Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 18 Oct 2013 10:15:30 +0200
From:      Berislav Purgar <bpurgar@gmail.com>
To:        Olivier Houchard <cognet@freebsd.org>
Cc:        "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org>
Subject:   Re: AVILA kernel
Message-ID:  <CAAUsrB5GzsWsxJcVX7FUxU4-ac66d7jDRotwJkt_gaHK5BFEGg@mail.gmail.com>
In-Reply-To: <20131017221444.GA54669@freebsd.org>
References:  <CAAUsrB5UOq%2BSJ0SW8NOiKwxR0%2BJyfzJhakdkuAvyQMi6Gv5CNw@mail.gmail.com> <CAAUsrB4vRwP2HDOoWLohiokSudhXPV9N6H_hrE=FWdMhoEUtdQ@mail.gmail.com> <58DBFC39-806F-48AF-BB81-7FFF1931BF5D@bsdimp.com> <CAAUsrB7C6cvih45fE-gfcNiwzAjDLSwxo4zS8-o%2BqWahtjDHGg@mail.gmail.com> <20131017221444.GA54669@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Oct 18, 2013 at 12:14 AM, Olivier Houchard <cognet@freebsd.org>wrote:

> On Thu, Oct 17, 2013 at 11:51:50PM +0200, Berislav Purgar wrote:
> > > >> Hello ..
> > > >>
> > > >> finally i got gatewroks GW2345 board but now i got stuck on loading
> > > >> kernel. it stops on copyright message:
> > > >>
> > > >> RedBoot> ip -h 10.42.1.1 -l 10.42.1.11
> > > >> IP: 10.42.1.11/255.255.255.0, Gateway: 0.0.0.0
> > > >> Default server: 10.42.1.1
> > > >> RedBoot> load -b 0x200000 kernel
> > > >> Using default protocol (TFTP)
> > > >> Address offset = 0x40000000
> > > >> Entry point: 0x00200100, address range: 0x00200000-0x007817c8
> > > >> RedBoot> go
> > > >> KDB: debugger backends: ddb
> > > >> KDB: current backend: ddb
> > > >> Copyright (c) 1992-2013 The FreeBSD Project.
> > > >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
> > > >>        The Regents of the University of California. All rights
> reserved.
> > > >> FreeBSD is a registered trademark of The FreeBSD Foundation.
> > > >> FreeBSD 11.0-CURRENT #0 r256593M: Wed Oct 16 19:14:51 CEST 2013
> > > >>    root@brzi:/usr/obj/arm.armeb/usr/src/sys/AVILA arm
> > > >> gcc version 4.2.1 20070831 patched [FreeBSD]
> > > >>
> > > >> on stock AVILA conf. file i got panic :
> > > >>
> > > >> RedBoot> ip
> > > >> IP: 192.168.3.2/255.255.255.0, Gateway: 0.0.0.0
> > > >> Default server: 192.168.3.1
> > > >> RedBoot> ip -h 10.42.1.1 -l 10.42.1.11
> > > >> IP: 10.42.1.11/255.255.255.0, Gateway: 0.0.0.0
> > > >> Default server: 10.42.1.1
> > > >> RedBoot> load -b 0x200000 kernel
> > > >> Using default protocol (TFTP)
> > > >> Address offset = 0x40000000
> > > >> Entry point: 0x00200100, address range: 0x00200000-0x006a9808
> > > >> RedBoot> go
> > > >> panic: mtx_lock() of spin mutex pmap @
> /usr/src/sys/arm/arm/pmap.c:3676
> > > >> Uptime: 1s
> > > >>
> > > >>
> > > >> tnx
> > > >>
> > > >
> > > >
> > > > any ideas ?
>
> Hi Berislav,
>
> I won't be able to test things on AVILA before at least next week, but I
> just
> committed a change as rev 256712 that may, or may not, help with your
> issue.
> Can you test it and see if it helps ?
>
> Thanks !
>
> Olivier
>

No luck .. same problem ..

RedBoot> ip -h 10.42.1.1 -l
10.42.1.11
IP: 10.42.1.11/255.255.255.0, Gateway:
0.0.0.0
Default server:
10.42.1.1
RedBoot> load -b 0x200000
kernel
Using default protocol
(TFTP)
Address offset =
0x40000000
Entry point: 0x00200100, address range:
0x00200000-0x006b4cc8
RedBoot>
go
panic: mtx_lock() of spin mutex pmap @
/usr/src/sys/arm/arm/pmap.c:3676
Uptime: 1s

i will use 9.1 till HEAD is fixed ..

Default server:
10.42.1.1
RedBoot> load -b 0x200000
kernel
Using default protocol
(TFTP)
Address offset =
0x40000000
Entry point: 0x00200100, address range:
0x00200000-0x006cbc68
RedBoot>
go
KDB: debugger backends:
ddb
KDB: current backend:
ddb
Copyright (c) 1992-2012 The FreeBSD
Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
        The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD
Foundation.
FreeBSD 9.1-RELEASE #0: Fri Oct 18 00:04:33 CEST
2013
    root@gateworks:/usr/obj/arm.armeb/usr/src/sys/AVILA
arm
CPU: IXP425 533MHz rev 1 (ARMv5TE) (XScale
core)
  DC enabled IC enabled WB enabled LABT branch prediction
enabled
  32KB/32B 32-way Instruction
cache
  32KB/32B 32-way write-back-locking Data
cache
real memory  = 67108864 (64
MB)
avail memory = 57380864 (54
MB)
ixp0: <Intel IXP4XX> on
motherboard
ixp0:
37fff<RCOMP,USB,HASH,AES,DES,HDLC,AAL,HSS,UTOPIA,ETH0,ETH1,PCI>
pcib0: <IXP4XX PCI Bus> on
ixp0
pci0: <PCI bus> on
pcib0
ixpclk0: <IXP4XX Timer> on
ixp0
ixpiic0: <IXP4XX GPIO-Based I2C Interface> on
ixp0
iicbb0: <I2C bit-banging driver> on
ixpiic0
iicbus0: <Philips I2C bus> on iicbb0
master-only
iic0: <I2C generic I/O> on
iicbus0
ad74180: <Analog Devices AD7418 ADC> at addr 0x50 on
iicbus0
ds1672_rtc0: <Dallas Semiconductor DS1672 RTC> at addr 0xd0 on
iicbus0
ixpwdog0: <IXP4XX Watchdog Timer> on
ixp0
uart0: <Non-standard ns8250 class UART with FIFOs> on
ixp0
uart0: console
(115200,n,8,1)
uart1: <Non-standard ns8250 class UART with FIFOs> on
ixp0
ixpqmgr0: <IXP4XX Q-Manager> on
ixp0
npe0: <IXP NPE-B> on
ixp0
npe0: MAC at
0xc8009000
npe0: MII at
0xc8009000
npe0: load fw image IXP425.NPE-B Func 0x2 Rev
2.1
npe0: attaching PHYs
failed
npe0: cannot activate
npe
device_attach: npe0 attach returned
6
npe1: <IXP NPE-C> on
ixp0
npe1: MAC at
0xc800a000
npe1: MII at
0xc8009000
npe1: load fw image IXP425.NPE-C Func 0x5 Rev
2.1
miibus0: <MII bus> on npe1


tnx anyway :)



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAUsrB5GzsWsxJcVX7FUxU4-ac66d7jDRotwJkt_gaHK5BFEGg>