From owner-p4-projects Mon Aug 19 4:18:29 2002 Delivered-To: p4-projects@freebsd.org Received: by hub.freebsd.org (Postfix, from userid 32767) id 3266E37B401; Mon, 19 Aug 2002 04:17:25 -0700 (PDT) Delivered-To: perforce@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id BC3E037B400 for ; Mon, 19 Aug 2002 04:17:24 -0700 (PDT) Received: from freefall.freebsd.org (freefall.FreeBSD.org [216.136.204.21]) by mx1.FreeBSD.org (Postfix) with ESMTP id 9322A43E65 for ; Mon, 19 Aug 2002 04:17:23 -0700 (PDT) (envelope-from chris@freebsd.org) Received: from freefall.freebsd.org (perforce@localhost [127.0.0.1]) by freefall.freebsd.org (8.12.4/8.12.4) with ESMTP id g7JBHNJU088072 for ; Mon, 19 Aug 2002 04:17:23 -0700 (PDT) (envelope-from chris@freebsd.org) Received: (from perforce@localhost) by freefall.freebsd.org (8.12.4/8.12.4/Submit) id g7JBHMRB088058 for perforce@freebsd.org; Mon, 19 Aug 2002 04:17:22 -0700 (PDT) Date: Mon, 19 Aug 2002 04:17:22 -0700 (PDT) Message-Id: <200208191117.g7JBHMRB088058@freefall.freebsd.org> X-Authentication-Warning: freefall.freebsd.org: perforce set sender to chris@freebsd.org using -f From: Chris Costello Subject: PERFORCE change 16258 for review To: Perforce Change Reviews Sender: owner-p4-projects@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG http://people.freebsd.org/~peter/p4db/chv.cgi?CH=16258 Change 16258 by chris@chris_holly on 2002/08/19 04:16:39 Integ. Affected files ... .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/articles/contributors/article.sgml#6 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/articles/hats/article.sgml#2 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/developers-handbook/Makefile#6 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/developers-handbook/book.sgml#5 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/developers-handbook/chapters.ent#4 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/fdp-primer/psgml-mode/chapter.sgml#2 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/fdp-primer/sgml-markup/chapter.sgml#3 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/fdp-primer/tools/chapter.sgml#3 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/fdp-primer/writing-style/chapter.sgml#2 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml#5 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/basics/chapter.sgml#4 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/config/chapter.sgml#4 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/cutting-edge/chapter.sgml#6 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/kernelconfig/chapter.sgml#4 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/linuxemu/chapter.sgml#4 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/multimedia/chapter.sgml#2 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/ports/chapter.sgml#4 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/ppp-and-slip/chapter.sgml#5 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/printing/chapter.sgml#2 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/security/chapter.sgml#6 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/vinum/chapter.sgml#2 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/x11/chapter.sgml#4 integrate .. //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/porters-handbook/book.sgml#6 integrate .. //depot/projects/trustedbsd/doc/fr_FR.ISO8859-1/books/handbook/kernelconfig/Makefile#1 branch .. //depot/projects/trustedbsd/doc/fr_FR.ISO8859-1/books/handbook/kernelconfig/chapter.sgml#3 integrate .. //depot/projects/trustedbsd/doc/fr_FR.ISO8859-1/books/handbook/l10n/chapter.sgml#3 integrate .. //depot/projects/trustedbsd/doc/fr_FR.ISO8859-1/books/handbook/multimedia/chapter.sgml#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/apropos.1#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/biff.1#3 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/chmod.1#3 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/cp.1#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/dig.1#4 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/login.1#3 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/paste.1#3 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/pax.1#3 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/rcp.1#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/scp.1#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/send-pr.1#3 