Date: Sun, 24 Apr 2011 15:48:07 +0000 (UTC) From: Adrian Chadd <adrian@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r220989 - head/sys/dev/ath/ath_hal/ar9002 Message-ID: <201104241548.p3OFm7kr037597@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: adrian Date: Sun Apr 24 15:48:07 2011 New Revision: 220989 URL: http://svn.freebsd.org/changeset/base/220989 Log: Use the refactored ar5416WriteTxPowerRateRegisters() call in the ar9285 code. Modified: head/sys/dev/ath/ath_hal/ar9002/ar9285_reset.c Modified: head/sys/dev/ath/ath_hal/ar9002/ar9285_reset.c ============================================================================== --- head/sys/dev/ath/ath_hal/ar9002/ar9285_reset.c Sun Apr 24 14:50:29 2011 (r220988) +++ head/sys/dev/ath/ath_hal/ar9002/ar9285_reset.c Sun Apr 24 15:48:07 2011 (r220989) @@ -148,76 +148,27 @@ ar9285SetTransmitPower(struct ath_hal *a ar5416PrintPowerPerRate(ah, ratesArray); #endif - /* Write the OFDM power per rate set */ - OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE1, - POW_SM(ratesArray[rate18mb], 24) - | POW_SM(ratesArray[rate12mb], 16) - | POW_SM(ratesArray[rate9mb], 8) - | POW_SM(ratesArray[rate6mb], 0) - ); - OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE2, - POW_SM(ratesArray[rate54mb], 24) - | POW_SM(ratesArray[rate48mb], 16) - | POW_SM(ratesArray[rate36mb], 8) - | POW_SM(ratesArray[rate24mb], 0) - ); - - /* Write the CCK power per rate set */ - OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE3, - POW_SM(ratesArray[rate2s], 24) - | POW_SM(ratesArray[rate2l], 16) - | POW_SM(ratesArray[rateXr], 8) /* XR target power */ - | POW_SM(ratesArray[rate1l], 0) - ); - OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE4, - POW_SM(ratesArray[rate11s], 24) - | POW_SM(ratesArray[rate11l], 16) - | POW_SM(ratesArray[rate5_5s], 8) - | POW_SM(ratesArray[rate5_5l], 0) - ); - HALDEBUG(ah, HAL_DEBUG_RESET, - "%s AR_PHY_POWER_TX_RATE3=0x%x AR_PHY_POWER_TX_RATE4=0x%x\n", - __func__, OS_REG_READ(ah,AR_PHY_POWER_TX_RATE3), - OS_REG_READ(ah,AR_PHY_POWER_TX_RATE4)); - - /* Write the HT20 power per rate set */ - OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE5, - POW_SM(ratesArray[rateHt20_3], 24) - | POW_SM(ratesArray[rateHt20_2], 16) - | POW_SM(ratesArray[rateHt20_1], 8) - | POW_SM(ratesArray[rateHt20_0], 0) - ); - OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE6, - POW_SM(ratesArray[rateHt20_7], 24) - | POW_SM(ratesArray[rateHt20_6], 16) - | POW_SM(ratesArray[rateHt20_5], 8) - | POW_SM(ratesArray[rateHt20_4], 0) - ); - + /* + * Adjust the HT40 power to meet the correct target TX power + * for 40MHz mode, based on TX power curves that are established + * for 20MHz mode. + * + * XXX handle overflow/too high power level? + */ if (IEEE80211_IS_CHAN_HT40(chan)) { - /* Write the HT40 power per rate set */ - /* Correct PAR difference between HT40 and HT20/LEGACY */ - OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE7, - POW_SM(ratesArray[rateHt40_3] + ht40PowerIncForPdadc, 24) - | POW_SM(ratesArray[rateHt40_2] + ht40PowerIncForPdadc, 16) - | POW_SM(ratesArray[rateHt40_1] + ht40PowerIncForPdadc, 8) - | POW_SM(ratesArray[rateHt40_0] + ht40PowerIncForPdadc, 0) - ); - OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE8, - POW_SM(ratesArray[rateHt40_7] + ht40PowerIncForPdadc, 24) - | POW_SM(ratesArray[rateHt40_6] + ht40PowerIncForPdadc, 16) - | POW_SM(ratesArray[rateHt40_5] + ht40PowerIncForPdadc, 8) - | POW_SM(ratesArray[rateHt40_4] + ht40PowerIncForPdadc, 0) - ); - /* Write the Dup/Ext 40 power per rate set */ - OS_REG_WRITE(ah, AR_PHY_POWER_TX_RATE9, - POW_SM(ratesArray[rateExtOfdm], 24) - | POW_SM(ratesArray[rateExtCck], 16) - | POW_SM(ratesArray[rateDupOfdm], 8) - | POW_SM(ratesArray[rateDupCck], 0) - ); + ratesArray[rateHt40_0] += ht40PowerIncForPdadc; + ratesArray[rateHt40_1] += ht40PowerIncForPdadc; + ratesArray[rateHt40_2] += ht40PowerIncForPdadc; + ratesArray[rateHt40_3] += ht40PowerIncForPdadc; + ratesArray[rateHt40_4] += ht40PowerIncForPdadc; + ratesArray[rateHt40_5] += ht40PowerIncForPdadc; + ratesArray[rateHt40_6] += ht40PowerIncForPdadc; + ratesArray[rateHt40_7] += ht40PowerIncForPdadc; } + /* Write the TX power rate registers */ + ar5416WriteTxPowerRateRegisters(ah, chan, ratesArray); + return AH_TRUE; #undef POW_SM #undef N
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201104241548.p3OFm7kr037597>