Date: Fri, 27 Aug 1999 10:55:33 -0600 From: Oscar Bonilla <obonilla@fisicc-ufm.edu> To: freebsd-questions@freebsd.org Subject: vpo0 timeouts Message-ID: <19990827105533.A1635@fisicc-ufm.edu>
next in thread | raw e-mail | index | archive | help
I'm trying to set up the iomega parallel zip drive on my
laptop. I compiled a kernel with scbus0, da0 and vpo0 as
suggested in LINT.
at boot time I'm getting vpo0: timeout errors...
how should I begin to troubleshoot this?
here's my dmesg:
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #20: Fri Aug 27 00:36:44 CST 1999
root@voyager.fisicc-ufm.edu:/usr/src/sys/compile/VAIO
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (quarter-micron) (265.28-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x581 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67043328 (65472K bytes)
avail memory = 62021632 (60568K bytes)
Preloaded elf kernel "kernel" at 0xc02e5000.
Intel Pentium detected, installing workaround for F00F bug
VESA: v2.0, 1984k memory, flags:0x0, mode table:0xc0294c62 (1000022)
VESA: MagicGraph 128XD 40K SVGA BIOS
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> at device 7.1 on pci0
chip1: <UHCI USB controller> irq 9 at device 7.2 on pci0
chip2: <Intel 82371AB Power management controller> at device 7.3 on pci0
vga-pci0: <NeoMagic NM2160 laptop SVGA controller> irq 9 at device 8.0 on pci0
pci0: unknown card DBM8009 (vendor=0x104d, dev=0x8009) at 9.0 irq 9
pcic0: <Ricoh RL5C475 PCI-CardBus Brige> at device 10.0 on pci0
Probing for PnP devices:
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
wdc0 at port 0x1f0-0x1f7 irq 14 flags 0xa0ffa0ff on isa0
wdc0: unit 0 (wd0): <TOSHIBA MK4309MAT>, DMA, 32-bit, multi-block-16
wd0: 4126MB (8452080 sectors), 8944 cyls, 15 heads, 63 S/T, 512 B/S
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model VersaPad, device ID 0
vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0 at port 0x378-0x37f irq 7 flags 0x4 on isa0
ppc0: Generic chipset (EPP-only) in EPP mode (EPP 1.9)
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
imm0: <Iomega Matchmaker Parallel to SCSI interface> on ppbus 0
imm0: EPP 1.9 mode
pcm0 at port 0x220 irq 5 drq 1 flags 0x15 on isa0
ESS1868 (rev 11)
PC-Card Intel 82365 (5 mem & 2 I/O windows)
pcic: controller irq 9
Initializing PC-card drivers: ep
Card inserted, slot 0
vpo0: VP0 error/timeout (5)
vpo0: VP0 error/timeout (2)
vpo0: VP0 error/timeout (2)
vpo0: VP0 error/timeout (2)
vpo0: VP0 error/timeout (2)
vpo0: VP0 error/timeout (2)
vpo0: VP0 error/timeout (2)
vpo0: VP0 error/timeout (2)
vpo0: VP0 error/timeout (2)
vpo0: VP0 error/timeout (2)
changing root device to wd0s1a
ep0: utp/bnc[*UTP*] address 00:10:4b:ed:09:f7
thanks,
-Oscar
--
For PGP Public Key: finger obonilla@fisicc-ufm.edu
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990827105533.A1635>