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/sftp.1#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/ssh-add.1#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/ssh-agent.1#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/ssh-keygen.1#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/ssh-keyscan.1#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/ssh.1#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/tcsh.1#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man1/top.1#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man5/Makefile#3 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man5/ssh_config.5#1 branch .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man5/sshd_config.5#1 branch .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man5/termcap.5#3 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man8/Makefile#4 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man8/comsat.8#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man8/ftpd.8#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man8/inetd.8#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man8/nsupdate.8#3 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man8/revnetgroup.8#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man8/sftp-server.8#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man8/ssh-keysign.8#1 branch .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man8/sshd.8#2 integrate .. //depot/projects/trustedbsd/doc/ja_JP.eucJP/man/man8/sync.8#2 integrate Differences ... ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/articles/contributors/article.sgml#6 (text+ko) ==== @@ -18,7 +18,7 @@ Contributors to FreeBSD - $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/article.sgml,v 1.236 2002/08/15 20:01:12 seanc Exp $ + $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/article.sgml,v 1.237 2002/08/18 16:39:09 marcus Exp $ This article lists individuals and organizations who have @@ -5114,6 +5114,10 @@ + Maxime Romano verbophobe@hotmail.com + + + Micha Class michael_class@hpbbse.bbn.hp.com ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/articles/hats/article.sgml#2 (text+ko) ==== @@ -27,7 +27,7 @@ - $FreeBSD: doc/en_US.ISO8859-1/articles/hats/article.sgml,v 1.1 2002/06/25 16:58:12 mwlucas Exp $ + $FreeBSD: doc/en_US.ISO8859-1/articles/hats/article.sgml,v 1.3 2002/08/17 20:01:18 ceri Exp $ 2002 @@ -112,7 +112,7 @@ If a committer feels that a hat is abusing his or her power, or being regularly rude to contributors, then they should bring the matter to core. This problem can be technical, social, - process, or some combination or subset of these. Core will hear + procedural, or some combination or subset of these. Core will hear the case and reach a decision, and expects both sides to abide by their decision. Core appreciates specific complaints rather than general ones as those are easier to resolve. @@ -125,4 +125,4 @@ secretly solve vulnerabilities before they are announced.) The hat should be a first among equals, not a chairman. -+ ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/developers-handbook/Makefile#6 (text+ko) ==== @@ -1,5 +1,5 @@ # -# $FreeBSD: doc/en_US.ISO8859-1/books/developers-handbook/Makefile,v 1.14 2002/07/29 06:19:29 murray Exp $ +# $FreeBSD: doc/en_US.ISO8859-1/books/developers-handbook/Makefile,v 1.15 2002/08/19 04:38:24 chris Exp $ # # Build the FreeBSD Developers' Handbook. # ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/developers-handbook/book.sgml#5 (text+ko) ==== @@ -1,7 +1,7 @@ ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/fdp-primer/psgml-mode/chapter.sgml#2 (text+ko) ==== @@ -27,14 +27,14 @@ ANY WAY OUT OF THE USE OF THIS DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - $FreeBSD: doc/en_US.ISO8859-1/books/fdp-primer/psgml-mode/chapter.sgml,v 1.5 2001/11/05 07:13:36 murray Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/fdp-primer/psgml-mode/chapter.sgml,v 1.6 2002/08/17 19:58:12 blackend Exp $ --> Using <literal>sgml-mode</literal> with <application>Emacs</application> - Recent versions of Emacs or Xemacs (available from the ports + Recent versions of Emacs or XEmacs (available from the ports collection) contain a very useful package