Date: Sun, 11 Mar 2001 17:59:51 -0500 (EST) From: Andy Akins <andyakins@earthlink.net> To: freebsd-questions@freebsd.org Subject: Startup messages question Message-ID: <380547804.984351591312.JavaMail.root@web623-wrb.mail.com>
next in thread | raw e-mail | index | archive | help
I'll start this out by syaing that I am a freebsd newbie.
I'm running the 4.2 FreeBSD that I purchased in the FreeBSD Toolkit. I have cvsup'ed my source tree following the STABLE branch, and rebuilt my kernel with parameters appropriate to my hardware. Everything runs fine.
Ever since I rebuilt and installed my custom kernal, I get some config> errors at the beginning talking about missing devices. Obviously these are devices that GENERIC had that my new one does not - how do I get the boot process to stop loading these non-existant drivers?
Also - the boot process spends a lot of time timing out on the ata master/slaves - because I have nothing hooked up to then (except one dvd on ata0 master.).
Below is a cat from dmesg.
If anyone can help me out, or point me to the right docs (I can't find anything about this in Lehey's book). I'd appreciate it.
Thanks!
Andy Akins
andyakins@earthlink.net
=============================================================
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-BETA #1: Sun Mar 11 11:29:29 CST 2001
root@:/usr/src/sys/compile/SULIEMAN
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 958541125 Hz
CPU: AMD Athlon(tm) Processor (958.54-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268353536 (262064K bytes)
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> en pcic0
No such device: pcic0
Invalid command or syntax. Type `?' for help.
config> po pcic0 0x3e0
No such device: pcic0
Invalid command or syntax. Type `?' for help.
config> ir pcic0 0
No such device: pcic0
Invalid command or syntax. Type `?' for help.
config> iom pcic0 0xd0000
No such device: pcic0
Invalid command or syntax. Type `?' for help.
config> f pcic0 0
No such device: pcic0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 257896448 (251852K bytes)
Preloaded elf kernel "kernel" at 0xc034e000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc034e09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <ATI model 5144 graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 9 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
ahc0: <Adaptec 2930 Ultra2 SCSI adapter> port 0x9400-0x94ff mem 0xd6800000-0xd6800fff irq 9 at device 9.0 on pci0
aic7890/91: Wide Channel A, SCSI Id=7, 32/255 SCBs
pci0: <unknown card> (vendor=0x1105, dev=0x8300) at 10.0 irq 5
pcm0: <Creative EMU10K1> port 0x9000-0x901f irq 9 at device 13.0 on pci0
atapci1: <Promise ATA100 controller> port 0x7000-0x703f,0x7400-0x7403,0x7800-0x7807,0x8000-0x8003,0x8400-0x8407 mem 0xd5800000-0xd581ffff irq 10 at device 17.0 on pci0
ata2: at 0x8400 on atapci1
ata3: at 0x7800 on atapci1
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 720C> SCP,VLINK
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ata2-slave: ata_command: timeout waiting for intr
ata2-slave: identify failed
ata2-master: ata_command: timeout waiting for intr
ata2-master: identify failed
ata3-slave: ata_command: timeout waiting for intr
ata3-slave: identify failed
ata3-master: ata_command: timeout waiting for intr
ata3-master: identify failed
acd0: DVD-ROM <CREATIVEDVD1240E> at ata0-master using UDMA33
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s2a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST150176LW 0002> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
da0: 47702MB (97693755 512 byte sectors: 255H 63S/T 6081C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?380547804.984351591312.JavaMail.root>