10 embedded 0 11 B 0x44 7 10 AcpiOsDerivePciId: bus 0 dev 2 func 0 acpi0: Power Button (fixed) AcpiOsDerivePciId: bus 0 dev 0 func 0 ACPI-0290: *** Error: Return object type is incorrect [\\_SB_.PCI0.LPCB.LNKA._CRS] (Node 0xc1d6da60), AE_TYPE can't fetch resources for \\_SB_.PCI0.LPCB.LNKA - AE_TYPE ACPI-0290: *** Error: Return object type is incorrect [\\_SB_.PCI0.LPCB.LNKC._CRS] (Node 0xc1d6d860), AE_TYPE can't fetch resources for \\_SB_.PCI0.LPCB.LNKC - AE_TYPE ACPI-0290: *** Error: Return object type is incorrect [\\_SB_.PCI0.LPCB.LNKD._CRS] (Node 0xc1d6d760), AE_TYPE can't fetch resources for \\_SB_.PCI0.LPCB.LNKD - AE_TYPE ACPI-0290: *** Error: Return object type is incorrect [\\_SB_.PCI0.LPCB.LNKE._CRS] (Node 0xc1d6d660), AE_TYPE can't fetch resources for \\_SB_.PCI0.LPCB.LNKE - AE_TYPE ACPI-0290: *** Error: Return object type is incorrect [\\_SB_.PCI0.LPCB.LNKF._CRS] (Node 0xc1db2920), AE_TYPE can't fetch resources for \\_SB_.PCI0.LPCB.LNKF - AE_TYPE ACPI-0290: *** Error: Return object type is incorrect [\\_SB_.PCI0.LPCB.LNKG._CRS] (Node 0xc1db2820), AE_TYPE can't fetch resources for \\_SB_.PCI0.LPCB.LNKG - AE_TYPE acpi_ec0: port 0x66,0x62 on acpi0 acpi_ec0: info: new max delay is 50 us acpi_ec0: info: new max delay is 790 us acpi_ec0: info: new max delay is 1000 us ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 ACPI timer looks GOOD min = 2, max = 3, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 cpu0: on acpi0 cpu1: on acpi0 acpi_tz0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ACPI PCI link initial configuration: pci0: on pcib0 pci0: physical bus=0 map[10]: type 1, range 32, base e0000000, size 26, enabled found-> vendor=0x1039, dev=0x0650, revid=0x80 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1039, dev=0x0001, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x1039, dev=0x0008, revid=0x14 bus=0, slot=2, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 1, range 32, base e4000000, size 12, memory disabled found-> vendor=0x1039, dev=0x7007, revid=0x00 bus=0, slot=2, func=3 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x0c (3000 ns) intpin=b, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 00001000, size 4, enabled found-> vendor=0x1039, dev=0x5513, revid=0x00 bus=0, slot=2, func=5 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[10]: type 4, range 32, base 00001400, size 8, port disabled map[14]: type 4, range 32, base 00001080, size 7, enabled found-> vendor=0x1039, dev=0x7013, revid=0xa0 bus=0, slot=2, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns) intpin=c, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00001c00, size 8, port disabled map[14]: type 4, range 32, base 00001800, size 7, enabled pcib0: matched entry for 0.2.INTC pcib0: slot 2 INTC hardwired to IRQ 18 found-> vendor=0x1039, dev=0x7012, revid=0xa0 bus=0, slot=2, func=7 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns) intpin=c, irq=18 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e4001000, size 12, enabled pcib0: matched entry for 0.3.INTA pcib0: slot 3 INTA hardwired to IRQ 20 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=a, irq=20 map[10]: type 1, range 32, base e4002000, size 12, enabled pcib0: matched entry for 0.3.INTB pcib0: slot 3 INTB hardwired to IRQ 21 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=b, irq=21 map[10]: type 1, range 32, base e4003000, size 12, enabled pcib0: matched entry for 0.3.INTC pcib0: slot 3 INTC hardwired to IRQ 22 found-> vendor=0x1039, dev=0x7001, revid=0x0f bus=0, slot=3, func=2 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=c, irq=22 map[10]: type 1, range 32, base e4004000, size 12, memory disabled found-> vendor=0x1039, dev=0x7002, revid=0x00 bus=0, slot=3, func=3 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns) intpin=d, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002000, size 8, enabled map[14]: type 1, range 32, base e4005000, size 12, enabled pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 19 found-> vendor=0x1039, dev=0x0900, revid=0x91 bus=0, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns) intpin=a, irq=19 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x1217, dev=0x6972, revid=0x00 bus=0, slot=10, func=0 class=06-07-00, hdrtype=0x02, mfdev=0 cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base e4006000, size 12, memory disabled pcib0: matched entry for 0.11.INTA pcib0: slot 11 INTA hardwired to IRQ 18 found-> vendor=0x1260, dev=0x3872, revid=0x01 bus=0, slot=11, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0010, statreg=0x0290, cachelnsz=4 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=18 powerspec 2 supports D0 D1 D2 D3 current D0 agp0: mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000 agp0: allocating GATT for aperture of size 64M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xe5000000-0xe5ffffff pcib1: prefetched decode 0xe8000000-0xefffffff ACPI PCI link initial configuration: pci1: on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base e5000000, size 24, enabled pcib1: device (null) requested decoded memory range 0xe5000000-0xe5ffffff map[14]: type 3, range 32, base e8000000, size 27, enabled pcib1: device (null) requested decoded memory range 0xe8000000-0xefffffff pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 found-> vendor=0x10de, dev=0x031a, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=16 powerspec 2 supports D0 D3 current D0 pci1: at device 0.0 (no driver attached) isab0: at device 2.0 on pci0 isa0: on isab0 fwohci0: mem 0xe4000000-0xe4000fff at device 2.3 on pci0 fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4000000 pcib0: matched entry for 0.2.INTB pcib0: slot 2 INTB hardwired to IRQ 17 fwohci0: [MPSAFE] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:c0:9f:00:00:0c:a4:05 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:c0:9f:0c:a4:05 fwe0: bpf attached fwe0: Ethernet address: 02:c0:9f:0c:a4:05 fwe0: if_start running deferred for Giant sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) atapci0: port 0x1000-0x100f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1000 ata0: channel #0 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=10 stat1=00 devices=0x4 ata0: [MPSAFE] ata1: channel #1 on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ata1-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=50 stat1=00 devices=0x1 ata1: [MPSAFE] pci0: at device 2.6 (no driver attached) pci0: at device 2.7 (no driver attached) ohci0: mem 0xe4001000-0xe4001fff irq 20 at device 3.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4001000 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: mem 0xe4002000-0xe4002fff irq 21 at device 3.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4002000 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: on ohci1 usb1: USB revision 1.0 uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci2: mem 0xe4003000-0xe4003fff irq 22 at device 3.2 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4003000 ohci2: [GIANT-LOCKED] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: on ohci2 usb2: USB revision 1.0 uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ukbd0: Cherry Mikroschalter My3000 keyboard, rev 1.00/9.08, addr 2, iclass 3/1 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000 pci0: at device 3.3 (no driver attached) sis0: port 0x2000-0x20ff mem 0xe4005000-0xe4005fff irq 19 at device 4.0 on pci0 sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x2000 miibus0: on sis0 acphy0: on miibus0 acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto sis0: bpf attached sis0: Ethernet address: 00:c0:9f:28:24:60 sis0: [MPSAFE] cbb0: at device 10.0 on pci0 cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: matched entry for 0.10.INTA pcib0: slot 10 INTA hardwired to IRQ 17 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x69721217 0x04100007 0x06070000 0x00024000 0x10: 0x80000000 0x020000a0 0x20030300 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 0x30: 0x00000001 0x0000fffd 0x00000001 0x04000111 0x40: 0x00281025 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x01881882 0x90: 0x00008002 0x00000000 0x00000000 0x00000000 0xa0: 0xfe020001 0x00c04100 0x00000000 0x00000001 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x08004000 0x028203ca 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 wi0: mem 0xe4006000-0xe4006fff irq 18 at device 11.0 on pci0 wi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe4006000 wi0: [MPSAFE] wi0: using RF:PRISM3(Mini-PCI) wi0: Intersil Firmware: Primary (1.1.1), Station (1.5.6) wi0: bpf attached wi0: Ethernet address: 00:02:8a:a0:8a:96 wi0: bpf attached wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wi0: bpf attached acpi_button0: on acpi0 acpi_lid0: on acpi0 acpi_button1: on acpi0 acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ahc_isa_probe 1: ioport 0x1c00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xdc000-0xe3fff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x81 0x81 0x81 0x81 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 3054282612 Hz quality -100 Timecounters tick every 10.000 msec lo0: bpf attached md0: Preloaded image 4423680 bytes at 0xc09b6c5c acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin ATAPI_RESET time = 130us GEOM: Configure md0a, start 0 length 4423680 end 4423679 GEOM: Configure md0c, start 0 length 4423680 end 4423679 [0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000 ata0-master: setting PIO4 on SiS 5513 chip ata0-master: setting UDMA33 on SiS 5513 chip acpi_ec0: info: new max delay is 11000 us ACPI-0438: *** Error: Looking up [Z00D] in namespace, AE_NOT_FOUND SearchNode 0xc1db5c00 StartNode 0xc1db5c00 ReturnNode 0 ACPI-1303: *** Error: [NULL NAME], AE_NOT_FOUND