called PSGML. Automatically invoked when a file with the .sgml extension is loaded, or by typing M-x sgml-mode, it is a major mode for ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/fdp-primer/sgml-markup/chapter.sgml#3 (text+ko) ==== @@ -27,7 +27,7 @@ ANY WAY OUT OF THE USE OF THIS DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - $FreeBSD: doc/en_US.ISO8859-1/books/fdp-primer/sgml-markup/chapter.sgml,v 1.47 2002/05/22 14:17:36 ceri Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/fdp-primer/sgml-markup/chapter.sgml,v 1.48 2002/08/17 15:23:49 blackend Exp $ --> @@ -1497,8 +1497,8 @@ Some of the things the user will be seeing on the screen - are prompts from the computer (either from the OS, command - shell, or application. These should be marked up using + are prompts from the computer (either from the operating system, command + shell, or application). These should be marked up using prompt. As a special case, the two shell prompts for the normal @@ -1936,7 +1936,7 @@ With no role attribute (i.e., - hostid...hostid the + hostid.../hostid) the marked up information is the simple hostname, such as freefall or wcarchive. You can explicitly specify this with ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/fdp-primer/tools/chapter.sgml#3 (text+ko) ==== @@ -27,7 +27,7 @@ ANY WAY OUT OF THE USE OF THIS DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - $FreeBSD: doc/en_US.ISO8859-1/books/fdp-primer/tools/chapter.sgml,v 1.21 2002/05/30 08:10:27 murray Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/fdp-primer/tools/chapter.sgml,v 1.22 2002/08/17 19:59:05 blackend Exp $ --> @@ -248,7 +248,7 @@ Emacs or - xemacs + XEmacs (editors/emacs or editors/xemacs) ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/fdp-primer/writing-style/chapter.sgml#2 (text+ko) ==== @@ -27,7 +27,7 @@ ANY WAY OUT OF THE USE OF THIS DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - $FreeBSD: doc/en_US.ISO8859-1/books/fdp-primer/writing-style/chapter.sgml,v 1.26 2001/12/08 12:12:47 keramida Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/fdp-primer/writing-style/chapter.sgml,v 1.28 2002/08/18 00:56:58 bmah Exp $ --> @@ -141,7 +141,7 @@ Always use two spaces at the end of sentences, as this improves readability, and eases use of tools such as - emacs. + Emacs. While it may be argued that a capital letter following a period denotes a new sentence, this is not the case, especially @@ -220,9 +220,9 @@ ]]> If you use Emacs or - Xemacs to edit the files then + XEmacs to edit the files then sgml-mode should be loaded automatically, and the - Emacs local variables at the bottom of each file should enforce these + Emacs local variables at the bottom of each file should enforce these styles. ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml#5 (text+ko) ==== @@ -1,7 +1,7 @@ @@ -115,7 +115,7 @@ To illustrate different aspects of routing, we will use the following example from netstat: - &prompt.user; netstat -r + &prompt.user; netstat -r Routing tables Destination Gateway Flags Refs Use Netif Expire @@ -5433,7 +5433,7 @@ Sending <application>inetd</application> a HangUP Signal - &prompt.root; kill -HUP `cat /var/run/inetd.pid` + &prompt.root; kill -HUP `cat /var/run/inetd.pid` Each line of the configuration file specifies an ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/basics/chapter.sgml#4 (text+ko) ==== @@ -1,7 +1,7 @@ @@ -1316,8 +1316,8 @@ On systems without DEVFS, device nodes are created using the &man.MAKEDEV.8; script as shown below: - &prompt.root; cd /dev -&prompt.root; sh MAKEDEV ad1 + &prompt.root; cd /dev +&prompt.root; sh MAKEDEV ad1 This example would make the proper device nodes ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/config/chapter.sgml#4 (text+ko) ==== @@ -1,7 +1,7 @@ @@ -889,8 +889,8 @@ now we are only concerned with toggling Soft Updates on and off, which is done by: - &prompt.root; tunefs -n enable /filesystem -&prompt.root; tunefs -n disable /filesystem + &prompt.root; tunefs -n enable /filesystem +&prompt.root; tunefs -n disable /filesystem A filesystem cannot be modified with &man.tunefs.8; while it is mounted. A good time to enable Soft Updates is before any ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/cutting-edge/chapter.sgml#6 (text+ko) ==== @@ -1,7 +1,7 @@ @@ -760,7 +760,7 @@ As the