From owner-freebsd-questions Sun Jan 24 15:32:56 1999 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id PAA06246 for freebsd-questions-outgoing; Sun, 24 Jan 1999 15:32:56 -0800 (PST) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from lance.castle.net (lance.castle.net [199.173.5.4]) by hub.freebsd.org (8.8.8/8.8.8) with SMTP id PAA06239 for ; Sun, 24 Jan 1999 15:32:55 -0800 (PST) (envelope-from gkaplan@castle.net) Received: (qmail 6836 invoked from network); 24 Jan 1999 23:30:45 -0000 Received: from parsip-usr-54.intac.com (HELO castle.net) (199.173.8.123) by lance.castle.net with SMTP; 24 Jan 1999 23:30:45 -0000 Message-ID: <36ABACD9.494277FE@castle.net> Date: Sun, 24 Jan 1999 18:29:29 -0500 From: gkaplan X-Mailer: Mozilla 4.04 [en] (Win95; I) MIME-Version: 1.0 To: Mark Ovens , Patrick Gardella , freebsd-questions@FreeBSD.ORG Subject: Re: PnP modem installation References: <36A8A6BE.329AB17@castle.net> <36A8AAD7.80BC39BB@uk.radan.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG additional information: ( boot time:) Boot: -c FreeBSD 2.2.8-RELEASE #2 config> pnp 2 0 irq0 3 drq0 0 port0 0x2f8 config> ls device port irq drq iomem iosize unit flags enabled ... sio0 0x3f8 4 -1 0x0 0 0 0x0 yes sio1 0x2f8 3 -1 0x0 0 1 0x0 yes sio2 0x3e8 5 -1 0x0 0 2 0x0 no sio3 0x2e8 9 -1 0x0 0 3 0x0 no ... CSN LDN conf en irqs drqs other (PnP devices) 1 0 os y 3 0 0 0 port 0x2f8 2 0 os y 3 0 0 4 port 0x2f8 config> quit #dmesg | more ... Probing for PnP devices: CSN 1 Vendor ID YMH0030 [0x3000a865] Serial 0x80860001 PnP: override config for CSN 1 LDN 0 vend-id 0x3000a865 CSN 2 Vendor ID USR2090[0x90207256] Serial 0xffff9f80 PnP: override config for CSN 2 LDN 0 vend-id 0x9027256 sio4: type 16550A sio4: siopnp sn 0xffff9f80 at 0x2f8 irq 3drq -1 flags 0x0 id 21 Probing for devices on the ISA bus: ... sio0: at 0x3f8-0x3ff irq 4 on isa sio0 type 16650A sio1 at 0x2f8-0x2ff irq 3 on isa sio1 type 16550A ------------ changed /etc/remote to include the line usr:dv=dev/cuaa1:br#115200:pa=none: ------------ # tip usr connected ~. # tip usr 4044224 # a legitimate phone number tip: unknown host tip0 ____________________________________ 1.) There is still an inconstancy between my parameter setting and my hardware assignment. 2.) When that is cleared up I would first try to communicate with my isp using a shell account and then a graphical browser shell ( telnet, or minicom ) graphical browser (? navigator) ================================ Patrick Gardella wrote: >I'm not a pnp guru, but I'll try to help. >dmesg is reporting your modem on CSN 2. >Your pnp command from below is trying to configure CSN 1 (hence pnp 1 0) > >The pnp works like this: >pnp CSN LDN ... > >So I would suggest the following (in order): >1. if your BIOS supports PnP, try the command "pnp 2 0 enable bios" >2. if that doesn't work, try "pnp 2 0 enable os irq0 3 drq0 0 port0 >0x2f8" > >Also list the devices when you boot using -c. It may make something clear to >you (I once had port1 set instead of port0). > >No need to modify the sio.c. >Patrick Mark Ovens wrote: > gkaplan wrote: > > > > With kernel 2.2.8 , following suggestions in FAQ: " internal PnP > > modem can't find" I have the following result: > > -------- from dmsage output: > > Probe PnP devices > > CSN 1 Vendor ID YMH0030 [0x3000a865] Serial 0x80860001 > > CSN 2 Vendor ID USR2090 [0x90207256] Serial 0xffff9f80 > > CSN 2 is disabled > > ---------- > > sio1 configured irq 3 not in bitmap of probed irqs 0 > > sio1 not found at 0x2f8 > > ------------ The irq and port address agrees with values reported from > > win95 i.e., > > com2 port 2f8 ns16550an > > Identifier USR2090ISAPNP\USR2090 > > ------------ > > I have edited the table siopnp_ids[] in /sys/i386/isa/sio.c to > > include the line : > > { 0x9020756, "USR2090"}, . > > and then rebuilt the kernel. > > ------------ > > The FAQ also mentions a pnp command:" you may have to manually > > configure the PnP device using the 'pnp' command at boot time, with a > > command like : > > 'pnp 1 0 enable os irq0 3 drq0 0 port0 0x2f8' > ^^^ > I think you will find that this should be ``2 1'' as its Card Select > Number is 2 and therefore it's Logical Device Number is 1. > > > ------- I have tried this, with no noticeable effect. > > ------- I was told by the modem manufacturer that this modem is an oem > > product and the the computer's oem is the responsible party of the > > installation and proper working of the modem. > > ------- I was told by the computer oem that the modem in question is not > > a winmodem. > > > > ANY SUGGESTIONS? thank you. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message