ACPI-1303: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc1db5b40), AE_NOT_FOUND acpi_cmbat0: error fetching current battery status -- AE_NOT_FOUND acpi_cmbat0: battery initialization done, tried 1 times acd0: CDRW drive at ata0 as master acd0: read 2751KB/s (2751KB/s) write 1720KB/s (1720KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-RW 120mm data disc ata1-master: pio=0x0c wdma=0x22 udma=0x45 cable=40pin ata1-master: setting PIO4 on SiS 5513 chip acpi_tz0: switched from _AC0 to NONE: 40.0C ata1-master: setting UDMA100 on SiS 5513 chip ad2: ATA-6 disk at ata1-master ad2: 114473MB (234441648 sectors), 232581 C, 16 H, 63 S, 512 B ad2: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad2 ad2: TIMEOUT - READ_DMA retrying (2 retries left) LBA=234441585 ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=d0 ostat1=d0 ad2: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ad2: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ad2: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ad2: stat=0x80 err=0x80 lsb=0x80 msb=0x80 ad2: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ad2: stat=0x90 err=0x90 lsb=0x90 msb=0x90 ad2: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=50 stat1=00 devices=0x1 ata1: resetting done .. ad2: pio=0x0c wdma=0x22 udma=0x45 cable=40pin ad2: setting PIO4 on SiS 5513 chip ad2: setting UDMA100 on SiS 5513 chip ata1: device config done .. ar: FreeBSD check1 failed [0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:58588992 [1] f:00 typ:15 s(CHS):1023/254/63 e(CHS):1023/254/63 s:58589055 l:144103050 [2] f:00 typ:165 s(CHS):1023/254/63 e(CHS):1023/254/63 s:212957640 l:21478905 [3] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:202692105 l:10265535 GEOM: Configure ad2s1, start 32256 length 29997563904 end 29997596159 GEOM: Configure ad2s2, start 29997596160 length 73780761600 end 103778357759 GEOM: Configure ad2s3, start 109034311680 length 10997199360 end 120031511039 GEOM: Configure ad2s4, start 103778357760 length 5255953920 end 109034311679 MBREXT Slice 5 on ad2s2: [0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:2008062 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:2008125 l:58492665 GEOM: Configure ad2s5, start 32256 length 1028127744 end 1028159999 MBREXT Slice 6 on ad2s2: [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:58492602 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:60500790 l:96390 GEOM: Configure ad2s6, start 1028192256 length 29948212224 end 30976404479 MBREXT Slice 7 on ad2s2: [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:96327 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:60597180 l:63874440 GEOM: Configure ad2s7, start 30976436736 length 49319424 end 31025756159 MBREXT Slice 8 on ad2s2: [0] f:00 typ:11 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:63874377 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:124471620 l:96390 GEOM: Configure ad2s8, start 31025788416 length 32703681024 end 63729469439 MBREXT Slice 9 on ad2s2: [0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:96327 [1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:124568010 l:19535040 GEOM: Configure ad2s9, start 63729501696 length 49319424 end 63778821119 MBREXT Slice 10 on ad2s2: [0] f:00 typ:165 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:19534977 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure ad2s10, start 63778853376 length 10001908224 end 73780761599 GEOM: Configure ad2s3a, start 0 length 134217728 end 134217727 GEOM: Configure ad2s3b, start 134217728 length 536870912 end 671088639 GEOM: Configure ad2s3c, start 0 length 10997199360 end 10997199359 GEOM: Configure ad2s3d, start 671088640 length 268435456 end 939524095 GEOM: Configure ad2s3e, start 939524096 length 268435456 end 1207959551 GEOM: Configure ad2s3f, start 1207959552 length 9789239808 end 10997199359 (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0 ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0 ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0 ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0 ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0 ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0 ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0 ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0 ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0 ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0 ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0 ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0 ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0 ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0 ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0 ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0 Mounting root from ufs:/dev/md0 start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /stand/sysinstall --Boundary-00=_S3aWB5bNQ54nbHk--