From owner-freebsd-questions Sat Sep 5 04:22:06 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id EAA17048 for freebsd-questions-outgoing; Sat, 5 Sep 1998 04:22:06 -0700 (PDT) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from fortress.elkatel.ru (elkatel.ru [195.18.32.3]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id EAA17042 for ; Sat, 5 Sep 1998 04:22:03 -0700 (PDT) (envelope-from serega@elkatel.ru) Received: from ondorm.elkatel.ru (ra4-p27.dialup.elkatel.ru [195.18.34.27]) by fortress.elkatel.ru (8.8.8/8.8.8) with SMTP id PAA23405 for ; Sat, 5 Sep 1998 15:20:48 +0400 From: "Sergei M.Klimkin" To: Subject: a ppp -question Date: Sat, 5 Sep 1998 15:21:12 +0400 Message-ID: <01bdd8bf$4b0f77e0$0100a8c0@ondorm.elkatel.ru> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0004_01BDD8E0.D22117E0" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.71.1712.3 X-MimeOLE: Produced By Microsoft MimeOLE V4.71.1712.3 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a multi-part message in MIME format. ------=_NextPart_000_0004_01BDD8E0.D22117E0 Content-Type: text/plain; charset="koi8-r" Content-Transfer-Encoding: quoted-printable Hi there! I've got some trouble with ppp I did all setting as you discribe in Handbook! comp# ppp ppp on comp>dial elkatel -that is my ISP dial ok login ok ppp on comp>packet mode But nothing work! In my log file I foung only one error! Following lines taked after login ok! tun0: Connect: annex:=20 tun0: Chat: Sending: ppp^M=20 tun0: IPCP: Using trigger address 0.0.0.0=20 tun0: LCP: State change Initial --> Closed=20 tun0: LCP: State change Closed --> Stopped=20 tun0: LCP: Received Configure Request (1) state =3D Stopped (3)=20 tun0: LCP: ACCMAP[6] 0x00000000=20 tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)=20 tun0: LCP: MAGICNUM[6] 0x0ea7494b=20 tun0: LCP: PROTOCOMP[2]=20 tun0: LCP: ACFCOMP[2]=20 tun0: LCP: LcpSendConfigReq=20 tun0: LCP: ACFCOMP[2]=20 tun0: LCP: PROTOCOMP[2]=20 tun0: LCP: ACCMAP[6] 0x00000000=20 tun0: LCP: MRU[4] 1500=20 tun0: LCP: MAGICNUM[6] 0x34eae06e=20 tun0: LCP: SendConfigAck(Stopped)=20 tun0: LCP: ACCMAP[6] 0x00000000=20 tun0: LCP: AUTHPROTO[4] 0xc023 (PAP)=20 tun0: LCP: MAGICNUM[6] 0x0ea7494b=20 tun0: LCP: PROTOCOMP[2]=20 tun0: LCP: ACFCOMP[2]=20 tun0: LCP: State change Stopped --> Ack-Sent=20 tun0: LCP: Received Configure Ack (1) state =3D Ack-Sent (8)=20 tun0: LCP: State change Ack-Sent --> Opened=20 tun0: LCP: LcpLayerUp=20 tun0: Phase: NewPhase: Authenticate=20 tun0: Phase: his =3D PAP, mine =3D none=20 tun0: Phase: PAP: serega=20 tun0: Phase: PapInput: ACK=20 tun0: Phase: Received PAP_ACK ()=20 tun0: Phase: NewPhase: Network=20 tun0: IPCP: State change Initial --> Closed=20 tun0: IPCP: IPCP Up event!!=20 tun0: IPCP: IpcpSendConfigReq=20 tun0: IPCP: IPADDR[6] 0.0.0.0=20 tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compres=20 tun0: IPCP: State change Closed --> Req-Sent=20 tun0: CCP: State change Initial --> Closed=20 tun0: CCP: CCP Up event!!