Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 06 May 1997 11:27:25 +0300 (IDT)
From:      Gennady Sorokopud <gena@NetVision.net.il>
To:        current@freebsd.org
Subject:   Another panic
Message-ID:  <XFMail.970506113016.gena@NetVision.net.il>

next in thread | raw e-mail | index | archive | help
Hello!

I already send two bug reports about panics on my -current. Here is another one:

Fatal trap 12: page fault while in kernel mode
fault virtual address          = 0xf06e7ffc
fault code                     = supervisor read, page not present
instruction pointer            = 0x8:0xf017f8c9
stack pointer                  = 0x10:0xf4145d14
frame pointer                  = 0x10:0xf4195d38
code segment                   = base 0x0, limit 0xfffff, type 0x1b
                               = DPL0 , pres 1 , def 321 , gran 1
processor eflags               = interrupt enabled, resum, IOPL = 0
current process                = 4407 (ls)
interrupt mask                 =
kernel: type 12 trap, code = 0

Stopped at _generic_bcopy+0x41:  repe movsl (%esi),%es:(%edi)
-------------------trace--------------
_generic_bcopy(f0797b80,f08f4680,f4145ed4,f06f40d8,f0797b80)
_ufs_lookup+0xccc
_lookup+0x2c1
_namei+0x11b
_lstat_0x44
_syscall+0x127
_Xsyscall+0x35
--- syscall 0xbe, eip = 0x1bbf5, esp = 0xefbfdd10, ebp = 0xefbfdd88

------ dmesg output ---------------

Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Sun May  4 14:27:48 IDT 1997
    root@Burka.NetVision.net.il:/usr/src/sys/compile/BURKA
CPU: Pentium (90.00-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x525  Stepping=5
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 41943040 (40960K bytes)
avail memory = 39329792 (38408K bytes)
Probing for devices on PCI bus 0:
chip0 <SiS 85c501> rev 64 on pci0:0:0
chip1 <SiS 85c503> rev 1 on pci0:1:0
pci0:8:    CMD, device=0x0640, class=storage (ide) int a irq 14 [no driver
assigned]
vga0 <VGA-compatible display device> rev 0 int a irq ?? on pci0:9:0
pci0:11:    vendor=0x10b7, device=0x5900, class=network (ethernet) int a irq 9
[no driver assigned]
ahc0 <Adaptec 2940 SCSI host adapter> rev 0 int a irq 11 on pci0:12:0
ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs
scbus0 at ahc0 bus 0
sd0 at scbus0 target 0 lun 0
sd0: <HP C3725S 4299> type 0 fixed SCSI 2
sd0: Direct-Access 2069MB (4238836 512 byte sectors)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
1 3C5x9 board(s) on ISA found at 0x300
ep0 at 0x300-0x30f irq 10 on isa
ep0: utp[*UTP*] address 00:60:97:23:a2:8b
npx0 flags 0x7 on motherboard
npx0: INT 16 interface
WARNING: / was not properly dismounted.

----------- kernel config ----------------

#
# BURKA -- my desktop machine
#
#       $Id: BURKA,v 1.1 1995/01/26 11:38:00 gena Exp $
#

machine         "i386"
cpu             "I586_CPU"
maxusers        20
ident           BURKA

options         INET                    #InterNETworking

options         FFS                     #Berkeley Fast File System
options         PROCFS                  #Process File System
options         DDB
options         "COMPAT_43"             #Compatible with BSD 4.3
options         SYSVSHM
options         SYSVSEM
options         SYSVMSG
options         UCONSOLE                #X Console support
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor

config          kernel  root on sd0

controller      isa0

controller      fdc0    at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk            fd0     at fdc0 drive 0

device          sc0     at isa? port "IO_KBD" tty irq 1 vector scintr

device          npx0    at isa? port "IO_NPX" iosiz 0x0 flags 0x07 irq 13 vector npxintr

device          sio0    at isa? port "IO_COM1" tty flags 0x00 irq 4 vector siointr
device          sio1    at isa? port "IO_COM2" tty flags 0x00 irq 3 vector siointr

device          lpt0    at isa? port? tty irq 7 vector lptintr

device          ep0     at isa? port 0x300 net irq 10 vector epintr

controller      pci0
controller      ahc1
controller      scbus0

#device         vx0
device          sd0

pseudo-device   snp     1               #Snoop device - to look at pty/vty/etc..
pseudo-device   loop
pseudo-device   ether
pseudo-device   log
pseudo-device   tun     1
pseudo-device   pty     16
pseudo-device   speaker
pseudo-device   bpfilter        1       #berkeley packet filter

Best regards.
--------
 Gennady B. Sorokopud - System programmer at NetVision Israel.
 E-Mail: Gennady Sorokopud <gena@NetVision.net.il>
 PGP public key is available by fingering gena@netvision.net.il

 This message was sent at 06-May-97 11:27:25 by XFMail



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.970506113016.gena>