From owner-freebsd-scsi  Fri Mar  9 10:50:20 2001
Delivered-To: freebsd-scsi@freebsd.org
Received: from gvr.gvr.org (gvr.gvr.org [212.61.40.17])
	by hub.freebsd.org (Postfix) with ESMTP id 84E5F37B718
	for <freebsd-scsi@freebsd.org>; Fri,  9 Mar 2001 10:50:16 -0800 (PST)
	(envelope-from guido@gvr.org)
Received: by gvr.gvr.org (Postfix, from userid 657)
	id E4F7A5807; Fri,  9 Mar 2001 19:50:14 +0100 (CET)
Date: Fri, 9 Mar 2001 19:50:14 +0100
From: Guido van Rooij <guido@gvr.org>
To: freebsd-scsi@freebsd.org
Subject: problem with Philips cdd3600 and Sym0 driver
Message-ID: <20010309195014.A1505@gvr.gvr.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Sender: owner-freebsd-scsi@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org


I have a cdd3600 hooked up to a sym:
sym0: <810a> port 0xe800-0xe8ff mem 0xe6001000-0xe60010ff irq 10 at device 20.0 
on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
cd0 at sym0 bus 0 target 1 lun 0
cd0: <PHILIPS CDD3600 CD-R/RW 2.00> Removable CD-ROM SCSI-2 device 
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present

When I use xmcd (which uses cam's passthrough), weird things happen. 
E.g. when I eject a disk from xmcd I get:
Mar  9 19:46:27 gvr /kernel: sym0:1:control msgout: 80 6.
Mar  9 19:46:27 gvr /kernel: sym0:1: ERROR (81:0) (6-a3-8) (8/13) @ (scriptb 50:48000000).
Mar  9 19:46:27 gvr /kernel: sym0: script cmd = 98080000
Mar  9 19:46:27 gvr /kernel: sym0: regdump: da 10 00 13 47 08 01 1f 10 06 81 a3 80 00 03 00 00 e0 ec 03 18 ff ff ff.
Mar  9 19:46:27 gvr /kernel: (noperiph:sym0:0:-1:-1): SCSI BUS reset detected.

When a disk is present and I start xmcd, I first get the following
messages from xmcd:
CD audio: (pass0:sym0:0:1:0): PLAY AUDIO MSF. CDB: 47 0 0 0 2 0 23 21 3e 0 
(pass0:sym0:0:1:0): NOT READY csi:0,0,18,2a asc:4,1
(pass0:sym0:0:1:0): Logical unit is in process of becoming ready

CD audio: (pass0:sym0:0:1:0): PLAY AUDIO(12). CDB: a5 0 0 0 0 0 0 2 70 8f 0 0 
(pass0:sym0:0:1:0): NOT READY csi:0,0,18,2e asc:4,1
(pass0:sym0:0:1:0): Logical unit is in process of becoming ready

Manually pressing play again in xmcd will work without error messages.

This is on a 4.2-stable from Januari 15th.

Any ideas? 

-Guido

ps: I am not subscribed to -scsi, so please leave my name in the Cc:


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message