Date: Wed, 29 Mar 95 11:38:56 MST From: terry@cs.weber.edu (Terry Lambert) To: gaspar@STL-17SIMA.ARMY.MIL Cc: questions@FreeBSD.org Subject: Re: Installing to Syquest Drive Message-ID: <9503291838.AA20164@cs.weber.edu> In-Reply-To: <9503291612.AA19367@cs.weber.edu> from "Al Gaspar" at Mar 29, 95 10:16:22 am
next in thread | previous in thread | raw e-mail | index | archive | help
> Thanks for the reply. I went ahead and put another SyQuest disk > in my drive and said to use the whole thing. My C drive (sd0) I > partitioned so that everything went to DOS except for 2 MB (that was > all it saw left) which I gave to swap; this allowed me to disklabel > the rest of it as /dos. I put /, swap, and /usr on the a, b, and e > partitions of the SyQuest which is sd1. I then followed the > directions and rebooted from the hard disk. I had followed the > instructions under troubleshooting for using a drive other than 0 as > my boot drive; so I selected FreeBSD as my operating system and typed > sd(1,a)/kernel at the boot prompt. Now my screen fills with the > following error echoed over and over again: > > ERROR: C:0 H:0 S:0 > > Do you have any idea what may be going wrong. Thanks for the help. Bruce needs to handle this one. The SCSI sense code is probably coming back with an (invalid) size of 0; this was recently discussed on the list, but I didn't pay much attention to it -- I'm not sure if the latest SNAP will fix this or if you will need 2.1 when it comes out or what. You could probably manually do it, but the recent tool changes have made me unsure as to exactly what you would have to do to get it to work. Terry Lambert terry@cs.weber.edu --- Any opinions in this posting are my own and not those of my present or previous employers.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9503291838.AA20164>