Date: Fri, 24 Mar 2006 08:35:33 -0500 From: "fbsd_user" <fbsd_user@a1poweruser.com> To: "Dmitry Pisklov" <Pisklov@starsoftlabs.com>, <freebsd-questions@freebsd.org> Subject: RE: USR 56k Internal WinModem Message-ID: <MIEPLLIBMLEEABPDBIEGMEAMHDAA.fbsd_user@a1poweruser.com> In-Reply-To: <B4E80A516FD2DE4DAD0579FB39AD0E9504E46EF1@argon.star-sw.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Internal modems are manufactured for two target markets, MS/Windows
and
every thing else. Winmodems are cheep because the hardware
controller
function is handled by the software you have to install into
windows.
This hardware controller function is contained in a chip on the
modem
circuit board. Winmodems are missing this chip and have a
replacement
chip that directs the modem to use driver software running in the
windows system to perform the controller function. The most common
replacement chip is manufactured by Lucent. There are many versions
of
this Lucent chip each version needing a different software driver
version.
Up until version 4.4, FBSD did not have any solution to using
Winmodems, but with the release of 4.4 the ports collection contains
the "Linux Winmodem 'ltmdm' driver" which was ported to FBSD.
This port is very poorly documented, only works with a limited
number of Lucent chip version, and is unreliable. Your whole
internet
connection is managed by your modem and trying to shoe horn a modem
specially manufactured for the MS/Windows operating system into FBSD
is not the way to achieve a satisfactory dialup connection.
-----Original Message-----
From: owner-freebsd-questions@freebsd.org
[mailto:owner-freebsd-questions@freebsd.org]On Behalf Of Dmitry
Pisklov
Sent: Friday, March 24, 2006 5:59 AM
To: freebsd-questions@freebsd.org
Subject: USR 56k Internal WinModem
How can I set up (if I can do it at all :)) my US Robotics winmodem?
I use FreeBSD 6.0 stable. Here's what says pciconf:
none2@pci3:2:0: class=0x078000 card=0x008112b9 chip=0x100612b9
rev=0x00 hdr=0x00
vendor = '3COM Corp, Modem Division (Formerly US Robotics)'
device = 'USR 56k Internal WinModem'
class = simple comms
I've found no drivers for it...
Best regards,
šššššššššššššššššššššššššššššš Dmitry Pisklov
šššššššššššššššššššššššššššššš Developer
šššššššššššššššššššššššššššššš StarSoft Development Labs
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?MIEPLLIBMLEEABPDBIEGMEAMHDAA.fbsd_user>