Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 29 Apr 2002 11:46:49 -0500
From:      Larry Rosenman <ler@airmail.net>
To:        freebsd-stable@freebsd.org
Cc:        freebsd-mobile@freebsd.org
Subject:   Re: New Laptop: i810: HELP
Message-ID:  <20020429164649.GA176@lerlaptop.iadfw.net>
In-Reply-To: <20020429144310.GA10697@lerlaptop.iadfw.net>
References:  <20020429144310.GA10697@lerlaptop.iadfw.net>

next in thread | previous in thread | raw e-mail | index | archive | help
* Larry Rosenman <ler@lerctr.org> [020429 09:43]:
> I bought myself a new laptop yesterday, and am having issues 
> getting XFree86 4.2.0 to initialize.  The issue appears to be
> the /dev/agpgart device says it's not configured, although the
> Laptop has the I830M chips, and I loaded agp.ko in /boot/loader.conf 

It's a Fujitsu C6651 LapTop, if anyone cares, 256MB mem, P-IIIM at 1.13Ghz
20GB HDD, and 4 USB ports (which, apparently we need to update the driver 
for, but that's a different thread, after we get X running). 

The XFree86 is 4.2.0, installed via the PACKAGES. 

Following up to myself...

Made SOME progress...
We still die, but it's closer. 

Any of y'all have any ideas? 


with this patch in /usr/src/sys/pci/agp_i810.c:

--- agp_i810.c.orig	Thu Oct 19 05:36:27 2000
+++ agp_i810.c	Mon Apr 29 11:28:02 2002
@@ -87,6 +87,9 @@
 
 	case 0x11328086:
 		return ("Intel 82815 (i815 GMCH) SVGA controller");
+
+	case 0x35778086:
+		return ("Intel 82830M (i830M GMCH) SVGA controller");
 	};
 
 	return NULL;
@@ -116,6 +119,10 @@
 	case 0x11328086:
 		devid = 0x11308086;
 		break;
+
+	case 0x35778086:
+		devid = 0x35758086;
+		break;
 	};
 	if (device_get_children(device_get_parent(dev), &children, &nchildren))
 		return 0;
@@ -150,12 +157,14 @@
 		}
 
 		smram = pci_read_config(bdev, AGP_I810_SMRAM, 1);
+#if 0
 		if ((smram & AGP_I810_SMRAM_GMS)
 		    == AGP_I810_SMRAM_GMS_DISABLED) {
 			if (bootverbose)
 				printf("I810: disabled, not probing\n");
 			return ENXIO;
 		}
+#endif
 
 		device_verbose(dev);
 		device_set_desc(dev, desc);


I get the following XFree86 log:


XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: FreeBSD 4.5 i386 [ELF] 
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Apr 29 11:38:43 2002
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "Intel 810-1"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/").
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.1
	XFree86 Video Driver: 0.5
	XFree86 XInput driver : 0.3
	XFree86 Server Extension : 0.1
	XFree86 Font Renderer : 0.3
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3575 card 10cf,113b rev 04 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 8086,3577 card 10cf,113c rev 04 class 03,00,00 hdr 80
(II) PCI: 00:02:1: chip 8086,3577 card 10cf,113c rev 00 class 03,80,00 hdr 80
(II) PCI: 00:1d:0: chip 8086,2482 card 10cf,113d rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2484 card 10cf,113d rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,248a card 10cf,113d rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,2483 card 10cf,113d rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2485 card 10cf,112f rev 02 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,2486 card 10cf,10d1 rev 02 class 07,03,00 hdr 00
(II) PCI: 01:0a:0: chip 104c,ac55 card 0000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 01:0a:1: chip 104c,ac55 card 0000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 01:0d:0: chip 10ec,8139 card 10cf,111c rev 10 class 02,00,00 hdr 00
(II) PCI: 01:0e:0: chip 10cf,2010 card 10cf,112b rev 01 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:30:0), (0,1,3), BCTRL: 0x04 (VGA_EN is cleared)
(II) Bus 1 I/O range:
	[0] -1	0x00002000 - 0x000020ff (0x100) IX[B]
	[1] -1	0x00002400 - 0x000024ff (0x100) IX[B]
	[2] -1	0x00002800 - 0x000028ff (0x100) IX[B]
	[3] -1	0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0xe0200000 - 0xe02fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(0:2:0) Intel i830M rev 4, Mem @ 0xe8000000/27, 0xe0000000/19
(--) PCI: (0:2:1) Intel i830M rev 0, Mem @ 0xf0000000/27, 0xe0080000/19
(II) Addressable bus resource ranges are
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0xe0200000 - 0xe03fffff (0x200000) MX[B]E
	[1] -1	0xe0200800 - 0xe0200fff (0x800) MX[B]E
	[2] -1	0xe0100000 - 0xe01fffff (0x100000) MX[B]E
	[3] -1	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
	[4] -1	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[5] -1	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
	[6] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[7] -1	0x00002000 - 0x000020ff (0x100) IX[B]E
	[8] -1	0x00001800 - 0x000018ff (0x100) IX[B]E
	[9] -1	0x00001400 - 0x000014ff (0x100) IX[B]E
	[10] -1	0x00001880 - 0x000018ff (0x80) IX[B]E
	[11] -1	0x00001000 - 0x000010ff (0x100) IX[B]E
	[12] -1	0x00001c00 - 0x00001cff (0x100) IX[B]E
	[13] -1	0x00001c20 - 0x00001c3f (0x20) IX[B]E
	[14] -1	0x00000374 - 0x00000377 (0x4) IX[B]E
	[15] -1	0x00000170 - 0x0000017f (0x10) IX[B]E
	[16] -1	0x000003f4 - 0x000003f7 (0x4) IX[B]E
	[17] -1	0x000001f0 - 0x000001ff (0x10) IX[B]E
	[18] -1	0x000018e0 - 0x000018ff (0x20) IX[B]E
	[19] -1	0x000018c0 - 0x000018ff (0x40) IX[B]E
(II) PCI Memory resource overlap reduced 0xe0200000 from 0xe03fffff to 0xe02007ff
(II) PCI I/O resource overlap reduced 0x00001800 from 0x000018ff to 0x0000187f
(II) PCI I/O resource overlap reduced 0x00001880 from 0x000018ff to 0x000018bf
(II) PCI I/O resource overlap reduced 0x00001c00 from 0x00001cff to 0x00001c1f
(II) PCI I/O resource overlap reduced 0x000018c0 from 0x000018ff to 0x000018df
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0xe0200000 - 0xe02007ff (0x800) MX[B]E
	[1] -1	0xe0200800 - 0xe0200fff (0x800) MX[B]E
	[2] -1	0xe0100000 - 0xe01fffff (0x100000) MX[B]E
	[3] -1	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
	[4] -1	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[5] -1	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
	[6] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[7] -1	0x00002000 - 0x000020ff (0x100) IX[B]E
	[8] -1	0x00001800 - 0x0000187f (0x80) IX[B]E
	[9] -1	0x00001400 - 0x000014ff (0x100) IX[B]E
	[10] -1	0x00001880 - 0x000018bf (0x40) IX[B]E
	[11] -1	0x00001000 - 0x000010ff (0x100) IX[B]E
	[12] -1	0x00001c00 - 0x00001c1f (0x20) IX[B]E
	[13] -1	0x00001c20 - 0x00001c3f (0x20) IX[B]E
	[14] -1	0x00000374 - 0x00000377 (0x4) IX[B]E
	[15] -1	0x00000170 - 0x0000017f (0x10) IX[B]E
	[16] -1	0x000003f4 - 0x000003f7 (0x4) IX[B]E
	[17] -1	0x000001f0 - 0x000001ff (0x10) IX[B]E
	[18] -1	0x000018e0 - 0x000018ff (0x20) IX[B]E
	[19] -1	0x000018c0 - 0x000018df (0x20) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xe0200000 - 0xe02007ff (0x800) MX[B]E
	[6] -1	0xe0200800 - 0xe0200fff (0x800) MX[B]E
	[7] -1	0xe0100000 - 0xe01fffff (0x100000) MX[B]E
