Date: Wed, 11 Jan 95 20:16:31 -0200 From: Willem Jan Withagen <wjw@wjw.iaehv.nl> To: questions@FreeBSD.org Subject: Strange message from NCR setup Message-ID: <2f143ca0.wjw@wjw.iaehv.nl>
next in thread | raw e-mail | index | archive | help
Hoi The same guy as asking the Buslogic problem. :-( That same motherboard dus work with an NCR chipset, but there the kernel reports the appended stuff. (the "interesting is between the ><'s ") Now I expected the system not to function when a controller did'nt have any interrupts, but it does. And iozone gives me > 3 Mb when writing a 64 Mb file with 4096 blocks, so it sort of seem oke? What do I do wrong here? Again I've tried al settings, but the message stays the same. (the jumper on the NCR board is in the ENable possition) The board is in the right most slot, which is called 1 by ASUS Thanx for just about any clou, Willem Jan Withagen ------------ Jan 11 14:47:01 misc kernel: pci0: scanning device 0..31, mechanism=1. Jan 11 14:47:02 misc kernel: pci0:0: vendor=0x1039, device=0x406, class=multimedia [not supported] Jan 11 14:47:02 misc kernel: map(10): mem32(80000010) Jan 11 14:47:02 misc kernel: map(14): mem64(80000010) Jan 11 14:47:02 misc kernel: map(18): mem32(80000018) Jan 11 14:47:02 misc kernel: map(1c): mem64(80000018) Jan 11 14:47:02 misc kernel: map(20): mem32(80000020) Jan 11 14:47:02 misc kernel: map(24): mem64(80000020) Jan 11 14:47:02 misc kernel: pci0:1: vendor=0x1039, device=0x8, class=old [not supported] >>>>>>>>>> Jan 11 14:47:02 misc kernel: ncr0 <ncr 53c810 scsi> int a (config) not bound on pci0:6 Jan 11 14:47:02 misc kernel: reg20: virtual=0xf4c19000 physical=0xc0000000 Jan 11 14:47:02 misc kernel: pci_map_int failed: no int line set. Jan 11 14:47:02 misc kernel: interruptless mode: reduced performance. <<<<<<<<<< Jan 11 14:47:02 misc kernel: ncr0: restart (scsi reset). Jan 11 14:47:02 misc kernel: ncr0 scanning for targets 0..6 (1.12) Jan 11 14:47:02 misc kernel: ncr0 waiting for scsi devices to settle Jan 11 14:47:02 misc kernel: ncr0 targ 0 lun 0: type 0(direct) fixed SCSI2 Jan 11 14:47:02 misc kernel: ncr0 targ 0 lun 0: <QUANTUM EMPIRE_2100S 1022> Jan 11 14:47:02 misc kernel: sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. Jan 11 14:47:02 misc kernel: sd0: 2006MB (4108600 total sec), 3053 cyl, 12 head, 112 sec, bytes/sec 512 Jan 11 14:47:02 misc kernel: ncr0 targ 6 lun 0: type 1(sequential) removable SCSI2 Jan 11 14:47:02 misc kernel: ncr0 targ 6 lun 0: <HP HP35470A 1109> Jan 11 14:47:02 misc kernel: st0(ncr0:6:0): 200ns (5 Mb/sec) offset 8. Jan 11 14:47:03 misc kernel: st0: density code 0x13, drive empty Jan 11 14:47:03 misc kernel: pci0:13: vendor=0x1095, device=0x640, class=storage [not supported] Jan 11 14:47:03 misc kernel: pci uses physical addresses from 0xc0000000 to 0xc0001000 -- Stichting Internet Access Eindhoven, voice: +31-40-438330, data: +31-40-439436 P.O. 928, 5600 AX Eindhoven, The Netherlands Full Internet connectivity for only fl 35,- a month. Call now, and login as 'new'.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2f143ca0.wjw>