superuser, you can execute - &prompt.root; + &prompt.root; shutdown now from a running system, which will drop it to single user mode. @@ -1364,7 +1364,7 @@ Remake all the devices. - &prompt.root; + &prompt.root; sh MAKEDEV all @@ -1428,7 +1428,7 @@ In this case, the fix would be to run: &prompt.root; cd /usr/src/usr.bin/file -&prompt.root; +&prompt.root; make all install ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/kernelconfig/chapter.sgml#4 (text+ko) ==== @@ -1,7 +1,7 @@ @@ -234,7 +234,7 @@ Be sure to always check the file /usr/src/UPDATING, before you perform any update steps, in the case you sync your source-tree with the + linkend="cutting-edge">sync your source tree with the latest sources of the FreeBSD project. In this file all important issues with updating FreeBSD are written down. /usr/src/UPDATING always fits @@ -357,7 +357,7 @@ The new kernel will be copied to the root directory as /kernel and the old kernel will be moved to /kernel.old. Now, shutdown the system and - reboot to use your kernel. In case something goes wrong, there are + reboot to use your new kernel. In case something goes wrong, there are some troubleshooting instructions at the end of this chapter. Be sure to read the section which explains how to recover in case your new kernel I586_CPU or I686_CPU), however, for a custom kernel, it is best to specify only the CPU you have. If you are unsure of your CPU type, - you can use the dmesg command to + you can use the &man.dmesg.8; command to view your boot up messages. kernel options @@ -615,10 +615,10 @@ options SOFTUPDATES #Enable FFS soft updates support - This option enables soft updates in the kernel, this will help speed + This option enables Soft Updates in the kernel, this will help speed up write access on the disks. They are enabled by default in the 4.X branch but may not be turned on. Review the output from &man.mount.8; to see - if you have them enabled. If you do not see the soft-updates option then + if you have them enabled. If you do not see the soft-updates option then you will need to activate it using the &man.tunefs.8; or &man.newfs.8; for new filesystems. @@ -702,9 +702,9 @@ options UCONSOLE #Allow users to grab the console Allow users to grab the console, which is useful for X users. - For example, you can create a console xterm by typing xterm - -C, which will display any write, - talk, and any other messages you receive, as well + For example, you can create a console xterm by typing xterm + -C, which will display any &man.write.1;, + &man.talk.1;, and any other messages you receive, as well as any console messages sent by the kernel. options USERCONFIG #boot -c editor @@ -778,8 +778,8 @@ device isa All PCs supported by FreeBSD have one of these. If you have an - IBM PS/2 (Micro Channel Architecture), you cannot run FreeBSD at - this time (support is being worked on). + IBM PS/2 (Micro Channel Architecture), FreeBSD provides some limited support at + this time. For more information about the MCA support, see /usr/src/sys/i386/conf/LINT. device eisa @@ -1112,7 +1112,7 @@ It is used by incoming telnet and rlogin sessions, xterm, and some other applications such - as emacs. A + as Emacs. A number after pty indicates the number of ptys to create. If you need more than the default of 16 simultaneous xterm windows @@ -1123,7 +1123,7 @@ Memory disk pseudo-devices. - pesudo-device gif + pseudo-device gif or @@ -1258,16 +1258,16 @@ config fails: - If the config command fails when you + If the &man.config.8; command fails when you give it your kernel description, you have probably made a simple error somewhere. Fortunately, - config will print the line number that it + &man.config.8; will print the line number that it had trouble with, so you can quickly skip to it with - vi. For example, if you see: + vi. For example, if you see: config: line 17: syntax error - You can skip to the problem in vi by + You can skip to the problem in vi by typing 17G in command mode. Make sure the keyword is typed correctly, by comparing it to the GENERIC kernel or another @@ -1281,7 +1281,7 @@ If the make command fails, it usually signals an error in your kernel description, but not severe - enough for config to catch it. Again, look + enough for &man.config.8; to catch it. Again, look over your configuration, and