Date: Fri, 15 Nov 2002 13:28:13 -0600 From: Narayanan Vidya-CVN065 <vidya@motorola.com> To: "'tlp@voila.fr'" <tlp@voila.fr> Cc: freebsd-mobile <freebsd-mobile@freebsd.org> Subject: RE: Cisco Aironet 350 Series Card Support Message-ID: <F82C2C97E60AB34B93F5B049B2A04B5602604CE3@il02exm05.corp.mot.com>
next in thread | raw e-mail | index | archive | help
Hi, Thanks for responding. The GENERIC file does have the line "device an" in it. I will write to Doug Ambrisko. Thanks, Vidya > -----Original Message----- > From: tlp@voila.fr [mailto:tlp@voila.fr] > Sent: Friday, November 15, 2002 9:55 AM > To: vidya > Cc: freebsd-mobile > Subject: RE: Cisco Aironet 350 Series Card Support > > > I'm not sure that pcmcia 350 serie is supported by the an > driver it should be, check if you find > device an > in GENERIC if it's not just add this line and recompile the kernel. > > actually there are problems between the an driver and the > mini-pci 350 serie, you should mybe ask doug ambrisko he > seems to know a lot about aironet series. > > good luck > > > > Hi, > > I am very new to FreeBSD. So, please pardon me if my > questions are too > > trivial or have been asked before. I am trying to use a > Cisco Aironet 350 > > Series WLAN client adapter on a desktop with a PCMCIA slot > running FreeBSD > > 4.4. I noticed that my pccard.conf file only had an entry > for the 340 series > > card. Based on suggestions from a FreeBSD site, I changed > the 340 to 350 in > > the /etc directory and now the machine finds a match for > the card and says > > "pccardd started" upon reboot. However, it does say "Failed > to allocate IRQ > > for Cisco Systems". How do I allocate an IRQ for the > device? Currently, my > > /sys/i386/conf/GENERIC file has an IRQ 0 entry for the > PCMCIA card. I > > figured this should be ok to use any available IRQ. > However, it certainly > > does not seem to work. > > > > Also, I am unable to execute any ifconfig or ancontrol > commands on the WLAN > > interface. No interface "anX" is listed. There is a pcic0 > that is listed > > against the PCMCIA support, but then that does not seem to > be an interface. > > When I try "ancontrol -i an0 -S", it says "ancontrol: > SIOCGAIRONET: Device > > not configured". > > > > I have the following lines included in the rc.conf file: > > > > pccard_enable="YES" > > pccard_mem="0xd0000" > > pccard_ifconfig="inet 10.10.10.59 netmask 255.255.255.0" > > > > Any ideas on how I might be able to get this to work? > > > > Thanks, > > Vidya > > > ------------------------------------------ > > Faites un voeu et puis Voila ! www.voila.fr > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F82C2C97E60AB34B93F5B049B2A04B5602604CE3>