Date: Sat, 21 Aug 1999 21:31:42 -0500 From: Dick Arnold <darnold@fgi.net> To: plopez@sympatico.ca, "Paul A.Lopez" <plopez@sympatico.ca>, freebsd-questions@FreeBSD.ORG Cc: plopez@sympatico.ca Subject: Re: Problem w/Kernel Config Message-ID: <99082121371700.00268@darnold.fgi.net> References: <99082117503700.02620@vermithrax.house>
next in thread | previous in thread | raw e-mail | index | archive | help
This works for me: #Added for Soundblaster 16 controller snd0 device sb0 at isa ? port 0x220 irq 5 drq 1 device sbxvi0 at isa ? drq 5 device sbmidi0 at isa ? port 0x330 device opl0 at isa ? port 0x388 On Sat, 21 Aug 1999, Paul A.Lopez wrote: > Here's one for you.. Hoping someone there can help.. I've got an SB16 ISA (real > SB, not a knock off, and I'm trying to compile a kernel w/sound support in it.. > > Windows tells me the settings are IRQ 5, 8bit DMA 1, 16bit DMA 5, at 0x220 and > 0x330 (midi) Followed the instructions in the handbook and I'm getting a failure > during 'make'.. Here's the error lines: > > soundcard.o: In function 'sndpoll': > soundcard.o(.text+0x2f7): undefined reference to `MIDIbuf_poll' > sound_switch.o: In function `sound_read_sw': > sound_switch.o(.text+0x52d): undefined reference to `MIDIbuf_read' > sound_switch.o: In function `sound_write_sw': > sound_switch.o(.text+0x5ad): undefined reference to `MIDIbuf_write' > sound_switch.o: In function `sound_open_sw': > sound_switch.o(.text+0x68f): undefined reference to `MIDIbuf_open' > sound_switch.o: In function `sound_release_sw': > sound_switch.o(.text+0x72b): undefined reference to `MIDIbuf_release' > sound_switch.o: In function `sound_ioctl_sw': > sound_switch.o(.text+0x835): undefined reference to `MIDIbuf_ioctl' > *** Error code 1 > > Stop. > > I've done everything listed on the handbook pages.. But it keeps giving > me this error. > > the only thing I can possible think of is if the arguments in the kernel config > file have to be in a certain location.. I just tacked them on at the end.. That > couldn'd make the diff? Could it? > > Below is include a copy of the configuration file.. The three lines relating to > my (attempted) sound configuration are at the very end, the last three lines.. > > And suggestions or FAQ/help resources you could direct me to would be > appreciated... > > cheers > > # > # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks > # > # For more information read the handbook part System Administration -> > # Configuring the FreeBSD Kernel -> The Configuration File. > # The handbook is available in /usr/share/doc/handbook or online as > # latest version from the FreeBSD World Wide Web server > # <URL:http://www.FreeBSD.ORG/>; > # > # An exhaustive list of options and more detailed explanations of the > # device lines is present in the ./LINT configuration file. If you are > # in doubt as to the purpose or necessity of a line, check first in LINT. > # > # $Id: GENERIC,v 1.143.2.12 1999/05/14 15:12:26 jkh Exp $ > > machine "i386" > cpu "I386_CPU" > cpu "I486_CPU" > cpu "I586_CPU" > cpu "I686_CPU" > ident VERMITHRAX > maxusers 32 > > options MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root device [keep this!] > options MFS #Memory Filesystem > options MFS_ROOT #MFS usable as root device, "MFS" req'ed > options NFS #Network Filesystem > options NFS_ROOT #NFS usable as root device, "NFS" req'ed > options MSDOSFS #MSDOS Filesystem > options "CD9660" #ISO 9660 Filesystem > options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed > options PROCFS #Process filesystem > options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] > options SCSI_DELAY=15000 #Be pessimistic about Joe SCSI device > options UCONSOLE #Allow users to grab the console > options FAILSAFE #Be conservative > options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > > config kernel root on wd0 > > # To make an SMP kernel, the next two are needed > #options SMP # Symmetric MultiProcessor Kernel > #options APIC_IO # Symmetric (APIC) I/O > # Optionally these may need tweaked, (defaults shown): > #options NCPU=2 # number of CPUs > #options NBUS=4 # number of busses > #options NAPIC=1 # number of IO APICs > #options NINTR=24 # number of INTs > > controller isa0 > controller pnp0 > controller eisa0 > controller pci0 > > controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 > disk fd0 at fdc0 drive 0 > disk fd1 at fdc0 drive 1 > > options "CMD640" # work around CMD640 chip deficiency > controller wdc0 at isa? port "IO_WD1" bio irq 14 > disk wd0 at wdc0 drive 0 > disk wd1 at wdc0 drive 1 > > controller wdc1 at isa? port "IO_WD2" bio irq 15 > disk wd2 at wdc1 drive 0 > disk wd3 at wdc1 drive 1 > > options ATAPI #Enable