	[8] -1	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
	[9] -1	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[10] -1	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
	[11] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[12] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0x00002000 - 0x000020ff (0x100) IX[B]E
	[15] -1	0x00001800 - 0x0000187f (0x80) IX[B]E
	[16] -1	0x00001400 - 0x000014ff (0x100) IX[B]E
	[17] -1	0x00001880 - 0x000018bf (0x40) IX[B]E
	[18] -1	0x00001000 - 0x000010ff (0x100) IX[B]E
	[19] -1	0x00001c00 - 0x00001c1f (0x20) IX[B]E
	[20] -1	0x00001c20 - 0x00001c3f (0x20) IX[B]E
	[21] -1	0x00000374 - 0x00000377 (0x4) IX[B]E
	[22] -1	0x00000170 - 0x0000017f (0x10) IX[B]E
	[23] -1	0x000003f4 - 0x000003f7 (0x4) IX[B]E
	[24] -1	0x000001f0 - 0x000001ff (0x10) IX[B]E
	[25] -1	0x000018e0 - 0x000018ff (0x20) IX[B]E
	[26] -1	0x000018c0 - 0x000018df (0x20) IX[B]E
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.1.10
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.1.0
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.3
(II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815,
	i830M
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset i830M found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xe0200000 - 0xe02007ff (0x800) MX[B]E
	[6] -1	0xe0200800 - 0xe0200fff (0x800) MX[B]E
	[7] -1	0xe0100000 - 0xe01fffff (0x100000) MX[B]E
	[8] -1	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
	[9] -1	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[10] -1	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
	[11] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[12] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0x00002000 - 0x000020ff (0x100) IX[B]E
	[15] -1	0x00001800 - 0x0000187f (0x80) IX[B]E
	[16] -1	0x00001400 - 0x000014ff (0x100) IX[B]E
	[17] -1	0x00001880 - 0x000018bf (0x40) IX[B]E
	[18] -1	0x00001000 - 0x000010ff (0x100) IX[B]E
	[19] -1	0x00001c00 - 0x00001c1f (0x20) IX[B]E
	[20] -1	0x00001c20 - 0x00001c3f (0x20) IX[B]E
	[21] -1	0x00000374 - 0x00000377 (0x4) IX[B]E
	[22] -1	0x00000170 - 0x0000017f (0x10) IX[B]E
	[23] -1	0x000003f4 - 0x000003f7 (0x4) IX[B]E
	[24] -1	0x000001f0 - 0x000001ff (0x10) IX[B]E
	[25] -1	0x000018e0 - 0x000018ff (0x20) IX[B]E
	[26] -1	0x000018c0 - 0x000018df (0x20) IX[B]E
(II) resource ranges after probing:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xe0200000 - 0xe02007ff (0x800) MX[B]E
	[6] -1	0xe0200800 - 0xe0200fff (0x800) MX[B]E
	[7] -1	0xe0100000 - 0xe01fffff (0x100000) MX[B]E
	[8] -1	0xe0080000 - 0xe00fffff (0x80000) MX[B](B)
	[9] -1	0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B)
	[10] -1	0xe0000000 - 0xe007ffff (0x80000) MX[B](B)
	[11] -1	0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
	[12] 0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[13] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[14] 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[15] -1	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0x00002000 - 0x000020ff (0x100) IX[B]E
	[18] -1	0x00001800 - 0x0000187f (0x80) IX[B]E
	[19] -1	0x00001400 - 0x000014ff (0x100) IX[B]E
	[20] -1	0x00001880 - 0x000018bf (0x40) IX[B]E
	[21] -1	0x00001000 - 0x000010ff (0x100) IX[B]E
	[22] -1	0x00001c00 - 0x00001c1f (0x20) IX[B]E
	[23] -1	0x00001c20 - 0x00001c3f (0x20) IX[B]E
	[24] -1	0x00000374 - 0x00000377 (0x4) IX[B]E
	[25] -1	0x00000170 - 0x0000017f (0x10) IX[B]E
	[26] -1	0x000003f4 - 0x000003f7 (0x4) IX[B]E
	[27] -1	0x000001f0 - 0x000001ff (0x10) IX[B]E
	[28] -1	0x000018e0 - 0x000018ff (0x20) IX[B]E
	[29] -1	0x000018c0 - 0x000018df (0x20) IX[B]E
	[30] 0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[31] 0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.2.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.5
(**) I810(0): Depth 24, (--) framebuffer bpp 32
(==) I810(0): RGB weight 888
(==) I810(0): Default visual is TrueColor
(==) I810(0): Write-combining range (0xa0000,0x20000) was already clear
(==) I810(0): Write-combining range (0xf0000,0x10000)
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(--) I810(0): Chipset: "i830"
(--) I810(0): Linear framebuffer at 0xE8000000
(--) I810(0): IO registers at addr 0xE0000000
(II) I810(0): detected 8192K stolen memory.
(II) I810(0): I810CheckAvailableMemory: 208896k available
(==) I810(0): Will alloc AGP framebuffer: 8192 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
c000:01a2: 62 ILLEGAL X86 OPCODE!
(II) I810(0): Failed to detect active display devices
(EE) I810(0): Couldn't detect display devices.
(II) UnloadModule: "i810"
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R6/lib/modules/libint10.a
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.


