Date: Sat, 26 Jan 2008 15:41:55 +0000 From: "Bob Bing" <bobbbing@googlemail.com> To: freebsd-questions@freebsd.org Subject: k3b not recognizing ATAPI DVD A DH20A1S UX11 write capability Message-ID: <8c75d7960801260741p63cfe9x98fea042777caedc@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi
I installed k3b-1.0.4/cdrtools-2.01_6/dvd+rw-tools-7.0 on an amd64
6.3machine running GENERIC but k3b gives the following error:
k3b: NON_CRITICAL
k3b: PROBLEM: No CD/DVD writer found.
k3b: DETAILS: K3b did not find an optical writing device in your system.
Thus, you will not be able to burn CDs or DVDs. However, you can still use
other K3b features like audio track extraction or audio transcoding or
ISO9660 image creation.
k3b: SOLUTION:
Any hints on how I can fix this? It worked fine under Linux and OpenBSD
(which I used to burn the 6.3 CDs)
Thanks a lot
Bob
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-RELEASE #0: Wed Jan 16 01:43:02 UTC 2008
root at palmer.cse.buffalo.edu
<http://lists.freebsd.org/mailman/listinfo/freebsd-acpi>:/usr/obj/usr/src/sys/SMP
ACPI APIC Table: <RS485 AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2299.75-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60fb1 Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
real memory = 1039007744 (990 MB)
avail memory = 989507584 (943 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Jan 16 2008 01:41:13)
acpi0: <RS485 AWRDACPI> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
ACPI-0438: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000c8ebc0 StartNode 0xffffff0000c8ebc0 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKD] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000c8ea40 StartNode 0xffffff0000c8ea40 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKA] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000c8e8c0 StartNode 0xffffff0000c8e8c0 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKB] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000c8e740 StartNode 0xffffff0000c8e740 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000cd29c0 StartNode 0xffffff0000cd29c0 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKD] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000cd2840 StartNode 0xffffff0000cd2840 ReturnNode 0
ACPI-0438: *** Error: Looking up [LNKA] in namespace, AE_NOT_FOUND
SearchNode 0xffffff0000cd26c0 StartNode 0xffffff0000cd26c0 ReturnNode 0
acpi0: Power Button (fixed)
ACPI-0381: *** Error: Looking up [_PCT] in namespace, AE_ALREADY_EXISTS
ACPI-1304: *** Error: Method execution failed [\\_SB_.MEM_._CRS]
(Node 0xffffff0000c95a00), AE_ALREADY_EXISTS
ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS]
(Node 0xffffff0000c95a00), AE_ALREADY_EXISTS
can't fetch resources for \\_SB_.MEM_ - AE_ALREADY_EXISTS
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
atapci0: <ATI IXP400 SATA150 controller> port
0xfe00-0xfe07,0xfd00-0xfd03,0xfc00-0xfc07,0xfb00-0xfb03,0xfa00-0xfa0f
mem 0xfe02f000-0xfe02f1ff irq 23 at device 17.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <ATI IXP400 SATA150 controller> port
0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf50f
mem 0xfe02e000-0xfe02e1ff irq 22 at device 18.0 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
ohci0: <ATI SB400 USB Controller> mem 0xfe02d000-0xfe02dfff irq 19 at
device 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xfe02c000-0xfe02cfff irq 19 at
device 19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <ATI SB400 USB 2.0 controller> mem 0xfe02b000-0xfe02bfff irq 19
at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: waiting for BIOS to give up control
usb2: timed out waiting for BIOS
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <ATI SB400 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
umass0: Generic USB2.0-CRW, rev 2.00/11.22, addr 2
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci2: <ATI IXP400 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf300-0xf30f at device 20.1 on
pci0
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xde00-0xdeff mem
0xfddff000-0xfddff0ff irq 22 at device 5.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:19:21:3a:67:6c
pci0: <multimedia, audio> at device 20.5 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7
drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uhub0: device problem (SET_ADDR_FAILED), disabling port 2
ukbd0: vendor 0x1241 USB Keyboard, rev 1.10/2.90, addr 2, iclass 3/1
kbd2 at ukbd0
uhid0: vendor 0x1241 USB Keyboard, rev 1.10/2.90, addr 2, iclass 3/1
Timecounters tick every 1.000 msec
hptrr: no controller detected.
ad8: 152627MB <WDC WD1600JS-00NCB1 10.02E02> at ata4-master SATA150
acd0: DVDR <ATAPI DVD A DH20A1S/UX11> at ata5-master SATA150
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad8s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8c75d7960801260741p63cfe9x98fea042777caedc>