if you still cannot resolve the problem, send mail to the &a.questions; with your kernel configuration, and it should be diagnosed very quickly. @@ -1289,7 +1289,7 @@ - Installing the new kernel fails + Installing the new kernel fails: If the kernel compiled fine, but failed to install @@ -1306,17 +1306,17 @@ - The kernel will not boot:The kernel does not boot: If your new kernel does not boot, or fails to - recognize your devices, do not panic! Fortunately, BSD has + recognize your devices, do not panic! Fortunately, FreeBSD has an excellent mechanism for recovering from incompatible kernels. Simply choose the kernel you want to boot from at the FreeBSD boot loader. You can access this when the system counts down from 10. Hit any key except for the - enter key, type unload + Enter key, type unload and then type boot kernel.old, or the filename of any other kernel that will boot properly. @@ -1365,8 +1365,8 @@ - The kernel works, but ps does not work - any more!: + The kernel works, but &man.ps.1; does not work + any more: If you have installed a different version of the kernel ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/linuxemu/chapter.sgml#4 (text+ko) ==== @@ -1,7 +1,7 @@ @@ -624,8 +624,8 @@ Test-start maple: - &prompt.user; cd /usr/local/maple/bin -&prompt.user; ./xmaple + &prompt.user; cd /usr/local/maple/bin +&prompt.user; ./xmaple You should be up and running. Make sure to write Maplesoft to let them know you would like a native FreeBSD @@ -1872,7 +1872,7 @@ Then the install-script is started, which will copy nearly all the relevant files into the install-directory: - &prompt.root; /oracle/<SID>/sapreorg/KERNEL/UNIX/INSTTOOL.SH + &prompt.root; /oracle/<SID>/sapreorg/KERNEL/UNIX/INSTTOOL.SH The IDES-Installation (4.6B) comes with a fully customized SAP R/3 Demo-System, so there are six instead of just three @@ -2859,9 +2859,9 @@ To continue with the installation, I created a link and an additional directory: - &prompt.root; pwd + &prompt.root; pwd /compat/linux/usr/sap -&prompt.root; ls -l +&prompt.root; ls -l total 4 drwxr-xr-x 3 idsadm sapsys 512 May 5 11:20 D00 drwxr-x--x 5 idsadm sapsys 512 May 5 11:35 IDS ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/multimedia/chapter.sgml#2 (text+ko) ==== @@ -1,7 +1,7 @@ @@ -294,7 +294,7 @@ After you reboot, log in and run dmesg | grep pcm as shown below: - &prompt.root; dmesg | grep pcm + &prompt.root; dmesg | grep pcm pcm0: <SB16 DSP 4.11> on sbc0 The output from your system may look different. If no @@ -308,8 +308,8 @@ pcm0, you will have to run the following as root: - &prompt.root; cd /dev -&prompt.root; sh MAKEDEV snd0 + &prompt.root; cd /dev +&prompt.root; sh MAKEDEV snd0 If the command returned pcm1, follow the same steps as shown above, replacing @@ -383,7 +383,7 @@ your soundcard, you can put a CD in the drive and play it with &man.cdcontrol.1;. - &prompt.user; cdcontrol -f /dev/acd0c play 1 + &prompt.user; cdcontrol -f /dev/acd0c play 1 Various applications, such as audio/workman offer a better @@ -470,8 +470,8 @@ To set the number of virtual channels, there are two sysctl knobs which, if you are the root user, can be set like this: - &prompt.root; sysctl hw.snd.pcm0.vchans=4 -&prompt.root; sysctl hw.snd.maxautovchans=4 + &prompt.root; sysctl hw.snd.pcm0.vchans=4 +&prompt.root; sysctl hw.snd.maxautovchans=4 The above example allocates four virtual channels, which is a practical number for everyday use. hw.snd.pcm0.vchans @@ -538,7 +538,7 @@ the sound device and the MP3 file on the command line, as shown below: - &prompt.root; mpg123 -a /dev/dsp1.0 Foobar-GreatestHits.mp3 + &prompt.root; mpg123 -a /dev/dsp1.0 Foobar-GreatestHits.mp3 High Performance MPEG 1.0/2.0/2.5 Audio Player for Layer 1, 2 and 3. Version 0.59r (1999/Jun/15). Written and copyrights by Michael Hipp. Uses code from various people. See 'README' for more! @@ -574,14 +574,14 @@ be issued (as root) to rip an entire CD into individual (per track) WAV files: - &prompt.root; cdda2wav -D 0,1,0 -B + &prompt.root; cdda2wav -D 0,1,0 -B cdda2wav will support ATAPI (IDE) CDROM drives. To rip from an IDE drive, specify the device name in place of the SCSI unit numbers. For example, to rip track 7 from an IDE drive: - &prompt.root; cdda2wav -D /dev/acd0a -t 7 + &prompt.root; cdda2wav -D /dev/acd0a -t 7 The indicates