=20 tun0: CCP: CcpSendConfigReq=20 tun0: CCP: DEFLATE[4] win 15=20 tun0: CCP: PRED1[2]=20 tun0: CCP: State change Closed --> Req-Sent=20 tun0: IPCP: Received Configure Request (3) state =3D Req-Sent (6)=20 tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression=20 tun0: IPCP: IPADDR[6] 195.18.32.4=20 tun0: IPCP: SendConfigAck(Req-Sent)=20 tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression=20 tun0: IPCP: IPADDR[6] 195.18.32.4=20 tun0: IPCP: State change Req-Sent --> Ack-Sent=20 tun0: Phase: Unknown protocol 0x802b (Novell IPX Control Protocol)=20 tun0: LCP: LcpSendProtoRej=20 tun0: IPCP: Received Configure Nak (1) state =3D Ack-Sent (8)=20 tun0: IPCP: IPADDR[6] 195.18.34.23=20 tun0: IPCP: IPADDR[6] changing address: 0.0.0.0 --> 195.18.34.23=20 tun0: IPCP: IpcpSendConfigReq=20 tun0: IPCP: IPADDR[6] 195.18.34.23=20 tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compres=20 tun0: CCP: Received Configure Reject (1) state =3D Req-Sent (6)=20 tun0: CCP: RecvConfigRej.=20 tun0: CCP: DEFLATE[4]=20 tun0: CCP: CcpSendConfigReq=20 tun0: CCP: PRED1[2]=20 tun0: IPCP: Received Configure Ack (2) state =3D Ack-Sent (8)=20 tun0: IPCP: State change Ack-Sent --> Opened=20 tun0: IPCP: IpcpLayerUp(9).=20 tun0: IPCP: myaddr =3D 195.18.34.23 hisaddr =3D 195.18.32.4=20 tun0: LCP: OsLinkup: 195.18.32.4=20 tun0: Command: elkatel: delete ALL=20 tun0: Command: elkatel: add 0 0 HISADDR=20 tun0: CCP: Received Configure Ack (2) state =3D Req-Sent (6)=20 tun0: CCP: State change Req-Sent --> Ack-Rcvd=20 tun0: CCP: Received Terminate Request (5) state =3D Ack-Rcvd (7)=20 tun0: CCP: CcpSendTerminateAck=20 tun0: CCP: State change Ack-Rcvd --> Req-Sent=20 tun0: Phase: HDLC errors -> FCS: 16 ADDR: 0 COMD: 0 PROTO: 1 -What's = that mean???? tun0: Phase: HDLC errors -> FCS: 5 ADDR: 0 COMD: 0 PROTO: 0 -What's = that mean???? tun0: Phase: HDLC errors -> FCS: 15 ADDR: 0 COMD: 0 PROTO: 0 -What's = that mean???? tun0: Phase: Idle timer expired.=20 tun0: Phase: NewPhase: Terminate=20 tun0: IPCP: OsLinkdown: 195.18.32.4=20 tun0: IPCP: IpcpLayerDown.=20 tun0: IPCP: Connect time: 237 secs: 0 octets in, 1596 octets out=20 tun0: IPCP: total 6 bytes/sec=20 tun0: IPCP: State change Opened --> Starting=20 tun0: CCP: State change Req-Sent --> Starting=20 tun0: Command: MYADDR: !bg /usr/X11R6/bin/auplay /etc/ppp/linkdown.au=20 tun0: LCP: LcpLayerDown=20 tun0: LCP: SendTerminateReq.=20 tun0: LCP: State change Opened --> Closing=20 tun0: LCP: Received Terminate Ack (2) state =3D Closing (4)=20 tun0: LCP: State change Closing --> Closed=20 tun0: LCP: LcpLayerFinish=20 tun0: Phase: Modem: Connect time: 308 secs: 9310 octets in, 2023 octets = out=20 tun0: Phase: total 36 bytes/sec=20 tun0: Phase: NewPhase: Dead=20 tun0: IPCP: Using trigger address 0.0.0.0=20 tun0: Command: quit=20 tun0: Phase: PPP Terminated (normal). Help me in that possible! Thanks ------=_NextPart_000_0004_01BDD8E0.D22117E0 Content-Type: text/html; charset="koi8-r" Content-Transfer-Encoding: quoted-printable
Hi there!
