Date: Tue, 03 Jun 2008 01:10:11 +0200 From: Florian Smeets <flo@kasimir.com> To: John Baldwin <jhb@freebsd.org> Cc: current@freebsd.org Subject: Re: tx(4) MPSAFE patch Message-ID: <48447DD3.8030700@kasimir.com> In-Reply-To: <48447BF4.4000808@kasimir.com> References: <200805302339.33935.jhb@freebsd.org> <484461A5.1010003@kasimir.com> <200806021749.06765.jhb@freebsd.org> <48447BF4.4000808@kasimir.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Florian Smeets wrote: > John Baldwin wrote: >> On Monday 02 June 2008 05:09:57 pm Florian Smeets wrote: >>> John Baldwin wrote: >>>> I have a patch to make tx(4) MPSAFE. I do not have the hardware to >>>> test >> this >>>> however. Unlike many of the previous patches, though, this driver >>>> appears >> to >>>> be for hardware that is not entirely ancient, so there is hopefully a >> decent >>>> chance someone can test this. >>>> >>>> http://www.FreeBSD.org/~jhb/patches/tx.patch >>>> >>> Hi John, >>> >>> sorry does not work, do you need anything else than the backtrace? >>> FWIW, this is an SMP system with 2 CPUs. >> >> Ok, I've updated the patch to fix this (and to fix a few other minor >> nits with the driver). Please refetch the patch from the URL above >> and try again. Thanks. >> > > > > It goes on like that forever sometimes the zone varies between "16" "32" > and "64". The system does not boot further, or i was just to impatient... > In fact i was too impatient, it did boot. After the last witness warning these messages appear: tx0: Ethernet address: 00:e0:29:6c:2e:47 tx0: [ITHREAD] tx0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=8<VLAN_MTU> ether 00:e0:29:6c:2e:47 inet 172.30.1.100 netmask 0xffff0000 broadcast 172.30.255.255 media: Ethernet autoselect (100baseTX <full-duplex>) status: active And it does work flo@fw-pri:~ 1 > ping 172.30.1.100 PING 172.30.1.100 (172.30.1.100): 56 data bytes 64 bytes from 172.30.1.100: icmp_seq=0 ttl=64 time=1.780 ms 64 bytes from 172.30.1.100: icmp_seq=1 ttl=64 time=0.969 ms 64 bytes from 172.30.1.100: icmp_seq=2 ttl=64 time=0.974 ms Cheers, Florian
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?48447DD3.8030700>