Date: Fri, 22 Jan 1999 11:46:43 -0500 (EST) From: Patrick Gardella <patrick@cre8tivegroup.com> To: gkaplan <gkaplan@castle.net> Cc: freebsd-questions@FreeBSD.ORG Subject: RE: PnP modem installation Message-ID: <XFMail.990122114643.patrick@cre8tivegroup.com> In-Reply-To: <36A8A6BE.329AB17@castle.net>
next in thread | previous in thread | raw e-mail | index | archive | help
I'm not a pnp guru, but I'll try to help.
dmesg is reporting your modem on CSN 2.
Your pnp command from below is trying to configure CSN 1 (hence pnp 1 0)
The pnp works like this:
pnp CSN LDN ...
So I would suggest the following (in order):
1. if your BIOS supports PnP, try the command "pnp 2 0 enable bios"
2. if that doesn't work, try "pnp 2 0 enable os irq0 3 drq0 0 port0
0x2f8"
Also list the devices when you boot using -c. It may make something clear to
you (I once had port1 set instead of port0).
No need to modify the sio.c.
Patrick
On 22-Jan-99 gkaplan wrote:
> With kernel 2.2.8 , following suggestions in FAQ: " internal PnP
> modem can't find" I have the following result:
> -------- from dmsage output:
> Probe PnP devices
> CSN 1 Vendor ID YMH0030 [0x3000a865] Serial 0x80860001
> CSN 2 Vendor ID USR2090 [0x90207256] Serial 0xffff9f80
> CSN 2 is disabled
> ----------
> sio1 configured irq 3 not in bitmap of probed irqs 0
> sio1 not found at 0x2f8
> ------------ The irq and port address agrees with values reported from
> win95 i.e.,
> com2 port 2f8 ns16550an
> Identifier USR2090ISAPNP\USR2090
> ------------
> I have edited the table siopnp_ids[] in /sys/i386/isa/sio.c to
> include the line :
> { 0x9020756, "USR2090"}, .
> and then rebuilt the kernel.
> ------------
> The FAQ also mentions a pnp command:" you may have to manually
> configure the PnP device using the 'pnp' command at boot time, with a
> command like :
> 'pnp 1 0 enable os irq0 3 drq0 0 port0 0x2f8'
> ------- I have tried this, with no noticeable effect.
> ------- I was told by the modem manufacturer that this modem is an oem
> product and the the computer's oem is the responsible party of the
> installation and proper working of the modem.
> ------- I was told by the computer oem that the modem in question is not
> a winmodem.
>
> ANY SUGGESTIONS? thank you.
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
---
Patrick S. Gardella Director of Web Development
The Creative Group 1-800-804-0783 ext 29 606-858-8029 (fax)
http://www.cre8tivegroup.com PGP Key ID 0xEE2D47A9
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.990122114643.patrick>