Date: Wed, 29 Aug 2018 15:12:01 +0200 From: Emmanuel Vadot <manu@bidouilliste.com> To: Daniel Braniss <danny@cs.huji.ac.il> Cc: Mark Millard <marklmi@yahoo.com>, Mark Millard via freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: FYI: A Pine64+ 2GB thermal result during a -j4 buildworld's libllvm build on head -r338341 Message-ID: <20180829151201.e3acdd8f65a60e861987489f@bidouilliste.com> In-Reply-To: <C72097A5-931B-4420-8336-EB9B1366165C@cs.huji.ac.il> References: <4FB22C52-44DF-4868-B30F-5E07DE9F2198@yahoo.com> <20180829135057.742947ba512467bd82671cf0@bidouilliste.com> <C72097A5-931B-4420-8336-EB9B1366165C@cs.huji.ac.il>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 29 Aug 2018 15:41:32 +0300 Daniel Braniss <danny@cs.huji.ac.il> wrote: >=20 >=20 > > On 29 Aug 2018, at 14:50, Emmanuel Vadot <manu@bidouilliste.com> wrote: > >=20 > > On Wed, 29 Aug 2018 04:07:28 -0700 > > Mark Millard via freebsd-arm <freebsd-arm@freebsd.org <mailto:freebsd-a= rm@freebsd.org>> wrote: > >=20 > >> This head -r338341 based Pine64+ 2GB has a case, heatsinks, > >> and a fan. > >>=20 > >> # sysctl -a | grep therm > >> dev.aw_thermal.0.gpu2: 28C > >> dev.aw_thermal.0.gpu1: 29C > >> dev.aw_thermal.0.cpu: 31C > >> dev.aw_thermal.0.%parent: simplebus0 > >> dev.aw_thermal.0.%pnpinfo: name=3Dthermal_sensor@1c25000 compat=3Dallw= inner,sun50i-a64-ths > >> dev.aw_thermal.0.%location:=20 > >> dev.aw_thermal.0.%driver: aw_thermal > >> dev.aw_thermal.0.%desc: Allwinner Thermal Sensor Controller > >> dev.aw_thermal.%parent:=20 > >>=20 > >=20 > > That seems very very low. > mine (Friendlyarm/allwinner/a64)is too cold to believe: >=20 > dev.aw_thermal.0.gpu2: 17C > dev.aw_thermal.0.gpu1: 17C > dev.aw_thermal.0.cpu: 15C > dev.aw_thermal.0.%parent: simplebus0 > dev.aw_thermal.0.%pnpinfo: name=3Dthermal_sensor@1c25000 compat=3Dallwinn= er,sun50i-a64-ths > dev.aw_thermal.0.%location:=20 > dev.aw_thermal.0.%driver: aw_thermal > dev.aw_thermal.0.%desc: Allwinner Thermal Sensor Controller > dev.aw_thermal.%parent: Indeed it does. Do you have the big ass heatsink + fan on it ? https://www.friendlyarm.com/index.php?route=3Dproduct/product&path=3D82&pr= oduct_id=3D133 On my pine64 (Not LTS so A64), when it's idle the three sensors are ~22C. My IR thermometer reports a max temp of 33C when I 'scan' the chip. Could you sysctl dev.aw_sid.0.ths-calib ? I'll try to test on my NanoPi 64 with the heatsink. > and it?s summer here. >=20 > danny >=20 > >=20 > > With 4 cpuburn-a53 process running I easily get to ~60C for cpu and > > ~55C for the gpus sensor. > > https://people.freebsd.org/~manu/cpuburn-a53 <https://people.freebsd.or= g/~manu/cpuburn-a53> > >=20 > >> This was during a -j4 buildworld's: > >>=20 > >> Building /usr/obj/cortexA53_clang/arm64.aarch64/usr/src/arm64.aarch64/= lib/clang/libllvm/CodeGen/MachineBranchProbabilityInfo.o > >> Building /usr/obj/cortexA53_clang/arm64.aarch64/usr/src/arm64.aarch64/= lib/clang/libllvm/CodeGen/MachineCSE.o > >> Building /usr/obj/cortexA53_clang/arm64.aarch64/usr/src/arm64.aarch64/= lib/clang/libllvm/CodeGen/MachineCombiner.o > >> Building /usr/obj/cortexA53_clang/arm64.aarch64/usr/src/arm64.aarch64/= lib/clang/libllvm/CodeGen/MachineCopyPropagation.o > >>=20 > >> No HDMI is plugged in. Ethernet is in use. The serial console > >> is in use. A USB powered hub with a USB drive is plugged in > >> to provide the swap partition. The UFS root file system is on > >> a microsdhc card in the microsd slot and it has TRIM enabled. > >> Nothing else other than the power cord is connected. > >>=20 > >> (The microsd card use with TRIM was requested by someone. > >> I normally use a root filesystem on a USB device because > >> booting from an e.MCC on an sdcard adapter that is put in > >> the sdcard slot does not work these days and I normally > >> avoid microsd cards for much beyond loading the kernel.) > >>=20 > >> =3D=3D=3D > >> Mark Millard > >> marklmi at yahoo.com > >> ( dsl-only.net went > >> away in early 2018-Mar) > >>=20 > >> _______________________________________________ > >> freebsd-arm@freebsd.org mailing list > >> https://lists.freebsd.org/mailman/listinfo/freebsd-arm > >> To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" > >=20 > >=20 > > --=20 > > Emmanuel Vadot <manu@bidouilliste.com <mailto:manu@bidouilliste.com>> <= manu@freebsd.org <mailto:manu@freebsd.org>> > > _______________________________________________ > > freebsd-arm@freebsd.org <mailto:freebsd-arm@freebsd.org> mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-arm <https://lists.f= reebsd.org/mailman/listinfo/freebsd-arm> > > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org <= mailto:freebsd-arm-unsubscribe@freebsd.org>" >=20 --=20 Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20180829151201.e3acdd8f65a60e861987489f>