I've got some trouble with ppp
I did all setting as you discribe in=20 Handbook! 
 
comp# ppp
ppp on comp>dial=20 elkatel      -that is my ISP 
dial = ok
login ok
ppp on comp>packet mode 
But nothing=20 work!
 
In my log file I foung only one error!
Following = lines taked after=20 login ok!
 
tun0: Connect: annex:
tun0: = Chat: Sending:=20 ppp^M
tun0: IPCP: Using trigger address 0.0.0.0
tun0: LCP: State = change=20 Initial --> Closed
tun0: LCP: State change Closed --> Stopped=20
tun0: LCP: Received Configure Request (1) state =3D Stopped (3) =
tun0:=20 LCP:  ACCMAP[6] 0x00000000
tun0: LCP:  AUTHPROTO[4] 0xc023 = (PAP)=20
tun0: LCP:  MAGICNUM[6] 0x0ea7494b
tun0: LCP:  = PROTOCOMP[2]=20
tun0: LCP:  ACFCOMP[2]
tun0: LCP: LcpSendConfigReq =
tun0:=20 LCP:  ACFCOMP[2]
tun0: LCP:  PROTOCOMP[2]
tun0: = LCP: =20 ACCMAP[6] 0x00000000
tun0: LCP:  MRU[4] 1500
tun0: = LCP: =20 MAGICNUM[6] 0x34eae06e
tun0: LCP: SendConfigAck(Stopped)
tun0:=20 LCP:  ACCMAP[6] 0x00000000
tun0: LCP:  AUTHPROTO[4] 0xc023 = (PAP)=20
tun0: LCP:  MAGICNUM[6] 0x0ea7494b
tun0: LCP:  = PROTOCOMP[2]=20
tun0: LCP:  ACFCOMP[2]
tun0: LCP: State change Stopped = -->=20 Ack-Sent
tun0: LCP: Received Configure Ack (1) state =3D Ack-Sent = (8)=20
tun0: LCP: State change Ack-Sent --> Opened
tun0: LCP: = LcpLayerUp=20
tun0: Phase: NewPhase: Authenticate
tun0: Phase:  his =3D = PAP, mine =3D=20 none
tun0: Phase: PAP: serega
tun0: Phase: PapInput: ACK =
tun0:=20 Phase: Received PAP_ACK ()
tun0: Phase: NewPhase: Network
tun0: = IPCP:=20 State change Initial --> Closed
tun0: IPCP: IPCP Up event!! =
tun0:=20 IPCP: IpcpSendConfigReq
tun0: IPCP:  IPADDR[6] 0.0.0.0 =
tun0:=20 IPCP:  COMPPROTO[6] 16 VJ slots with slot compres
tun0: IPCP: = State=20 change Closed --> Req-Sent
tun0: CCP: State change Initial --> = Closed=20
tun0: CCP: CCP Up event!!