Here is a verbose dmesg:

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #14: Mon Apr 29 11:31:10 CDT 2002
    ler@lerlaptop:/usr/obj/usr/src/sys/LERLAPTOP
Calibrating clock(s) ... TSC clock: 1129562703 Hz, i8254 clock: 1193174 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (1129.58-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 259522560 (253440K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003be000 - 0x0f6dffff, 254943232 bytes (62242 pages)
0x0f700000 - 0x0f777fff, 491520 bytes (120 pages)
avail memory = 248741888 (242912K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f63d0
bios32: Entry = 0xfd850 (c00fd850)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0x11e
pnpbios: Found PnP BIOS data at 0xc00f6420
pnpbios: Entry = f0000:92bd  Rev = 1.0
Other BIOS signatures found:
ACPI: 000f6400
Preloaded elf kernel "kernel" at 0xc0397000.
Preloaded elf module "agp.ko" at 0xc03970a8.
Preloaded elf module "accf_data.ko" at 0xc0397144.
Preloaded elf module "accf_http.ko" at 0xc03971e8.
Pentium Pro MTRR support enabled
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=35758086)
Using $PIR table, 9 entries at 0xc00fdf30
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found->	vendor=0x8086, dev=0x3575, revid=0x04
	class=06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base 00000000, size  0
found->	vendor=0x8086, dev=0x3577, revid=0x04
	class=03-00-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base e8000000, size 27
	map[14]: type 1, range 32, base e0000000, size 19
found->	vendor=0x8086, dev=0x3577, revid=0x00
	class=03-80-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base f0000000, size 27
	map[14]: type 1, range 32, base e0080000, size 19
found->	vendor=0x8086, dev=0x2482, revid=0x02
	class=0c-03-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[20]: type 1, range 32, base 000018c0, size  5
found->	vendor=0x8086, dev=0x2484, revid=0x02
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[20]: type 1, range 32, base 000018e0, size  5
found->	vendor=0x8086, dev=0x2448, revid=0x42
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=3 	secondarybus=1
found->	vendor=0x8086, dev=0x248c, revid=0x02
	class=06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x248a, revid=0x02
	class=01-01-8a, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=255
	map[10]: type 1, range 32, base 000001f0, size  3
	map[14]: type 1, range 32, base 000003f4, size  2
	map[18]: type 1, range 32, base 00000170, size  3
	map[1c]: type 1, range 32, base 00000374, size  2
	map[20]: type 1, range 32, base 00001c20, size  4
	map[24]: type 1, range 32, base e0100000, size 10
found->	vendor=0x8086, dev=0x2483, revid=0x02
	class=0c-05-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[20]: type 1, range 32, base 00001c00, size  5
found->	vendor=0x8086, dev=0x2485, revid=0x02
	class=04-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[10]: type 1, range 32, base 00001000, size  8
	map[14]: type 1, range 32, base 00001880, size  6
found->	vendor=0x8086, dev=0x2486, revid=0x02
	class=07-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=b, irq=11
	map[10]: type 1, range 32, base 00001400, size  8
	map[14]: type 1, range 32, base 00001800, size  7
pci0: <PCI bus> on pcib0
agp0: <Intel 82830M (i830M GMCH) SVGA controller> mem 0xe0000000-0xe007ffff,0xe8000000-0xefffffff irq 11 at device 2.0 on pci0
agp0: allocating GATT for aperture of size 32M
pci0: <unknown card> (vendor=0x8086, dev=0x3577) at 2.1
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x18c0-0x18df irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x18e0-0x18ff irq 11 at device 29.1 on pci0
	using shared irq11.
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib1: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
found->	vendor=0x104c, dev=0xac55, revid=0x01
	class=06-07-00, hdrtype=0x02, mfdev=1
	subordinatebus=2 	secondarybus=2
	intpin=a, irq=11
found->	vendor=0x104c, dev=0xac55, revid=0x01
	class=06-07-00, hdrtype=0x02, mfdev=1
	subordinatebus=3 	secondarybus=3
	intpin=b, irq=11
found->	vendor=0x10ec, dev=0x8139, revid=0x10
	class=02-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base 00002000, size  8
	map[14]: type 1, range 32, base e0200800, size  8
found->	vendor=0x10cf, dev=0x2010, revid=0x01
	class=0c-00-10, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=11
	map[10]: type 1, range 32, base e0200000, size 11
pci1: <PCI bus> on pcib1
Found unknown YENTA PCI-CARDBUS Bridge devid 0xac55104c
pcic0: <YENTA PCI-CARDBUS Bridge> irq 11 at device 10.0 on pci1
pcic0: PCI Memory allocated: 0x44000000
pcic0: PCI Configuration space:
  0x00: 0xac55104c 0x02100007 0x06070001 0x00824008 
  0x10: 0x44000000 0x020000a0 0x00020201 0x00000000 
  0x20: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x30: 0x00000000 0x00000000 0x00000000 0x07e0010b 