the SCSI device 0,1,0, @@ -591,13 +591,13 @@ To rip individual tracks, make use of the option as shown: - &prompt.root; cdda2wav -D 0,1,0 -t 7 + &prompt.root; cdda2wav -D 0,1,0 -t 7 This example rips track seven of the audio CDROM. To rip a range of tracks, for example, track one to seven, specify a range: - &prompt.root; cdda2wav -D 0,1,0 -t 1+7 + &prompt.root; cdda2wav -D 0,1,0 -t 1+7 @@ -613,14 +613,14 @@ convert audio01.wav to audio01.mp3: - &prompt.root; lame -h -b 128 \ + &prompt.root; lame -h -b 128 \ --tt "Foo Song Title" \ --ta "FooBar Artist" \ --tl "FooBar Album" \ --ty "2001" \ --tc "Ripped and encoded by Foo" \ --tg "Genre" \ -audio01.wav audio01.mp3 +audio01.wav audio01.mp3 128 kbits seems to be the standard MP3 bitrate in use. Many enjoy the higher quality 160, or 192. The higher the @@ -746,14 +746,14 @@ name hardcoded in them, you might find it useful to make symbolic links to the proper devices: - &prompt.root; ln -sf /dev/acd0c /dev/dvd -&prompt.root; ln -sf /dev/racd0c /dev/rdvd + &prompt.root; ln -sf /dev/acd0c /dev/dvd +&prompt.root; ln -sf /dev/racd0c /dev/rdvd On FreeBSD 5.X, which uses &man.devfs.5; there is a slightly different set of recommended links: - &prompt.root; ln -sf /dev/acd0c /dev/dvd -&prompt.root; ln -sf /dev/acd0c /dev/rdvd + &prompt.root; ln -sf /dev/acd0c /dev/dvd +&prompt.root; ln -sf /dev/acd0c /dev/rdvd Additionally, DVD decryption, which requires invoking special DVD-ROM functions, requires write permission on the DVD @@ -851,7 +851,7 @@ To check whether the extension is running, use xvinfo: - &prompt.user; xvinfo + &prompt.user; xvinfo XVideo is supported for your card if the result looks like: X-Video Extension version 2.2 @@ -924,7 +924,7 @@ red, green, blue masks: 0x0, 0x0, 0x0 Also note that the formats listed (YUV2, YUV12, etc) are not - present with every implementation of XVideo and their absense may + present with every implementation of XVideo and their absence may hinder some players. If the result looks like: @@ -1096,8 +1096,8 @@ make which echo at the start of the build. - &prompt.root; cd /usr/ports/graphics/mplayer -&prompt.root; make + &prompt.root; cd /usr/ports/graphics/mplayer +&prompt.root; make You can enable additional compilation optimizations by defining WITH_OPTIMIZED_CFLAGS You can enable GTK GUI by defining WITH_GUI. @@ -1117,7 +1117,7 @@ before enabling this option. . Some reasonable options are: - &prompt.root; make WITH_DVD=yes WITH_SVGALIB=yes + &prompt.root; make WITH_DVD=yes WITH_SVGALIB=yes As of this writing, the MPlayer port will build its HTML documentation and one executable, @@ -1147,8 +1147,8 @@ home directory. To create this necessary subdirectory, you can do the following: -&prompt.user; cd /usr/ports/graphics/mplayer -&prompt.user; make install-user +&prompt.user; cd /usr/ports/graphics/mplayer +&prompt.user; make install-user The command options for mplayer are listed in the manual page. For even more detail there is HTML @@ -1159,11 +1159,11 @@ testfile.avi through one of the various video interfaces set the : - &prompt.user; mplayer -vo xv testfile.avi - &prompt.user; mplayer -vo sdl testfile.avi - &prompt.user; mplayer -vo x11 testfile.avi - &prompt.root; mplayer -vo dga testfile.avi - &prompt.root; mplayer -vo 'sdl:dga' testfile.avi + &prompt.user; mplayer -vo xv testfile.avi + &prompt.user; mplayer -vo sdl testfile.avi + &prompt.user; mplayer -vo x11 testfile.avi + &prompt.root; mplayer -vo dga testfile.avi + &prompt.root; mplayer -vo 'sdl:dga' testfile.avi It is worth trying all of these options, as their relative performance depends on many factors and will vary significantly @@ -1177,7 +1177,7 @@ device node for the DVD-ROM. For example, to play title 3 from /dev/dvd: - &prompt.root; mplayer -vo dga -dvd 2 /dev/dvd + &prompt.root; mplayer -vo dga -dvd 2 /dev/dvd To stop, pause, advance and so on, consult the keybindings, which are output by running mplayer @@ -1198,7 +1198,7 @@ Finally, mplayer can be used to rip a DVD title into a .vob file. To dump out title 2 from a DVD: - &prompt.root; mplayer -dumpstream -dumpfile out.vob -dvd 2 /dev/dvd + &prompt.root; mplayer -dumpstream -dumpfile out.vob -dvd 2 /dev/dvd The output file, out.vob, will be MPEG and can be manipulated by the other packages described @@ -1224,7 +1224,7 @@ or bad performance. Here