Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 5 Sep 2001 18:01:13 -0500
From:      hundin@hal-pc.org
To:        freebsd-questions@freebsd.org
Subject:   kernel config appears fubared
Message-ID:  <20010905180113.2479692e.hundin@hal-pc.org>

next in thread | raw e-mail | index | archive | help
make always crashes with alot of errors in smb
there is a log of make at http://www.hal-pc.org/~hundin/BLEH.log
i would appreciate any comments, suggestions, or larts you may put my way.

#begin config BLEH
machine         i386
cpu             I686_CPU
ident           test1
maxusers        50

options         INET                    #InterNETworking
options         INET6                   #IPv6 communications protocols
options         FFS                     #Berkeley Fast Filesystem
options         FFS_ROOT                #FFS usable as root device [keep this!]
options         SOFTUPDATES             #Enable FFS soft updates support
options         MFS                     #Memory Filesystem
options         MD_ROOT                 #MD is a potential root device
options         NFS                     #Network Filesystem
options         NFS_ROOT                #NFS usable as root device, NFS required
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         CD9660_ROOT             #CD-ROM usable as root, CD9660 required
options         SMBFS			#evil M$ half-assed protocol
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
options         SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
options         UCONSOLE                #Allow users to grab the console
options         USERCONFIG              #boot -c editor
options         VISUAL_USERCONFIG       #visual boot -c editor
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
options         P1003_1B                #Posix P1003_1B real-time extensions
options         _KPOSIX_PRIORITY_SCHEDULING
options         ICMP_BANDLIM            #Rate limit bad replies
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev

device          isa
device          pci

# Floppy drives
device          fdc0    at isa? port IO_FD1 irq 6 drq 2
device          fd0     at fdc0 drive 0
# ATA and ATAPI devices
device          ata
device          atadisk                 # ATA disk drives

device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
options         ATA_STATIC_ID           #Static device numbering

# SCSI Controllers
device          ahc             # AHA2940 and onboard AIC7xxx devices

# SCSI peripherals
device          scbus           # SCSI bus (required)
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc0 at isa? port IO_KBD
device          atkbd0  at atkbdc? irq 1 flags 0x1
device          psm0    at atkbdc? irq 12

device          vga0    at isa?

# splash screen/screen saver
pseudo-device   splash

# syscons is the default console driver, resembling an SCO console
device          sc0     at isa? flags 0x100

# Floating point support - do not disable.
device          npx0    at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device          apm0    at nexus? disable flags 0x20 # Advanced Power Management

# Parallel port
device          ppc0    at isa? irq 7
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          ppi             # Parallel port interface device

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
device          tl              # Texas Instruments ThunderLAN
device          xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device   loop    16      # Network loopback
pseudo-device   ether           # Ethernet support
pseudo-device   ppp     2       # Kernel PPP
pseudo-device   tun     2       # Packet tunnel.
pseudo-device   pty     20      # Pseudo-ttys (telnet etc)
pseudo-device   md              # Memory "disks"
pseudo-device   gif     4       # IPv6 and IPv4 tunneling
pseudo-device   faith   2       # IPv6-to-IPv4 relaying (translation)
pseudo-device   bpf             #Berkeley packet filter

# Serial (COM) ports
device          sio0    at isa? port IO_COM1 flags 0x10 irq 4
device          sio1    at isa? port IO_COM2 irq 3

# Sound     badly patched into generic kernel
device          pcm0    at isa? irq 10 drq 1 flags 0x0
device          sbc0    at isa? port 0x220 irq 5 drq 1 flags 0x15
device          pca0    at isa? port IO_TIMER1

options         COMPAT_LINUX
options         PNPBIOS
options         SHOW_BUSYBUFS
options         INCLUDE_CONFIG_FILE
options         CPU_ENABLE_SSE
options         IPSEC
options         IPSEC_ESP
options         IPX
options         NETSMB
options         NETSMBCRYPTO
options         NETGRAPH
options         NETGRAPH_ASYNC
options         NETGRAPH_BPF
options         NETGRAPH_ETHER
options         NETGRAPH_IFACE
options         NETGRAPH_PPP
options         PPP_BSDCOMP
options         PPP_DEFLATE
options         PPP_FILTER
options         ETHER_II
options         ETHER_8023
options         ETHER_8022
options         ETHER_SNAP
pseudo-device   stf
options         MROUTING
options         IPFIREWALL
options         IPFIREWALL_VERBOSE
options         IPFIREWALL_FORWARD
options         IPFIREWALL_DEFAULT_TO_ACCEPT
options         IPV6FIREWALL
options         IPV6FIREWALL_VERBOSE_LIMIT=100
options         IPDIVERT
options         IPFILTER
options         IPFILTER_LOG
options         IPSTEALTH
options         RANDOM_IP_ID
options         DUMMYNET
options         QUOTA
options         ACCEPT_FILTER_DATA
#end config

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010905180113.2479692e.hundin>