Date: Thu, 14 Feb 2002 20:23:45 +0100 From: "Harry Kroonen" <h.kroonen@brinktech.nl> To: freebsd-mobile@freebsd.org Subject: (newbie) pccard network install problem Message-ID: <3C6C1CD1.19363.CD052B@localhost>
next in thread | raw e-mail | index | archive | help
Hello,
I am trying to get my PCCARD network going on my Toshiba
Satellite Pro 4200, and I am not getting anywhere.
The card is a ‘sitecom’ (whatever that may be; I got it with
the laptop), Windows recognises it as a ‘Unex 10/100’ and
installs it (correctly) on IRQ5, 0x300, D0000, the
OEMsetup.inf calls it a NE2000.
On a standard FreeBSD4.4 install, the system hung. From the
4.4 release notes, I set “hw.pcic.intr_path”=”1” and that
looked a lot better. The card is recognised (correctly??), and
seems to be installed okay, but I can’t get any traffic
through it.
(BTW, I disabled the com&lpt ports in the BIOS, so IRQ3 as
automatically selected should be okay. I tried a few others,
that made no difference.)
I am using the standard /etc/defaults/pccard.conf, which shows
(among others; my card selects this config for itself):
card “PCMCIA” “FastEthernet”
config auto “ed” ? 0x30000
logstr “Telecom Device SuperSocket HPC100”
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
Below is all the info that might be usefull: dmesg, ifconfig,
pccardc dumpcis, rc.conf. What really strikes me pretty
strange is the ‘ed0’ that shows up once between all the ‘ed1’-
s.
Any ideas?
Thanks,
Harry Kroonen
===================
t4200# ifconfig <without card inserted>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8000<MULTICAST> mtu 1500
<INSERT CARD>
/kernel: pccard: card inserted, slot 0
pccardd[90]: Card “PCMCIA”(“FastEthernet”) [V] {1.0] matched
“PCMCIA” (“FastEthernet”) [(null)] [(null)]
pccardd[90]: Using I/O addr 0x300, size 32
pccardd[90]: Setting config reg at offs 0x3c0 to 0x47, Reset
time = 50 ms
pccardd[90]: Assigning I/O window 0, start 0x300, size 0x20
flags 0x5
pccardd[90]: Assign ed0, io 0x300-0x31f, mem 0x0, 0 bytes, irq
3, flags 30000
/kernel: ed1 at port 0x300-0x31f irq 3 slot 0 on pccard0
/kernel: ed1: address 01:02:00:ff:15:1d, type NE2000 (16bit)
pccardd[90]: ed1: Telecom Device SuperSocket HPC100 inserted
t4200# ifconfig <with card inserted>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8000<MULTICAST> mtu 1500
ed1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
1500
inet 192.168.1.99 netmask 0xffffff00 broadcast
192.168.1.255
inet6 fe80::60aa:f74c:475d:79d9%ed1 prefixlen 64 scopeid
0x5
ether 01:02:00:ff:15:1d
t4200# pccard dumpcis
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32
units
Tuple #2, code = 0x15 (Version 1 info), length = 29
000: 04 01 50 43 4d 43 49 41 00 46 61 73 74 45 74 68
010: 65 72 6e 65 74 00 56 00 31 2e 30 00 ff
Version = 4.1, Manuf = [PCMCIA], card vers =
[FastEthernet]
Addit. info = [V],[1.0]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 1b 02 02 02
PCMCIA ID = 0x21b, OEM ID = 0x202
Tuple #4, code = 0x1a (Configuration map), length = 5
000: 01 01 c0 03 63
Reg len = 2, config register addr = 0x3c0, last config =
0x1
Registers: XX---XX-
Tuple #5, code = 0x1b (Configuration entry), length = 11
000: c7 81 19 07 55 4d 5d 65 30 ff ff
Config index = 0x7(default)
Interface byte = 0x81 (I/O) wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Card decodes 5 address lines, full 8/16 Bit I/O
IRQ modes: Level
IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Tuple #6, code = 0x1b (Configuration entry), length = 7
000: 07 08 ca 60 00 03 1f
Config index = 0x7
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x300 block length
= 0x20
Tuple #7, code = 0x1b (Configuration entry), length = 7
000: 07 08 ca 60 20 03 1f
Config index = 0x7
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x320 block length
= 0x20
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 07 08 ca 60 40 03 1f
Config index = 0x7
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x340 block length
= 0x20
Tuple #9, code = 0x1b (Configuration entry), length = 7
000: 07 08 ca 60 60 03 1f
Config index = 0x7
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x360 block length
= 0x20
Tuple #10, code = 0x1b (Configuration entry), length = 7
000: 07 08 ca 60 00 02 1f
Config index = 0x7
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x200 block length
= 0x20
Tuple #11, code = 0x1b (Configuration entry), length = 7
000: 07 08 ca 60 20 02 1f
Config index = 0x7
Card decodes 10 address lines, limited 8/16 Bit I/O
I/O address # 1: block start = 0x220 block length
= 0x20
Tuple #12, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #13, code = 0x14 (No link), length = 0
Tuple #14, code = 0xff (Terminator), length = 0
2 slots found
t4200# cat /etc/rc.conf
hostname="t4200.brinktech.demon.nl"
kern_securelevel_enable="NO"
moused_enable="YES"
nfs_reserved_port_only="YES"
sendmail_enable="YES"
sshd_enable="YES"
usbd_enable="NO"
pccard_enable="YES"
pccard_ifconfig="inet 192.168.1.99 netmask 255.255.255.0"
t4200# dmesg
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (497.56-MHz 686-
class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR
,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 66977792 (65408K bytes)
avail memory = 60612608 (59192K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f0190
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on
motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device
1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c12 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at
device 5.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff80-
0xff9f irq 11 at device 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port
0xfe70-0xfe7f at device 5.3 on pci0
pci0: <unknown card> (vendor=0x1179, dev=0x0d01) at 9.0 irq 11
pcic0: <Toshiba ToPIC100 PCI-CardBus Bridge> at device 11.0 on
pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: Polling mode
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <Toshiba ToPIC100 PCI-CardBus Bridge> at device 11.1 on
pci0
pcic1: PCI Memory allocated: 0x44001000
pcic1: Polling mode
pccard1: <PC Card bus (classic)> on pcic1
pci0: <unknown card> (vendor=0x1073, dev=0x0010) at 12.0 irq
11
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6
drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on
isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-
0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master
UDMA33
acd0: CDROM <CD-224E-B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s4a
pccard: card inserted, slot 0
ed1 at port 0x300-0x31f irq 3 slot 0 on pccard0
ed1: address 01:02:00:ff:15:1d, type NE2000 (16 bit)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C6C1CD1.19363.CD052B>