Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 22 Jun 2021 02:15:14 -0700
From:      Mark Millard via freebsd-arm <freebsd-arm@freebsd.org>
To:        Dan Kotowski <dan.kotowski@a9development.com>
Cc:        dsl@mcusim.org, freebsd-arm <freebsd-arm@freebsd.org>
Subject:   Re: HoneyComb first-boot notes
Message-ID:  <C4D3B585-63B6-4C2A-B8DA-264073C6E2C2@yahoo.com>
In-Reply-To: <Rv9QGaKflpIjLPsxUFG3ht12loej__FxMBy7SQ1QzDTk1NLcFjGb4ScQuF32SakZi68wjgPQpIVp2dipMoYteJIAMhSrXbPM6-mRSeL_744=@a9development.com>
References:  <8A6C415F-A57B-4F2F-861F-052B487166D6.ref@yahoo.com> <8A6C415F-A57B-4F2F-861F-052B487166D6@yahoo.com> <YNGT5hcHOBd6cU4T@x230.ds> <40AE6447-77AF-4D0E-864F-AD52D9F3346F@yahoo.com> <YNGf999RsaTfNhcp@x230.ds> <Rv9QGaKflpIjLPsxUFG3ht12loej__FxMBy7SQ1QzDTk1NLcFjGb4ScQuF32SakZi68wjgPQpIVp2dipMoYteJIAMhSrXbPM6-mRSeL_744=@a9development.com>

next in thread | previous in thread | raw e-mail | index | archive | help


On 2021-Jun-22, at 01:40, Dan Kotowski <dan.kotowski at =
a9development.com> wrote:
>=20
>>>>> I put an existing FreeBSD Optane into a just delivered
>>>>>=20
>>>>> HoneyComb, put in the RAM and the matching UEFI/ACPI
>>>>>=20
>>>>> image on a microsd card and put the card in the slot.
>>>>>=20
>>>>> I plugged in a USB3 Ethernet dongle, like I use on some
>>>>>=20
>>>>> other systems. Serial console via its USB port for such.
>>>>>=20
>>>>> (Optane instead of video card.) The UEFI/ACPI image was
>>>>>=20
>>>>> extracted from:
>>>>>=20
>>>>> =
https://solid-run-images.sos-de-fra-1.exo.io/LX2k/lx2160a_uefi/lx2160acex7=
_2000_700_2900_8_5_2_sd_81b4bbe.img.xz
>>>>>=20
>>>>> in order to match the RAM and being based on the
>>>>>=20
>>>>> most current vintage at:
>>>>>=20
>>>>> https://github.com/SolidRun/lx2160a_uefi/
>>>>>=20
>>>>> It booted.
>>>>=20
>>>> Could you share whole dmesg?
>>>=20
>>> I've not done a "boot -v" . The below is actually from a
>>>=20
>>> captured serial console output. It is lightly edited. I
>>>=20
>>> have omitted nearly all loader output (and before).
>>=20
>> Thanks for sharing. Have you seen somewhere in output from UEFI =
(before
>>=20
>> the loader) that "DPAA2 Management Complex initialized"?
>>=20
>> Regards,
>>=20
>> Dmitry
>=20
> stable/13 dmesg: =
https://gist.github.com/agrajag9/bf6325d4f3321d8d0ee566fee767e0d3
>=20
> current dmesg: =
https://gist.github.com/6d07004fb3c6f0980d5e94627aaba060
>=20
> @dmitry - just ignore all the DPAA2 stuff for now. We don't support it =
at all :'(

And UEFI/ACPI currently appears to not give anyone anything
to support (yet).

> @mark - I was given a warning about i2c from SR's @jnettlet that it's =
possible to completely brick the system, although maybe they've solved =
that in the more recent SOC revisions?

FYI: Jon Nettleton recently reported:

QUOTE
okay I have replicated the the i2c bus issues.  Now I have
something I can fix
END QUOTE

> The IORT warnings might be related to SMMU. I'll have to dig up my =
notes, I did a ton of work with Greg on this months ago and it seems =
that's been swapped out of brain memory onto cold storage somewhere. =
Possibly here? =
https://gist.github.com/agrajag9/ff3c52c11469dccb70e17a11cb9be2a9

FYI: Jon Nettleton reported:

QUOTE
ACPI: IORT: Dropping unhandled type 6 This is ACPI RMR support
which was just released in March 2020 and only recently updated
as of 2 months ago.  I assume the other type 1 are the named
components for the network packet processor.  Those will need
to be fixed once driver support for the onboard networking is
added
END QUOTE

(Jon is not always clear about UEFI/ACPI vs. U-Boot vs.
Linux kernel or whatever combination is involved.)

> Feel free to use/critique my KERNCONF: =
https://gist.github.com/agrajag9/e3991573a274e59f58a0b520d2dcd5d2

I've never been one to spend effort cutting things from
the standard kernels. In a couple of cases, in dealing
with old PowerMac issues, I've forced something to be
in the kernel to avoid contexts where I could not load
the same but it was always needed for what I was doing.

> Fans: I've had mixed success here. Lots of people went for a full =
watercooling loop with =
https://www.alphacool.com/shop/gpu-water-cooler/amd-gpu/11088/alphacool-hf=
-14-smart-motion-universal-copper-edition?c=3D20587
>=20
> I'm just using =
https://www.radianheatsinks.com/product/inm37-5004-25pcu-2-6/ but others =
like http://www.enzotechnology.com/cnb_r1.htm
>=20
> Either way, welcome to the party! I've been daily-driving mine as a =
desktop for a few months, although I still can't get drm-kmod's amdgpu =
to load properly - perhaps you can?

The PCIe slot has an Optane, not video. Very few of
the machines I use have video engaged even rarely.
One FreeBSD machine has a lower end (and low power)
video card --but I do not use X11 or the like on it
generally. Similarly for built-in HDMI (when it is
used at all).

The same Optane can be used to boot the MACCHIATObin
Double Shot, where it was previously in use. I do
not have access to other aarch64 machines with a
PCIe slot. These two machines only have one such
slot.


=3D=3D=3D
Mark Millard
marklmi at yahoo.com
( dsl-only.net went
away in early 2018-Mar)




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C4D3B585-63B6-4C2A-B8DA-264073C6E2C2>