Date: Wed, 10 Feb 2016 19:34:24 +0000 (UTC) From: Kurt Jaeger <pi@FreeBSD.org> To: ports-committers@freebsd.org, svn-ports-all@freebsd.org, svn-ports-head@freebsd.org Subject: svn commit: r408645 - in head/cad/p5-Verilog-Perl: . files Message-ID: <201602101934.u1AJYO9h063204@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: pi Date: Wed Feb 10 19:34:24 2016 New Revision: 408645 URL: https://svnweb.freebsd.org/changeset/ports/408645 Log: cad/p5-Verilog-Perl: 3.404 -> 3.418 Changes: http://cpansearch.perl.org/src/WSNYDER/Verilog-Perl-3.418/Changes Removed dependency of gcc. Now, p5-Verilog-Perl compiles with clang. PR: 207050 Submitted by: otacilio.neto@ee.ufcg.edu.br (maintainer) Modified: head/cad/p5-Verilog-Perl/Makefile head/cad/p5-Verilog-Perl/distinfo head/cad/p5-Verilog-Perl/files/patch-Makefile.PL head/cad/p5-Verilog-Perl/files/patch-Parser__Makefile.PL head/cad/p5-Verilog-Perl/files/patch-Preproc__Makefile.PL head/cad/p5-Verilog-Perl/pkg-plist Modified: head/cad/p5-Verilog-Perl/Makefile ============================================================================== --- head/cad/p5-Verilog-Perl/Makefile Wed Feb 10 19:11:22 2016 (r408644) +++ head/cad/p5-Verilog-Perl/Makefile Wed Feb 10 19:34:24 2016 (r408645) @@ -1,9 +1,8 @@ -# Created by: Otacilio de Araujo Ramos Neto <otacilio.neto@ee.ufcg.edu.br> +# Created by: Otacilio de Araujo Ramos Neto <otacilio.neto@bsd.com.br> # $FreeBSD$ PORTNAME= Verilog-Perl -PORTVERSION= 3.404 -PORTREVISION= 1 +PORTVERSION= 3.418 CATEGORIES= cad perl5 MASTER_SITES= CPAN PKGNAMEPREFIX= p5- @@ -15,7 +14,6 @@ BUILD_DEPENDS= flex>=2.5.35:${PORTSDIR}/ USES= bison gmake perl5 USE_PERL5= configure -USE_GCC= any CONFIGURE_ENV= CXX=${CXX}\ CPP=${CPP}\ CC=${CC} Modified: head/cad/p5-Verilog-Perl/distinfo ============================================================================== --- head/cad/p5-Verilog-Perl/distinfo Wed Feb 10 19:11:22 2016 (r408644) +++ head/cad/p5-Verilog-Perl/distinfo Wed Feb 10 19:34:24 2016 (r408645) @@ -1,2 +1,2 @@ -SHA256 (Verilog-Perl-3.404.tar.gz) = 4eddc21a965019eecc2200e251186f9d8bd0643485d12feda7d0b26a328650d0 -SIZE (Verilog-Perl-3.404.tar.gz) = 558496 +SHA256 (Verilog-Perl-3.418.tar.gz) = 19eb60cb211fe6dbe6f9705f973e72c9ffd370399c39f0871652d4bee61492e8 +SIZE (Verilog-Perl-3.418.tar.gz) = 562256 Modified: head/cad/p5-Verilog-Perl/files/patch-Makefile.PL ============================================================================== --- head/cad/p5-Verilog-Perl/files/patch-Makefile.PL Wed Feb 10 19:11:22 2016 (r408644) +++ head/cad/p5-Verilog-Perl/files/patch-Makefile.PL Wed Feb 10 19:34:24 2016 (r408645) @@ -1,6 +1,6 @@ ---- Makefile.PL 2014-03-11 19:59:40.000000000 -0300 -+++ Makefile.PL 2014-06-25 11:18:59.000000000 -0300 -@@ -11,7 +11,7 @@ +--- Makefile.PL.orig 2016-02-02 23:36:13 UTC ++++ Makefile.PL +@@ -11,7 +11,7 @@ use Config; sub MY::postamble { my $out=""; @@ -8,8 +8,8 @@ + # Note OPTIMIZE is passed from upper gmakefile, so this code needed there too. # -O2 optimization seems unreasonably slow on nearly every platform. I give up. my $optimize = $Config{optimize}; $optimize =~ s/(^| )-O2( |$)/\1-O\2/g; - $out .