ller> mem 0x40000000-0x400000ff on simpleb=
us0
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 39 on
simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 7,8 on
simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
gpiobus1: <GPIO bus> on gpio1
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 6 on
simplebus0
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq
23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38 on simplebus0
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on
simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 9 on simplebu=
s0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 11 on
simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 19 on
simplebus0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem
0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 21,22 on simplebus0
usbus1 on bcm283x_dwcotg0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00=
a023
on simplebus0
bcmrng0: <Broadcom BCM2835/BCM2838 RNG> mem 0x7e104000-0x7e10400f irq 40 on
simplebus0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq =
48
on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
gpioc1: <GPIO controller> on gpio1
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 15.0.
VT: Replacing driver "efifb" with new "fb".
fb0: 656x416(656x416@0,0) 32bpp
fb0: fbswap: 1, pitch 2624, base 0x3eaf0000, screen_size 1091584
pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led0> failed to map pin
armv8crypto0: CPU lacks AES instructions
Timecounters tick every 1.000 msec
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <DWCOTG OTG Root HUB> at usbus1
uhub0 on usbus1
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmcsd0: 16GB <SDHC SC16G 8.0 SN C5E049F0 MFG 11/2017 by 3 SD> at mmc0
50.0MHz/4bit/65535-block
bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
CPU  0: ARM Cortex-A53 r0p4 affinity:  0
                   Cache Type =3D <64 byte D-cacheline,64 byte I-cacheline,=
VIPT
ICache,64 byte ERG,64 byte CWG>
 Instruction Set Attributes 0 =3D <CRC32>
 Instruction Set Attributes 1 =3D <>
 Instruction Set Attributes 2 =3D <>
         Processor Features 0 =3D <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 =3D <>
      Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,=
1TB
PA>
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
      Memory Model Features 1 =3D <8bit VMID>
      Memory Model Features 2 =3D <32bit CCIDX,48bit VA>
             Debug Features 0 =3D <DoubleLock,2 CTX BKPTs,4 Watchpoints,6
Breakpoints,PMUv3,Debugv8>
             Debug Features 1 =3D <>
         Auxiliary Features 0 =3D <>
         Auxiliary Features 1 =3D <>
AArch32 Instruction Set Attributes 5 =3D <CRC32,SEVL>
AArch32 Media and VFP Features 0 =3D <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP
VFPv3+v4,AdvSIMD>
AArch32 Media and VFP Features 1 =3D <SIMDFMAC,FPHP DP Conv,SIMDHP SP
Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
CPU  1: ARM Cortex-A53 r0p4 affinity:  1
CPU  2: ARM Cortex-A53 r0p4 affinity:  2
CPU  3: ARM Cortex-A53 r0p4 affinity:  3
Release APs...done
TCP_ratelimit: Is now initialized
uhub0: 1 port with 1 removable, self powered
ugen1.2: <vendor 0x0424 product 0x9514> at usbus1
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on
usbus1
uhub1: MTT enabled
Root mount waiting for: usbus1
uhub1: 5 ports with 4 removable, self powered
ugen1.3: <vendor 0x0424 product 0xec00> at usbus1
smsc0 on uhub1
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus1
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0
smscphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:36:17:96
Root mount waiting for: usbus1
Root mount waiting for: usbus1
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device ven=
dor
0x13fe USB DISK 2.0 (0x13fe:0x3600)
usb_msc_auto_quirk: UQ_MSC_NO_TEST_UNIT_READY set for USB mass storage devi=
ce
vendor 0x13fe USB DISK 2.0 (0x13fe:0x3600)
usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device
vendor 0x13fe USB DISK 2.0 (0x13fe:0x3600)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device ve=
ndor
0x13fe USB DISK 2.0 (0x13fe:0x3600)
Root mount waiting for: usbus1
ugen1.4: <vendor 0x13fe USB DISK 2.0> at usbus1
umass0 on uhub1
umass0: <vendor 0x13fe USB DISK 2.0, class 0/0, rev 2.00/1.10, addr 4> on
usbus1
umass0:  SCSI over Bulk-Only; quirks =3D 0xc101
umass0:0:0: Attached to scbus0
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 =
00
00=20
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid
command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: < USB DISK 2.0 PMAP> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 079A0A009E087E2B
da0: 40.000MB/s transfers
da0: 7640MB (15646720 512 byte sectors)
da0: quirks=3D0x3<NO_SYNC_CACHE,NO_6_BYTE>
Warning: no time-of-day clock registered, system time will not be set
accurately
Dual Console: Serial Primary, Video Secondary
Setting hostuuid: 30303030-3030-3030-6238-333631373936.
Setting hostid: 0x4476d08b.
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 1687780 free (6340 frags, 210180 blocks, 0.2%
fragmentation)
Mounting local filesystems:.
Setting up harvesting:
[CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,K=
EYBOARD,ATTACH,CACHED
Feeding entropy: .
Setting hostname: *********.local.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
/usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/mysql
/usr/local/lib/mysql/plugin /usr/local/lib/perl5/5.36/mach/CORE
32-bit compatibility ldconfig path: /usr/lib32
ue0: link state changed to UP
lo0: link state changed to UP
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
ue0: link state changed to UP
Starting Network: lo0 ue0.
lo0: flags=3D1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 1=
6384
        options=3D680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        groups: lo
        nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=3D1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metri=
c 0
mtu 1500
        options=3D80009<RXCSUM,VLAN_MTU,LINKSTATE>
        ether b8:27:eb:36:17:96
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        nd6 options=3D29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Starting dhclient.

--=20
You are receiving this mail because:
You are the assignee for the bug.=