Date: Thu, 06 Nov 2003 15:34:49 -0800 From: Jason Williams <jwilliams@courtesymortgage.com> To: freebsd-questions@freebsd.org Subject: Re: Problems installing 4.9 on IBM Xseries server Message-ID: <5.2.1.1.0.20031106153417.00aec8c0@pop.courtesymortgage.com> In-Reply-To: <5.2.1.1.0.20031106130313.00a7af50@pop.courtesymortgage.com >
next in thread | previous in thread | raw e-mail | index | archive | help
It says for 4.9, under hardware: ServerWorks CSB5 ATA66/ATA100 Well, isn't that what I have? Jason At 01:04 PM 11/6/2003 -0800, you wrote: >Hello everyone. > >Running into a bit of a problem installing 4.9 on a IBM X series server. > >The server has 3 SCSI drives with a servRAID card. I have RAID 5 >configured on it. > >4.9 did not detect the drives, so im wondering if it even supports it or >if there is a driver I can d/l to use and boot to it. > >Here is some output from a second server running *coughLinuxcough*: > >SvrWks CSB5: IDE controller at PCI slot 00:0f.1 >SvrWks CSB5: chipset revision 147 >SvrWks CSB5: not 100% native mode: will probe irqs later >SvrWks CSB5: simplex device: DMA forced > ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA >SvrWks CSB5: simplex device: DMA forced > ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA > >SCSI subsystem driver Revision: 1.00 >Warning: Adapter 0 Firmware Compatible Version is MR600, but should be SA510 >Warning: Adapter 0 BIOS Compatible Version is MR600, but should be SA510 >Warning ! ! ! ServeRAID Version Mismatch >scsi0 : IBM PCI ServeRAID 5.10.21 > Vendor: IBM Model: SERVERAID Rev: 1.00 > Type: Direct-Access ANSI SCSI revision: 02 > Vendor: IBM Model: SERVERAID Rev: 1.00 > Type: Processor ANSI SCSI revision: 02 > Vendor: IBM Model: 32P0032a S320 1 Rev: 1 > Type: Processor ANSI SCSI revision: 02 >Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > >Any suggestions are appreciated. > >Jason > >_______________________________________________ >freebsd-questions@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-questions >To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.2.1.1.0.20031106153417.00aec8c0>