Date: Wed, 17 May 2000 14:26:20 -0400 (EDT) From: wietse@porcupine.org (Wietse Venema) To: freebsd-mobile@freebsd.org Cc: freebsd-scsi@freebsd.org Subject: Need FreeBSD 4.0 removable SCSI support Message-ID: <20000517182620.143E945659@spike.porcupine.org> In-Reply-To: <20000517185649.A35355@gvr.gvr.org> from Guido van Rooij at "May 17, 0 06:56:49 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
Note: I am not in the freebsd mailing lists. I am just a user.
I am stuck on FreeBSD 2.2.8 because I need support for removable
SCSI controllers, which is absent in FreeBSD 3.x. I had set my
hopes on FreeBSD 4.0 but am running into a problem.
Hardware is ThinkPad 600 and Adaptec SlimSCSI 1460B. Works like
a champ with FreeBSD 2.2.8. Not so with FreeBSD 4.0. Complete
dmesg output is attached at the end of this mail.
I need to get away from 2.2.8 because its Linux emulation cannot
handle Star Office. But I cannot give up removable SCSI support.
The option I see now is to give up FreeBSD in favor of Linux.
I have the following removable devices:
- Removable ethernet. Works on IRQ 3 and IRQ 9.
- Removable modem. Works on IRQ 3 and IRQ 9.
- Removable SCSI controller. Recognized but unusable on IRQ 3 and 9.
With FreeBSD 2.2.8, the removable SCSI controller and the external
JAZ disk are recognized immediately.
With FreeBSD 4.0, no SCSI device is recognized, and the machine
locks up after "camcontrol rescan 0" or "camcontrol rescan scbus".
# camcontrol rescan 0 ((with aic1 on irq 9)
(probe0:aic1:0:0:0): ccb 0xc0addc00 - timed out, phase 0xa6, state 1
Here's another attempt:
(probe0:aic1:0:0:0): ccb 0xc0aeb800 - timed out, phase 0xa6, state 1
and the machine locks up again.
I have been a devoted FreeBSD user from the 386bsd days. I like
running a real operating system.
I really need to upgrade because 2.2.8's Linux emulation is not
good enough for Star Office. I also need removable SCSI support.
I know all this works with Linux. There's a box sitting on my desk,
ready to blow away FreeBSD forever. That would be a shame.
Wietse
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #0: Mon Mar 20 22:50:22 GMT 2000
root@monster.cdrom.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (298.42-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory = 134021120 (130880K bytes)
avail memory = 126054400 (123100K bytes)
Preloaded elf kernel "kernel" at 0xc03c0000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
pcic-pci0: <TI PCI-1250 PCI-CardBus Bridge> mem 0x20301000-0x20301fff at device
2.0 on pci0
pcic-pci1: <TI PCI-1250 PCI-CardBus Bridge> mem 0x20300000-0x20300fff at device
2.1 on pci0
pci0: <NeoMagic MagicGraph 128XD SVGA controller> at 3.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0xefa0-0xefaf at device
7.3 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: cannot reserve I/O port range
isa_compat: didn't get irq for lnc
ad0: 6149MB <IBM-DBCA-206480> [13328/15/63] at ata0-master using UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-1702BC> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
pccard: card inserted, slot 0
pccard: card inserted, slot 1
ed1 at port 0x240-0x25f irq 3 slot 0 on pccard0
ed1: supplying EUI64: 00:04:ac:ff:fe:25:da:dd
ed1: address 00:04:ac:25:da:dd, type NE2000 (16 bit)
ed1: starting DAD for fe80:000a::0204:acff:fe25:dadd
ed1: DAD complete for fe80:000a::0204:acff:fe25:dadd - no duplicates found
sio4 at port 0x2f8-0x2ff irq 9 slot 1 on pccard1
sio4: type 16550A
sio4: unloaded
pccard: card removed, slot 1
pccard: card inserted, slot 1
aic1: <Adaptec 6260/6360 SCSI controller> at port 0x340-0x35f irq 9 slot 1 on pc
card1
aic1: aic6360, dma, disconnection, parity check
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000517182620.143E945659>