  0x40: 0x116410cf 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00649060 0x00000000 0x00000000 0x01c61d22 
  0x90: 0x404682c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe120001 0x00c00000 0x00000004 0x0000000b 
  0xb0: 0x09000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pccard0: <PC Card bus (classic)> on pcic0
Found unknown YENTA PCI-CARDBUS Bridge devid 0xac55104c
pcic1: <YENTA PCI-CARDBUS Bridge> irq 11 at device 10.1 on pci1
pcic1: PCI Memory allocated: 0x44001000
pcic1: PCI Configuration space:
  0x00: 0xac55104c 0x02100007 0x06070001 0x00824008 
  0x10: 0x44001000 0x020000a0 0x00030301 0x00000000 
  0x20: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x30: 0x00000000 0x00000000 0x00000000 0x07e0020b 
  0x40: 0x116410cf 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00649060 0x00000000 0x00000000 0x01c61d22 
  0x90: 0x404683c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe120001 0x00c00000 0x00000804 0x0000000b 
  0xb0: 0x09000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pccard1: <PC Card bus (classic)> on pcic1
rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem 0xe0200800-0xe02008ff irq 11 at device 13.0 on pci1
rl0: Ethernet address: 00:e0:00:7e:d0:45
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: rl0 attached
pci1: <unknown card> (vendor=0x10cf, dev=0x2010) at 14.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1c20-0x1c2f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe0100000-0xe01003ff at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1c20
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1c28
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=00 stat1=00
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <SMBus controller> port 0x1c00-0x1c1f irq 11 at device 31.3 on pci0
pcm0: <Intel 82801CA (ICH3)> port 0x1880-0x18bf,0x1000-0x10ff irq 11 at device 31.5 on pci0
pcm0: ac97 codec id 0x83847656 (SigmaTel STAC9756/9757)
pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: ac97 primary codec extended features variable rate PCM, reserved 1, AMAP
pcm0: sndbuf_setmap 29000, 4000; 0xd3bda000 -> 29000
pcm0: sndbuf_setmap 2d000, 4000; 0xd3bde000 -> 2d000
pcm0: measured ac97 link rate at 48014 Hz, will use 48000 Hz
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6 irq 11
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
pcic-: pcic0 exists, using next available unit number
pcic-: pcic1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 17 devices, largest 266 bytes
PNP0c02: adding io range 0x10-0x18, size=0x9, align=0x1
PNP0c02: adding io range 0x1f-0x1f, size=0x1, align=0x1
PNP0c02: adding io range 0x22-0x22, size=0x1, align=0x1
PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1
PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1
PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1
PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1
PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1
PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1
PNP0c02: adding io range 0x4e-0x4f, size=0x2, align=0x1
PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1
PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1
PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1
PNP0c02: adding io range 0x72-0x77, size=0x6, align=0x1
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x90-0x9f, size=0x10, align=0x1
PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1
PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1
PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1
PNP0c02: adding io range 0xb0-0xbd, size=0xe, align=0x1
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0xf800-0xf87f, size=0x80, align=0x1
PNP0c02: adding io range 0xf880-0xf8ff, size=0x80, align=0x1
PNP0c02: adding io range 0xfc00-0xfc7f, size=0x80, align=0x1
PNP0c02: adding io range 0xfc80-0xfcbf, size=0x40, align=0x1
PNP0c02: adding io range 0xfd00-0xfd6f, size=0x70, align=0x1
PNP0c02: adding io range 0xfe00-0xfe0f, size=0x10, align=0x1
PNP0c02: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c02: adding fixed memory32 range 0xffb00000-0xffbfffff, size=0x100000
PNP0c02: end config
pnpbios: handle 0 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe4000-0xfffff, size=0x1c000
PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000
PNP0c01: end config
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
PNP0c04: end config
pnpbios: handle 3 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 4 device ID PNP0800 (0008d041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 00x2
PNP0303: end config
pnpbios: handle 5 device ID PNP0303 (0303d041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
PNP0200: end config
pnpbios: handle 7 device ID PNP0200 (0002d041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 00x4
PNP0000: end config
pnpbios: handle 8 device ID PNP0000 (0000d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 00x1