= "OPTIMIZE = $optimize\n"; -@@ -82,6 +82,8 @@ + # pass hardening flags +@@ -86,6 +86,8 @@ cppcheck: $(CPPCHECK_DEP) return $out; } @@ -18,7 +18,7 @@ my $fail; local $! = undef; my $have_gen = -d "Preproc/gen"; -@@ -93,7 +95,7 @@ +@@ -97,7 +99,7 @@ my $have_gen = -d "Preproc/gen"; if ($have_gen) { warn "\n-Note: 'bison' must be installed to build from sources\n"; } else { $fail=1; warn "\n%Error: 'bison' must be installed to build\n\n"; } } @@ -27,7 +27,7 @@ if ($fail) { if ($ENV{AUTOMATED_TESTING}) { exit(0); -@@ -135,8 +137,8 @@ +@@ -139,7 +141,7 @@ WriteMakefile( }, ); @@ -36,4 +36,3 @@ if ($? || $mkv !~ /GNU Make/i) { warn "-Important: Now type 'gmake MAKE=gmake' as this package requires GNU Make\n"; } - 1; Modified: head/cad/p5-Verilog-Perl/files/patch-Parser__Makefile.PL ============================================================================== --- head/cad/p5-Verilog-Perl/files/patch-Parser__Makefile.PL Wed Feb 10 19:11:22 2016 (r408644) +++ head/cad/p5-Verilog-Perl/files/patch-Parser__Makefile.PL Wed Feb 10 19:34:24 2016 (r408645) @@ -1,6 +1,6 @@ ---- Parser/Makefile.PL 2014-03-11 19:59:40.000000000 -0300 -+++ Parser/Makefile.PL 2014-06-25 11:19:19.000000000 -0300 -@@ -9,13 +9,15 @@ +--- Parser/Makefile.PL.orig 2016-02-02 23:36:13 UTC ++++ Parser/Makefile.PL +@@ -9,13 +9,15 @@ use Config; sub MY::postamble { my $out; @@ -17,7 +17,7 @@ } # Note OPTIMIZE is passed from upper makefile, so this code needed there too. my $optimize = $Config{optimize}; $optimize =~ s/(^| )-O2( |$)/\1-O\2/g; -@@ -46,7 +48,7 @@ +@@ -50,7 +52,7 @@ sub MY::postamble { $out .= "${cmt}CFLAGS += -DFLEX_DEBUG\n"; $out .= "LEXFLAGS += -d\n"; $out .= ' Modified: head/cad/p5-Verilog-Perl/files/patch-Preproc__Makefile.PL ============================================================================== --- head/cad/p5-Verilog-Perl/files/patch-Preproc__Makefile.PL Wed Feb 10 19:11:22 2016 (r408644) +++ head/cad/p5-Verilog-Perl/files/patch-Preproc__Makefile.PL Wed Feb 10 19:34:24 2016 (r408645) @@ -1,6 +1,6 @@ ---- Preproc/Makefile.PL 2014-03-11 19:59:40.000000000 -0300 -+++ Preproc/Makefile.PL 2014-06-25 11:19:37.000000000 -0300 -@@ -9,13 +9,14 @@ +--- Preproc/Makefile.PL.orig 2016-02-02 23:36:13 UTC ++++ Preproc/Makefile.PL +@@ -9,13 +9,14 @@ use Config; sub MY::postamble { my $out; @@ -16,7 +16,7 @@ } # Note OPTIMIZE is passed from upper makefile, so this code needed there too. my $optimize = $Config{optimize}; $optimize =~ s/(^| )-O2( |$)/\1-O\2/g; -@@ -46,7 +47,7 @@ +@@ -50,7 +51,7 @@ sub MY::postamble { $out .