Date: Sat, 30 Aug 2003 18:45:49 +1000 From: matti k <overclocker@optusnet.com.au> To: freebsd-current@freebsd.org Subject: Re: snd_csa issues in -CURRENT Message-ID: <20030830184549.3d4d682d.overclocker@optusnet.com.au> In-Reply-To: <20030829123656.5b43d139.ltning@anduin.net> References: <20030827110354.444b4456.ltning@anduin.net> <20030829123656.5b43d139.ltning@anduin.net>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
On Fri, 29 Aug 2003 12:36:56 +0200
Eirik Oeverby <ltning@anduin.net> wrote:
> I might also point out that there are two distinct kinds of distortion
> happening: The click/pop/crackle kind of distortion, and one where a
> sound buffer is repeated over and over 5-10 times - as if the hardware
> has some kind of hickup.
>
> Again - this *only* happens in -CURRENT, not in -STABLE or in any
> other OS (tested OS/2, BeOS, Linux, winXX).
>
> Anyone? :)
>
> /Eirik
I get the same pops/crackling but using a SB Live!
I think it started happening when I switched from 4.x to 5.x
The strange thing is that sound works fine after a reboot but some hours
after that I get the noises. It only happens with music (mp3,ogg).
$ uname -a
FreeBSD platypus.freebsd.home 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Sun
Aug 24 21:53:30 EST 2003
matti@platypus.freebsd.home:/usr/obj/usr/src/sys/PLATY4 i386
dmesg attached
[-- Attachment #2 --]
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Sun Aug 24 21:53:30 EST 2003
matti@platypus.freebsd.home:/usr/obj/usr/src/sys/PLATY4
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0671000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc06711f4.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc06712a0.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) MP 1700+ (1460.16-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 536870912 (512 MB)
avail memory = 514457600 (490 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 1, version: 0x00040010, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040010, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
IOAPIC #0 intpin 17 -> irq 2
IOAPIC #0 intpin 19 -> irq 5
IOAPIC #0 intpin 16 -> irq 9
agp0: <AMD 762 host to AGP bridge> port 0x14b0-0x14b3 mem 0xea000000-0xea000fff,0xec000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
IOAPIC #0 intpin 18 -> irq 11
nvidia0: <GeForce4 Ti 4200 with AGP8X> mem 0xf0000000-0xf7ffffff,0xe9000000-0xe9ffffff irq 11 at device 5.0 on pci1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 766 UDMA100 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0x1400-0x147f mem 0xe8001000-0xe800107f irq 2 at device 9.0 on pci0
xl0: Ethernet address: 00:50:da:88:97:c3
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0x1480-0x149f irq 5 at device 11.0 on pci0
pcm0: <TriTech TR28602 AC97 Codec>
ahc0: <Adaptec aic7850 SCSI adapter> port 0x1000-0x10ff mem 0xe8000000-0xe8000fff irq 9 at device 12.0 on pci0
ahc0: Host Adapter Bios disabled. Using default SCSI device parameters
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounters tick every 10.000 msec
ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100
ad2: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata1-master UDMA66
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <MATSHITA CD-R CW-7502 4.10> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030830184549.3d4d682d.overclocker>