Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 25 Jul 2018 15:14:29 -0500
From:      Kyle Evans <kevans@freebsd.org>
To:        Greg V <greg@unrelenting.technology>
Cc:        "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org>
Subject:   Re: Allwinner dtb overlays on CURRENT. Also, flashrom SPI!
Message-ID:  <CACNAnaGLPgEs0MVMBbit78WGDCOMxxAcTXBYFZgamPZBmf5p3g@mail.gmail.com>
In-Reply-To: <1532548163.59286.0@hraggstad.unrelenting.technology>
References:  <1532548163.59286.0@hraggstad.unrelenting.technology>

next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Jul 25, 2018 at 2:49 PM, Greg V <greg@unrelenting.technology> wrote=
:
> Hi,
>
> One thing I have noticed with CURRENT on an Orange Pi PC: since we're usi=
ng
> device trees imported from Linux, some drivers are not accessible out of =
the
> box.
>
> So I wrote a couple overlays:
>
> Thermal sensor: https://github.com/freebsd/freebsd/pull/162
>
> SPI: https://github.com/freebsd/freebsd/pull/166
>
> But not everyone would figure out how to make and even just use overlays=
=E2=80=A6
>
> (if anyone is wondering: place them into /boot/dtb/overlays and add a lis=
t
> of them (filenames including extension) to /boot/loader.conf like so:
> fdt_overlays=3D"sun8i-h3-sid.dtbo,sun8i-h3-ts.dtbo,sun8i-h3-spi.dtbo" =E2=
=80=94 and
> reboot)

Just FYI- omitting the extension should also work fine here. If it
doesn't, that's another bug on its own. =3D)

> Can someone commit these overlays / add more for other SoCs maybe?

I think manu was working on some thermal sensor stuff earlier (though
my memory may be wrong), so we'll see what he says.

> P.S. I also wrote spigen support for flashrom:
> https://github.com/flashrom/flashrom/pull/53
> With this, I can flash and verify a Winbond W25Q32.V flash chip from my
> Orange Pi! :)
>
> _______________________________________________
> freebsd-arm@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org"



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CACNAnaGLPgEs0MVMBbit78WGDCOMxxAcTXBYFZgamPZBmf5p3g>