= "${cmt}CFLAGS += -DFLEX_DEBUG\n"; $out .= "${cmt}LEXFLAGS += -d\n"; $out .= ' Modified: head/cad/p5-Verilog-Perl/pkg-plist ============================================================================== --- head/cad/p5-Verilog-Perl/pkg-plist Wed Feb 10 19:11:22 2016 (r408644) +++ head/cad/p5-Verilog-Perl/pkg-plist Wed Feb 10 19:34:24 2016 (r408645) @@ -3,27 +3,6 @@ bin/vpassert bin/vppreproc bin/vrename bin/vsplitmodule -%%PERL5_MAN3%%/Verilog::EditFiles.3.gz -%%PERL5_MAN3%%/Verilog::Getopt.3.gz -%%PERL5_MAN3%%/Verilog::Language.3.gz -%%PERL5_MAN3%%/Verilog::Netlist.3.gz -%%PERL5_MAN3%%/Verilog::Netlist::Cell.3.gz -%%PERL5_MAN3%%/Verilog::Netlist::ContAssign.3.gz -%%PERL5_MAN3%%/Verilog::Netlist::Defparam.3.gz -%%PERL5_MAN3%%/Verilog::Netlist::File.3.gz -%%PERL5_MAN3%%/Verilog::Netlist::Interface.3.gz -%%PERL5_MAN3%%/Verilog::Netlist::Logger.3.gz -%%PERL5_MAN3%%/Verilog::Netlist::ModPort.3.gz -%%PERL5_MAN3%%/Verilog::Netlist::Module.3.gz -%%PERL5_MAN3%%/Verilog::Netlist::Net.3.gz -%%PERL5_MAN3%%/Verilog::Netlist::Pin.3.gz -%%PERL5_MAN3%%/Verilog::Netlist::Port.3.gz -%%PERL5_MAN3%%/Verilog::Netlist::Subclass.3.gz -%%PERL5_MAN3%%/Verilog::Parser.3.gz -%%PERL5_MAN3%%/Verilog::Preproc.3.gz -%%PERL5_MAN3%%/Verilog::SigParser.3.gz -%%PERL5_MAN3%%/Verilog::Std.3.gz -%%PERL5_MAN3%%/Verilog::Verilog-Perl.3.gz %%SITE_ARCH%%/Verilog/EditFiles.pm %%SITE_ARCH%%/Verilog/Getopt.pm %%SITE_ARCH%%/Verilog/Language.pm @@ -51,3 +30,24 @@ bin/vsplitmodule %%PERL5_MAN1%%/vpassert.1.gz %%PERL5_MAN1%%/vppreproc.1.gz %%PERL5_MAN1%%/vrename.1.gz +%%PERL5_MAN3%%/Verilog::EditFiles.3.gz +%%PERL5_MAN3%%/Verilog::Getopt.3.gz +%%PERL5_MAN3%%/Verilog::Language.3.gz +%%PERL5_MAN3%%/Verilog::Netlist.3.gz +%%PERL5_MAN3%%/Verilog::Netlist::Cell.3.gz +%%PERL5_MAN3%%/Verilog::Netlist::ContAssign.3.gz +%%PERL5_MAN3%%/Verilog::Netlist::Defparam.3.gz +%%PERL5_MAN3%%/Verilog::Netlist::File.3.gz +%%PERL5_MAN3%%/Verilog::Netlist::Interface.3.gz +%%PERL5_MAN3%%/Verilog::Netlist::Logger.3.gz +%%PERL5_MAN3%%/Verilog::Netlist::ModPort.3.gz +%%PERL5_MAN3%%/Verilog::Netlist::Module.3.gz +%%PERL5_MAN3%%/Verilog::Netlist::Net.3.gz +%%PERL5_MAN3%%/Verilog::Netlist::Pin.3.gz +%%PERL5_MAN3%%/Verilog::Netlist::Port.3.gz +%%PERL5_MAN3%%/Verilog::Netlist::Subclass.3.gz +%%PERL5_MAN3%%/Verilog::Parser.3.gz +%%PERL5_MAN3%%/Verilog::Preproc.3.gz +%%PERL5_MAN3%%/Verilog::SigParser.3.gz +%%PERL5_MAN3%%/Verilog::Std.3.gz +%%PERL5_MAN3%%/Verilog::Verilog-Perl.3.gz
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201602101934.u1AJYO9h063204>