Date: Sat, 01 Dec 2007 18:25:20 +0000 From: Jonathan Wilkie <silkie@gotadsl.co.uk> To: Jose Antonio Galache <jgalache@tlmat.unican.es>, freebsd-x11@FreeBSD.org Subject: Re: xorg 6.9-7.3 upgrade failure - assistance needed Message-ID: <4751A710.2070302@gotadsl.co.uk> In-Reply-To: <474CA497.8010401@gotadsl.co.uk> References: <4749D823.4020902@gotadsl.co.uk> <474A8F04.8020306@tlmat.unican.es> <474CA497.8010401@gotadsl.co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
Jose, everyone, I'm dead in the water at the moment everyone, still can't upgrade and I'm fresh out of ideas. My upgrade of xorg 7.3 is failing on the fact it can't find a dependency configure: error: Package requirements (xproto) were not met: No package 'xproto' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables XAU_CFLAGS and XAU_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. ===> Script "configure" failed unexpectedly. Please report the problem to x11@FreeBSD.org [maintainer] and attach the "/usr/ports/x11/libXau/work/libXau-1.0.3/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an `ls /var/db/pkg`). *** Error code 1 Stop in /usr/ports/x11/libXau. *** Error code 1 Stop in /usr/ports/x11/libXau. *** Error code 1 Stop in /usr/ports/x11/libX11. *** Error code 1 Stop in /usr/ports/x11/libX11. *** Error code 1 Stop in /usr/ports/x11/xorg-libraries. *** Error code 1 Stop in /usr/ports/x11/xorg-libraries. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade.57022.6 env UPGRADE_TOOL=portupgrade UPGRADE_PORT=xorg-libraries-6.9.0 UPGRADE_PORT_VER=6.9.0 make -DFORCE_PKG_REGISTER reinstall HOWEVER BSSS# pkg_info | grep -i xproto xproto-7.0.10_1 X11 protocol headers Shows it to be there....... and it's the latest version available I think. How can we get the upgrade to recognise the dependency is there? Thanks, Jonathan Jonathan Wilkie wrote: > Jose, > > Thanks for your suggestions pkgdb -F didn't fix anything. Granted I > only selected the default actions but running a subsequent portupgrade > still resulted in the same compilation errors. > > The situation is as follows......... help from the group would be > greatly received. My knowledge is limited but we all have to start > somewhere right. > > Anyway xorg ports list looks like this. > > pkg_info | grep -i xorg > linux-xorg-libs-6.8.2_5 Xorg libraries, linux binaries > xorg-clients-6.9.0_3 X client programs and related files from X.Org > xorg-docs-1.4,1 X.org documentation files > xorg-fonts-100dpi-6.9.0_1 X.Org 100dpi bitmap fonts > xorg-fonts-75dpi-6.9.0_1 X.Org 75dpi bitmap fonts > xorg-fonts-cyrillic-7.3 X.Org Cyrillic bitmap fonts > xorg-fonts-miscbitmaps-6.9.0_1 X.Org miscellaneous bitmap fonts > xorg-fonts-truetype-7.3 X.Org TrueType fonts > xorg-fonts-type1-7.3 X.Org Type1 fonts > xorg-fontserver-6.9.0_1 X font server from X.Org > xorg-libraries-6.9.0_1 X11 libraries and headers from X.Org > xorg-nestserver-6.9.0_1 Nesting X server from X.Org > xorg-printserver-6.9.0_2 X Print server from X.Org > xorg-server-6.8.99.903_1 X.Org X server development snapshot and > related programs > xorg-vfbserver-6.9.0_2 X virtual framebuffer server from X.Org > pkg_info | grep -i x11 > arts-1.5.5,1 Audio system for the KDE integrated X11 desktop > gtk-1.2.10_17 Gimp Toolkit for X11 GUI (previous stable version) > gtk-2.10.11 Gimp Toolkit for X11 GUI (current stable version) > nedit-5.5 An X11/Motif GUI text editor for programs and plain text fi > open-motif-2.2.3_2 Motif X11 Toolkit (industry standard GUI (IEEE 1295)) > t1lib-5.1.1,1 A Type 1 Rasterizer Library for UNIX/X11 > xchat-2.8.4_3 An X11 IRC client using the GTK+ 2 toolkit > xine-0.99.4_9 An X11 multimedia player > xorg-libraries-6.9.0_1 X11 libraries and headers from X.Org > xproto-7.0.10_1 X11 protocol headers > xv-3.10a_6 An X11 program that displays images of various formats > > > The pkgdb -F outputs the following and doesn't resolve the following: - > > pkgdb -F > ---> Checking the package registry database > Missing origin: hptraid-3.13 > Skip this for now? [yes] > To skip it without asking in future, please list it in HOLD_PKGS. > Missing origin: hptsvr-3.13 > Skip this