Date: Wed, 10 Aug 2005 07:38:02 +0000 From: "Bruce O'Neel" <edoneel@sdf.lonestar.org> To: freebsd-sparc64@freebsd.org Subject: Sun Ultra 2 and hme not in full duplex Message-ID: <20050810073802.GB9599@SDF.LONESTAR.ORG>
next in thread | raw e-mail | index | archive | help
Hi, When I boot my sun ultra 2 with a hme, my switch doesn't see the connection as full duplex. The line in rc.conf is: ifconfig_hme0="inet 192.168.0.8 netmask 255.255.255.0 media autoselect" Adding or removing the media autoselect seems to make no difference. An ifconfig shows: biasca# ifconfig hme0 hme0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=b<RXCSUM,TXCSUM,VLAN_MTU> inet 192.168.0.8 netmask 0xffffff00 broadcast 192.168.0.255 inet6 fe80::a00:20ff:fe89:99ba%hme0 prefixlen 64 scopeid 0x1 ether 08:00:20:89:99:ba media: Ethernet autoselect (100baseTX) status: active Now, if I type ifconfig hme0 media autoselect the interface drops off the switch and then comes back up in full duplex. Now ifconfig shows: biasca# ifconfig hme0 hme0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=b<RXCSUM,TXCSUM,VLAN_MTU> inet 192.168.0.8 netmask 0xffffff00 broadcast 192.168.0.255 inet6 fe80::a00:20ff:fe89:99ba%hme0 prefixlen 64 scopeid 0x1 ether 08:00:20:89:99:ba media: Ethernet autoselect (100baseTX <full-duplex>) status: active Is there a handy way to make this happen on boot? Thanks! cheers bruce -- edoneel@sdf.lonestar.org SDF Public Access UNIX System - http://sdf.lonestar.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050810073802.GB9599>