ATAPI support for IDE bus > options ATAPI_STATIC #Don't do it as an LKM > device acd0 #IDE CD-ROM > device wfd0 #IDE Floppy (e.g. LS-120) > > # A single entry for any of these controllers (ncr, ahb, ahc) is > # sufficient for any number of installed devices. > controller ncr0 > controller ahb0 > controller ahc0 > controller isp0 > > # This controller offers a number of configuration options, too many to > # document here - see the LINT file in this directory and look up the > # dpt0 entry there for much fuller documentation on this. > controller dpt0 > > controller adv0 at isa? port ? cam irq ? > controller adw0 > controller bt0 at isa? port ? cam irq ? > controller aha0 at isa? port ? cam irq ? > > controller scbus0 > > device da0 > > device sa0 > > device pass0 > > device cd0 #Only need one of these, the code dynamically grows > > device wt0 at isa? port 0x300 bio irq 5 drq 1 > device mcd0 at isa? port 0x300 bio irq 10 > > controller matcd0 at isa? port 0x230 bio > > device scd0 at isa? port 0x230 bio > > # atkbdc0 controlls both the keyboard and the PS/2 mouse > controller atkbdc0 at isa? port IO_KBD tty > device atkbd0 at isa? tty irq 1 > device psm0 at isa? tty irq 12 > > device vga0 at isa? port ? conflicts > > # splash screen/screen saver > pseudo-device splash > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? tty > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > #device vt0 at isa? tty > #options XSERVER # support for X server > #options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines > #options PCVT_SCANSET=2 # IBM keyboards are non-std > > device npx0 at isa? port IO_NPX irq 13 > > # > # Laptop support (see LINT for more options) > # > device apm0 at isa? disable flags 0x31 # Advanced Power Management > > # PCCARD (PCMCIA) support > #controller card0 > #device pcic0 at card? > #device pcic1 at card? > > device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 > device sio1 at isa? port "IO_COM2" tty irq 3 > device sio2 at isa? disable port "IO_COM3" tty irq 5 > device sio3 at isa? disable port "IO_COM4" tty irq 9 > > # Parallel port > device ppc0 at isa? port? flags 0x40 net irq 7 > controller ppbus0 > device lpt0 at ppbus? > device plip0 at ppbus? > device ppi0 at ppbus? > #controller vpo0 at ppbus? > > # > # The following Ethernet NICs are all PCI devices. > # > device ax0 # ASIX AX88140A > device de0 # DEC/Intel DC21x4x (``Tulip'') > device fxp0 # Intel EtherExpress PRO/100B (82557, 82558) > device mx0 # Macronix 98713/98715/98725 (``PMAC'') > device pn0 # Lite-On 82c168/82c169 (``PNIC'') > device rl0 # RealTek 8129/8139 > device tl0 # Texas Instruments ThunderLAN > device tx0 # SMC 9432TX (83c170 ``EPIC'') > device vr0 # VIA Rhine, Rhine II > device vx0 # 3Com 3c590, 3c595 (``Vortex'') > device wb0 # Winbond W89C840F > device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') > > # Order is important here due to intrusive probes, do *not* alphabetize > # this list of network interfaces until the probes have been fixed. > # Right now it appears that the ie0 must be probed before ep0. See > # revision 1.20 of this file. > > #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 > #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 > #device ep0 at isa? port 0x300 net irq 10 > #device ex0 at isa? port? net irq? > #device fe0 at isa? port 0x300 net irq ? > #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 > #device lnc0 at isa? port 0x280 net irq 10 drq 0 > #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 > #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 > #device cs0 at isa? port 0x300 net irq ? > > pseudo-device loop > pseudo-device ether > pseudo-device sl 1 > pseudo-device ppp 1 > pseudo-device tun 1 > pseudo-device pty 16 > pseudo-device gzip # Exec gzipped a.out's > > # KTRACE enables the system-call tracing facility ktrace(2). > # This adds 4 KB bloat to your kernel, and slightly increases > # the costs of each syscall. > options KTRACE #kernel tracing > > # This provides support for System V shared memory and message queues. > # > options SYSVSHM > options SYSVMSG > options SYSVSEM > > # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be > # aware of the legal and administrative consequences of enabling this > # option. The number of devices determines the maximum number of > # simultaneous BPF clients programs runnable. > #pseudo-device bpfilter 4 #Berkeley packet filter > > #Sound Card Configuration > > controller snd0 > > device sbxvi0 at isa? drq 5 > device sbmidi0 at isa? port 0x330 > > -- Paul A. Lopez > plopez@sympatico.ca > plopez@magma.ca > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?99082121371700.00268>