for now? [yes] > To skip it without asking in future, please list it in HOLD_PKGS. > Stale origin: 'lang/tcl-tk-wrapper': perhaps moved or obsoleted. > -> The port 'lang/tcl-tk-wrapper' was removed on 2007-05-31 because: > "Replaced by tcl-wrapper and tk-wrapper" > -> Hint: tcl-tk-wrapper-1.0 is required by the following package(s): > tk-8.4.14_1,2 > -> Hint: checking for overwritten files... > -> No files installed by tcl-tk-wrapper-1.0 have been overwritten by > other packages. > Deinstall tcl-tk-wrapper-1.0 ? [no] > Duplicated origin: multimedia/gstreamer - gstreamer-0.10.12 > gstreamer80-0.8.12_2 > Unregister any of them? [no] > Duplicated origin: multimedia/libdca - libdca-0.0.5 libdts-0.0.2_2 > Unregister any of them? [no] > Duplicated origin: audio/gstreamer-plugins-ogg - > gstreamer-plugins-ogg-0.10.12_1,3 gstreamer-plugins-ogg80-0.8.12_2,1 > Unregister any of them? [no] > Duplicated origin: devel/autoconf261 - autoconf-2.59_2 autoconf-2.61_2 > Unregister any of them? [no] > Duplicated origin: audio/gstreamer-plugins-mad - > gstreamer-plugins-mad-0.10.5_2,3 gstreamer-plugins-mad80-0.8.12_3,1 > Unregister any of them? [no] > Duplicated origin: multimedia/gstreamer-plugins - > gstreamer-plugins-0.10.12,3 gstreamer-plugins80-0.8.12_2,1 > Unregister any of them? [no] > Duplicated origin: audio/gstreamer-plugins-flac - > gstreamer-plugins-flac-0.10.5_1,3 gstreamer-plugins-flac80-0.8.12_2,1 > Unregister any of them? [no] > Duplicated origin: audio/gstreamer-plugins-vorbis - > gstreamer-plugins-vorbis-0.10.12_1,3 > gstreamer-plugins-vorbis80-0.8.12_2,1 > Unregister any of them? [no] > Duplicated origin: x11-wm/fluxbox - fluxbox-0.1.14_2 fluxbox-1.0rc3_2 > Unregister any of them? [no] > > Would fixing any of the Unregisters above fix my problem of xorg 7 > compenet compilations failing to find dependances 'fontconfig' or > 'xproto' which by looking at my ports list above should be registered > as installed. > > I've had no experience of pkgdb or portupgrade before following the > install instructions for xorg in /usr/ports/UPDATING so please excuse > any ignorance that may be evident here. > > A way forward would be appreciated. I was considering doing a make > uninstall for each xorg component and running the make install for the > latest version of xorg from the ports tree but I'm worried about > loosing the ability to run my xserver. Even in this mixed up state I > can still start an x session. > > Ta all for any input. > > Jon :o) > > > Jose Antonio Galache wrote: >> Hi Jonathan, >> >> I have a problem because I run first #portupgrade -Rr 'gstreamer*' >> and then portupgrade -a -x 'gstreamer*' and I could finish the >> upgrade (in my case from 6.9 to 7.2), so perhaps trying with >> portupgrade -a -x 'gstreamer*', you could manage the already >> gstreamer ports installed. >> >> After running this I got a stale dependency and I solved it it this way: >> >> Stale dependency: bonobo-1.0.22_3->ghostscript-gpl-8.56_3 manually >> run ‘pkgdb -F’ to fix or specify -0 to force >> >> #pkgdb –Ff >> It asks you to fix the dependencies, so you fix them. >> >> Error: ghostscript –gpl not compatible with ghostscript-gnu >> >> #portupgrade –o print/ghostscript-gpl ghostscript-gnu >> >> >> Then, I followed with the commands indicated in the /usr/ports/UPDATING. >> >>> freedsd-x11 devs, >>> >>> I failed upgrading xorg 7.3 following the /usr/ports/UPDATING entry >>> 20070519. >>> >>> Many components fail with the following: - >>> >>> No package 'fontconfig' found >>> >>> or >>> >>> No package 'xproto' found >>> >>> This is the first time I've followed this process so made the >>> mistake of running portupgrade -a while having some gstreamer ports >>> installed. >>> >>> Thanks for any help you can give. I have the script output....... >>> >>> Thanks, >>> Jonathan >>> _______________________________________________ >>> freebsd-x11@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-x11 >>> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" >>> >> >> I hope this can help you. Luck with it. >> >> Jose. >> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4751A710.2070302>