PNP0100: end config
pnpbios: handle 9 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
PNP0b00: end config
pnpbios: handle 10 device ID PNP0b00 (000bd041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0a03: end config
pnpbios: handle 11 device ID PNP0a03 (030ad041)
PNP0c02: adding fixed memory32 range 0xcf000-0xcffff, size=0x1000
PNP0c02: end config
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0f13: adding irq mask 0000
PNP0f13: end config
pnpbios: handle 13 device ID PNP0f13 (130fd041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 14 device ID PNP0700 (0007d041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 15 device ID PNP0501 (0105d041)
SMCf010: adding io range 0x2e8-0x2ef, size=0x8, align=0x1
SMCf010: adding io range 0x400-0x43f, size=0x40, align=0x80
SMCf010: adding irq mask 00x8
SMCf010: adding dma mask 0x8
SMCf010: end config
pnpbios: handle 17 device ID SMCf010 (10f0a34d)
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0x1
PNP0400: adding io range 0x778-0x77b, size=0x4, align=0x1
PNP0400: adding irq mask 0x80
PNP0400: end config
pnpbios: handle 19 device ID PNP0400 (0004d041)
PNP0e03: adding io range 0-0xffffffff, size=0, align=0
PNP0e03: end config
pnpbios: handle 21 device ID PNP0e03 (030ed041)
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xcefff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81 
bf 1f 00 4f 0d 0e 00 00 06 40 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81 
bf 1f 00 4f 0d 0e 00 00 06 40 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic2 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic3 failed to probe at port 0x3e2 iomem 0xd4000 on isa0
sio0: irq maps: 0x841 0x851 0x841 0x841
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
vpo0: can't connect to the drive
imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
isa_probe_children: probing PnP devices
unknown: <PNP0c02> failed to probe at port 0x10-0x18,0x1f,0x22,0x24-0x25,0x28-0x29,0x2c-0x2d,0x30-0x31,0x34-0x35,0x38-0x39,0x3c-0x3d,0x4e-0x4f,0x50-0x52,0x62,0x66,0x72-0x77,0x80,0x90-0x9f,0xa4-0xa5,0xa8-0xa9,0xac-0xad,0xb0-0xbd,0x4d0-0x4d1,0xf800-0xf87f,0xf880-0xf8ff,0xfc00-0xfc7f,0xfc80-0xfcbf,0xfd00-0xfd6f,0xfe00-0xfe0f iomem 0xfff00000-0xffffffff,0xffb00000-0xffbfffff on isa0
unknown: <PNP0c01> failed to probe at iomem 0-0x9ffff,0xe4000-0xfffff,0x100000-0xfffffff on isa0
unknown: <PNP0c04> failed to probe at port 0xf0-0xff irq 13 on isa0
pca0: <AT-style speaker sound> at port 0x61 on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0200> failed to probe at port 0-0xf,0x81-0x8f,0xc0-0xdf drq 4 on isa0
unknown: <PNP0000> can't assign resources
unknown: <PNP0000> at port 0x20-0x21,0xa0-0xa1 irq 2 on isa0
unknown: <PNP0100> failed to probe at port 0x40-0x43 irq 0 on isa0
unknown: <PNP0b00> failed to probe at port 0x70-0x71 irq 8 on isa0
unknown: <PNP0a03> failed to probe at port 0xcf8-0xcff on isa0
unknown: <PNP0c02> failed to probe at iomem 0xcf000-0xcffff on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <SMCf010> failed to probe at port 0x2e8-0x2ef,0x400-0x43f irq 3 drq 3 on isa0
unknown: <PNP0400> can't assign resources
unknown: <PNP0400> at port 0x378-0x37f on isa0
unknown: <PNP0e03> failed to probe at port 0x19 on isa0
pcic1: Event mask 0xf
BIOS Geometries:
 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
ata1-slave: ATAPI identify retries exceeded
pcic1: Autodetected 5.0V card
pccard: card inserted, slot 1
pcic1: reset 1 int is 10 stat is 6f
pccard: card removed, slot 1
ad0: success setting UDMA5 on Intel chip
Creating DISK ad0
pcic1: reset 1 int is 10 stat is 6f
pcic1: Autodetected 5.0V card
pccard: card inserted, slot 1
pcic1: reset 2 int is 70 stat is 4f
pcic1: reset 3 int is 70 stat is 4f
ar: FreeBSD check1 failed
ad0: <TOSHIBA MK2018GAP/M1.42 A> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <HITACHI DVD-ROM GD-S250/0012> DVD-ROM drive at ata1 as master
acd0: read 1722KB/s (34515KB/s), 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, DVD-RAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0x5, start 36001665, end = 39070079, size 3068415 : OK
ad0s2: type 0xa5, start 63, end = 36001664, size 36001602 : OK
ad0s5: type 0xb, start 36001728, end = 39070079, size 3068352 
ad0s5: C/H/S start 1023/1/1 (16434558) != start 36001728: invalid
start_init: trying /sbin/init
pcic1: reset 0 
Linux ELF exec handler installed
pccard1: Assigning wi0: io 0x240-0x27f irq 11 mem 0x0-0xffffffff
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 11
pcic: I/O win 0 flags 5 240-27f
wi0 at port 0x240-0x27f irq 11 flags 0x10000 slot 1 on pccard1
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 11
wi0: 802.11 address: 00:06:25:01:da:49
wi0: using RF:PRISM2.5 MAC:ISL3873
wi0: Intersil Firmware: Primary 1.00.04, Station 1.00.03
wi0: wi_has_wep = 1
bpf: wi0 attached
pcic1: Event mask 0x9