are a couple of examples to get you going. First a simple copy: - &prompt.user; mencoder input.avi -oac copy -ovc copy -o output.avi + &prompt.user; mencoder input.avi -oac copy -ovc copy -o output.avi It is easy to find examples where the output is unplayable even by mplayer. Thus, if you @@ -1234,8 +1234,8 @@ To convert input.avi to the MPEG4 codec with MPEG3 audio encoding (audio/lame is required): - &prompt.user; mencoder input.avi -oac mp3lame -lameopts br=192 \ - -ovc lavc -lavcopts vcodec=mpeg4:vhq -o output.avi + &prompt.user; mencoder input.avi -oac mp3lame -lameopts br=192 \ + -ovc lavc -lavcopts vcodec=mpeg4:vhq -o output.avi This has produced output playable by mplayer and xine. @@ -1278,13 +1278,13 @@ The xine player can be started by itself: - &prompt.user; xine + &prompt.user; xine The menus can then be used to open a file, or it can be started to play a file immediately without the GUI with the command: - &prompt.user; xine -g -p mymovie.avi + &prompt.user; xine -g -p mymovie.avi @@ -1303,26 +1303,26 @@ many options to the make command. I recommend: - &prompt.root; make WITH_LIBMPEG2=yes + &prompt.root; make WITH_LIBMPEG2=yes If you plan to install graphics/avifile, then add the WITH_AVIFILE option to your make command line, as shown here: - &prompt.root; make WITH_AVIFILE=yes WITH_LIBMPEG2=yes + &prompt.root; make WITH_AVIFILE=yes WITH_LIBMPEG2=yes Here are two examples of using transcode for video conversion which produce rescaled output. The first encodes the output to an openDIVX AVI file, while the second encodes to the much more portable MPEG format. - &prompt.user; transcode -i input.vob -x vob -V -Z 320x240 \ --y opendivx -N 0x55 -o output.avi + &prompt.user; transcode -i input.vob -x vob -V -Z 320x240 \ +-y opendivx -N 0x55 -o output.avi - &prompt.user; transcode -i input.vob -x vob -V -Z 320x240 \ --y mpeg -N 0x55 -o output.tmp -&prompt.user; tcmplex -o output.mpg -i output.tmp.m1v -p output.tmp.mpa -m 1 + &prompt.user; transcode -i input.vob -x vob -V -Z 320x240 \ +-y mpeg -N 0x55 -o output.tmp +&prompt.user; tcmplex -o output.mpg -i output.tmp.m1v -p output.tmp.mpa -m 1 There is a manual page for transcode, but for the various tc* utilities (such as ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/ports/chapter.sgml#4 (text+ko) ==== @@ -1,7 +1,7 @@ @@ -477,7 +477,7 @@ As root, run /stand/sysinstall as shown below: - &prompt.root; /stand/sysinstall + &prompt.root; /stand/sysinstall @@ -556,7 +556,7 @@ Run cvsup: - &prompt.root; cvsup -g -L 2 /root/ports-supfile + &prompt.root; cvsup -g -L 2 /root/ports-supfile ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/ppp-and-slip/chapter.sgml#5 (text+ko) ==== @@ -1,7 +1,7 @@ @@ -222,7 +222,7 @@ role="netmask">255.255.255.255. - + static IP address @@ -326,17 +326,17 @@ We have now started ppp -ppp ON example> set device /dev/cuaa1 +ppp ON example> set device /dev/cuaa1 We set our modem device, in this case it is cuaa1 -ppp ON example> set speed 115200 +ppp ON example> set speed 115200 Set the connection speed, in this case we are using 115,200 kbps -ppp ON example> enable dns +ppp ON example> enable dns Tell ppp to configure our resolver and add the nameserver lines to @@ -344,7 +344,7 @@ cannot determine our hostname, we can set one manually later -ppp ON example> term +ppp ON example> term Switch to "terminal" mode so that we can manually control the modem @@ -406,7 +406,7 @@ We have made an agreement on an IP address and successfully completed our connection -PPP ON example>add default HISADDR +PPP ON example>add default HISADDR Here we add our default route, we need to do this before we can talk to the outside world as currently the ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/printing/chapter.sgml#2 (text+ko) ==== @@ -1,7 +1,7 @@ @@ -522,7 +522,7 @@ Change to the /dev directory: - &prompt.root; cd /dev + &prompt.root; cd /dev ==== //depot/projects/trustedbsd/doc/en_US.ISO8859-1/books/handbook/security/chapter.sgml#6 (text+ko) ==== @@ -1,7 +1,7 @@ @@ -2545,12 +2545,12 @@ Now try doing the su: - &prompt.user; su + &prompt.user; su Password: and take a look at what tokens we have: - &prompt.root; klist + &prompt.root; klist >>> TRUNCATED FOR MAIL (1000 lines) <<< To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe p4-projects" in the body of the message