tun0: CCP: CcpSendConfigReq
tun0:=20 CCP:  DEFLATE[4] win 15
tun0: CCP:  PRED1[2]
tun0: = CCP: State=20 change Closed --> Req-Sent
tun0: IPCP: Received Configure Request = (3)=20 state =3D Req-Sent (6)
tun0: IPCP:  COMPPROTO[6]  16 VJ = slots with=20 slot compression
tun0: IPCP:  IPADDR[6]  195.18.32.4 =
tun0:=20 IPCP: SendConfigAck(Req-Sent)
tun0: IPCP:  COMPPROTO[6]  = 16 VJ=20 slots with slot compression
tun0: IPCP:  IPADDR[6]  = 195.18.32.4=20
tun0: IPCP: State change Req-Sent --> Ack-Sent
tun0: Phase: = Unknown=20 protocol 0x802b (Novell IPX Control Protocol)
tun0: LCP: = LcpSendProtoRej=20
tun0: IPCP: Received Configure Nak (1) state =3D Ack-Sent (8) =
tun0:=20 IPCP:  IPADDR[6]  195.18.34.23
tun0: IPCP:  = IPADDR[6] =20 changing address: 0.0.0.0  --> 195.18.34.23
tun0: IPCP:=20 IpcpSendConfigReq
tun0: IPCP:  IPADDR[6] 195.18.34.23
tun0: = IPCP:  COMPPROTO[6] 16 VJ slots with slot compres
tun0: CCP: = Received=20 Configure Reject (1) state =3D Req-Sent (6)
tun0: CCP: = RecvConfigRej.=20
tun0: CCP:  DEFLATE[4]
tun0: CCP: CcpSendConfigReq =
tun0:=20 CCP:  PRED1[2]
tun0: IPCP: Received Configure Ack (2) state =3D = Ack-Sent=20 (8)
tun0: IPCP: State change Ack-Sent --> Opened
tun0: IPCP:=20 IpcpLayerUp(9).
tun0: IPCP:  myaddr =3D 195.18.34.23  = hisaddr =3D=20 195.18.32.4
tun0: LCP: OsLinkup: 195.18.32.4
tun0: Command: = elkatel:=20 delete ALL
tun0: Command: elkatel: add 0 0 HISADDR
tun0: CCP: = Received=20 Configure Ack (2) state =3D Req-Sent (6)
tun0: CCP: State change = Req-Sent=20 --> Ack-Rcvd
tun0: CCP: Received Terminate Request (5) state =3D = Ack-Rcvd=20 (7)
tun0: CCP: CcpSendTerminateAck
tun0: CCP: State change = Ack-Rcvd=20 --> Req-Sent
tun0: Phase: HDLC errors -> FCS: 16 ADDR: 0 COMD: = 0=20 PROTO: 1  -What's that mean????
tun0: Phase: HDLC errors -> = FCS: 5=20 ADDR: 0 COMD: 0 PROTO: 0    -What's that = mean????
tun0: Phase:=20 HDLC errors -> FCS: 15 ADDR: 0 COMD: 0 PROTO: 0   -What's = that=20 mean????
tun0: Phase: Idle timer expired.
tun0: Phase: NewPhase:=20 Terminate
tun0: IPCP: OsLinkdown: 195.18.32.4
tun0: IPCP: = IpcpLayerDown.=20
tun0: IPCP: Connect time: 237 secs: 0 octets in, 1596 octets out =
tun0:=20 IPCP:  total 6 bytes/sec
tun0: IPCP: State change Opened --> = Starting
tun0: CCP: State change Req-Sent --> Starting
tun0: = Command:=20 MYADDR: !bg /usr/X11R6/bin/auplay /etc/ppp/linkdown.au
tun0: LCP:=20 LcpLayerDown
tun0: LCP: SendTerminateReq.
tun0: LCP: State = change Opened=20 --> Closing
tun0: LCP: Received Terminate Ack (2) state =3D = Closing (4)=20
tun0: LCP: State change Closing --> Closed
tun0: LCP: = LcpLayerFinish=20
tun0: Phase: Modem: Connect time: 308 secs: 9310 octets in, 2023 = octets out=20
tun0: Phase:  total 36 bytes/sec
tun0: Phase: NewPhase: = Dead=20
tun0: IPCP: Using trigger address 0.0.0.0
tun0: Command: quit =
tun0:=20 Phase: PPP Terminated (normal). 
 
Help me in that = possible!
Thanks 
 
------=_NextPart_000_0004_01BDD8E0.D22117E0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message