Kernel Config:

#
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.38 2002/01/25 17:41:40 murray Exp $

machine		i386
cpu		I686_CPU
ident		LERLAPTOP
maxusers	0

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_DIRHASH		#Improve performance on big directories
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=5000	#Delay (in ms) before probing SCSI
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options		ICMP_BANDLIM		#Rate limit bad replies
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options		PNPBIOS
options		PERFMON
# CPU_ENABLE_SSE enables SSE/MMX2 instructions support.
options 	CPU_ENABLE_SSE


device		isa
device		pci

# Floppy drives
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0
#

# ATA and ATAPI devices
device		ata0	at isa? port IO_WD1 irq 14
device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
device		atapifd			# ATAPI floppy drives
device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering

# SCSI peripherals
device		scbus		# SCSI bus (required)
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)


# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1 flags 0x1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100


# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
########################################vvvv was 0x20
device		apm0    at nexus? flags 0x00 # Advanced Power Management

# PCCARD (PCMCIA) support
device		card
device		pcic0	at isa? irq 0 port 0x3e0 iomem 0xd0000
device		pcic1	at isa? irq 0 port 0x3e2 iomem 0xd4000 

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
device		vpo		# Requires scbus and da


# PCI Ethernet NICs.
device		miibus		# MII bus support
device		rl		# RealTek 8129/8139

# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device		wi

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
#pseudo-device	sl	1	# Kernel SLIP
#pseudo-device	ppp	1	# Kernel PPP
pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
#pseudo-device	gif		# IPv6 and IPv4 tunneling
#pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		usb		# USB Bus (required)
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		uscanner	# Scanners
device		urio		# Diamond Rio MP3 Player
# USB Ethernet, requires mii
device		aue		# ADMtek USB ethernet
device		cue		# CATC USB ethernet
device		kue		# Kawasaki LSI USB ethernet
#####LER
device		pcm		# sound?
device		smbus
device		iicbus
device		iicbb
device		intpm
device		ichsmb
device		smb
device		iic
device		ic
device		pca
pseudo-device	speaker

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020429164649.GA176>