Date: Sat, 23 Mar 2002 21:20:40 +0100 From: marius@alchemy.franken.de To: Jake Burkholder <jake@locore.ca> Cc: freebsd-sparc@freebsd.org Subject: DTK AXi Message-ID: <20020323212040.Y12572@newtrinity.default-network.net>
next in thread | raw e-mail | index | archive | help
--eAbsdosE1cNLO4uF
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Hi
Attached is a log when booting the sparc64-20020321.iso on a Ultra AXi
board from DTK. Those boards are very similiar to the SUN AXi boards and
have nearly the same layout but are missing the onboard sound.
One thing is strange, it only boots with that particular cdrom drive
and when the sector size is jumpered to 2048 bytes, with 512 bytes I
get the following:
Mounting root from cd9660:cd0a
cd0 at sym0 bus 0 target 6 lun 0
cd0: <COMPAQ CD-ROM CR-503BCQ 1.1i> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: cd present [315218 x 2048 byte records]
cd0c: raw partition size != slice size
cd0c: start 0, end 315217, size 315218
cd0cc: start 0, end 4294967295, size 0
cd0c: rejecting partition in BSD label: it isn't entirely within the slice
cd0c: start 0, end 315217, size 315218
cd0ca: start 0, end 1256319, size 1256320
cd0c: rejecting partition in BSD label: it isn't entirely within the slice
cd0cf: start 1256320, end 1260799, size 4480
Root mount failed: 22
With a scsi cdrom drive from NEC I always get this regardless of the set
sector size.
Thanks a lot for the great work!
Marius
--eAbsdosE1cNLO4uF
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dtk_boot.log"
SPARCengine(tm)Ultra(tm) AXi (UltraSPARC-IIi 302MHz), Sun Keyboard
OpenBoot 3.10.8 SME, 128 MB memory installed, Serial #24191.
Ethernet address 0:40:61:0:5e:7f, Host ID: 80005e7f.
Initializing Memory -
Drive not ready
Boot device: net File and args:
ok boot cdrom
Boot device: /pci@1f,0/pci@1/scsi@1/disk@6,0:f File and args:
>> FreeBSD/sparc64 boot block
Boot path: /pci@1f,0/pci@1/scsi@1/disk@6,0:f
Boot loader: /boot/loader
Console: OpenFirmware console
disk0 is /pci@1f,0/pci@1/scsi@1/disk@6
FreeBSD/sparc64 loader
bootpath="/pci@1f,0/pci@1/scsi@1/disk@6,0:f"
loaddev=disk0s0a:
> set boot_cdrom=yes
/boot/kernel/kernel data=0x1fff08+0xe44d8 syms=[0x8+0x3c240+0x8+0x2fced]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
nothing to autoload yet.
jumping to kernel entry at 0x80030000.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #5: Mon Mar 18 02:31:18 GMT 2002
root@u60.locore.ca:/usr/p4/sparc64/sys/sparc64/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0x80354000.
Timecounter "tick" frequency 301549109 Hz
cpu0: Sun Microsystems UltraSparc-IIi Processor (301.55 MHZ CPU)
nexus0: <OpenFirmware Nexus device>
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 128; PCI bus 0
DVMA map: c0000000 to dfffffff
pci0: <PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
sym0: <875> port 0x400-0x4ff mem 0x4000-0x4fff,0x2000-0x20ff irq 32 at device 1.0 on pci1
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x800-0x8ff mem 0x8000-0x8fff,0x6000-0x60ff irq 32 at device 1.1 on pci1
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pci1: <display, VGA> at device 2.0 (no driver attached)
pcib2: <APB PCI-PCI bridge> at device 1.1 on pci0
pci2: <PCI bus> on pcib2
ebus0: revision 0x01
ebus0: <PCI-EBus2 bridge> mem 0xf1000000-0xf17fffff,0xf0000000-0xf0ffffff at device 1.0 on pci2
ebus0: <auxio> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 (no driver attached)
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <se> addr 0x1400400000-0x140040007f irq 43 (no driver attached)
ebus0: <su_pnp> addr 0x14003803f8-0x14003803ff irq 41 (no driver attached)
ebus0: <su_pnp> addr 0x14003602f8-0x14003602ff irq 42 (no driver attached)
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x140030015c-0x140030015d,0x1400340278-0x1400340287 irq 34 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003203f0-0x14003203f7 irq 39 (no driver attached)
eeprom0: <EBus EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 80005e7f
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <beeper> addr 0x1400722000-0x1400722003 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x40008000-0x4000ffff irq 33 at device 1.1 on pci2
hme0: Ethernet address: 00:40:61:00:5e:7f
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <network, ethernet> at device 3.0 (no driver attached)
Waiting 2 seconds for SCSI devices to settle
(probe6:sym0:0:6:0): phase change 6-7 6@c0190598 resid=4.
Mounting root from cd9660:cd0a
cd0 at sym0 bus 0 target 6 lun 0
cd0: <COMPAQ CD-ROM CR-503BCQ 1.1i> Removable CD-ROM SCSI-2 device
cd0: 3.300MB/s transfers
cd0: cd present [1260872 x 512 byte records]
cd0c: raw partition size != slice size
cd0c: start 0, end 1260871, size 1260872
cd0cc: start 0, end 4294967295, size 0
cd0c: raw partition size != slice size
cd0c: start 0, end 1260871, size 1260872
cd0cc: start 0, end 4294967295, size 0
cd9660: RockRidge Extension
Invalid time in real time clock.
Check and reset the date immediately!
Entropy harvesting: interrupts ethernet point_to_point.
Automatic boot in progress...
--eAbsdosE1cNLO4uF--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-sparc" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020323212040.Y12572>