Date: Fri, 20 May 2022 14:01:38 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 264016] kernel crashes on boot: panic: aprobedone: invalid action state 0xfd Message-ID: <bug-264016-227-a7Vt0vOQs1@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-264016-227@https.bugs.freebsd.org/bugzilla/> References: <bug-264016-227@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D264016 --- Comment #4 from Sergei Masharov <serzh@expir.org> --- I have disconnected all disks from problematic SATA controllers and system = was booted without any problems. After that I have connected one disk and system also boot, but with several errors in the console and it took couple minutes, several seconds between e= ach "Root mount waiting for: CAM" message the disk on the problematic controller is not working, I do not see it at t= he dmesg at all. "camcontrol reset" doesn't help. Trying to mount root from zfs:mc []... uhub0: 4 ports with 4 removable, self powered (aprobe3:ahcich11:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 = 00 00 (aprobe3:ahcich11:0:0:0): CAM status: Uncorrectable parity/CRC error (aprobe3:ahcich11:0:0:0): Error 5, Retry was blocked uhub1: 8 ports with 8 removable, self powered (aprobe3:ahcich11:0:0:0): ATA_IDENTIFY. ACB: ec 00 00 00 00 40 00 00 00 00 = 00 00 (aprobe3:ahcich11:0:0:0): CAM status: Uncorrectable parity/CRC error (aprobe3:ahcich11:0:0:0): Error 5, Retry was blocked ugen2.2: <vendor 0x0409 product 0x005a> at usbus2 uhub3 on uhub1 uhub3: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub2: 22 ports with 22 removable, self powered uhub3: 2 ports with 0 removable, self powered Root mount waiting for: usbus0 CAM usbus2 ugen2.3: <AVerMedia A805> at usbus2 ukbd0 on uhub3 ukbd0: <AVerMedia A805, class 0/0, rev 2.00/2.00, addr 2> on usbus2 kbd2 at ukbd0 ugen0.2: <Logitech USB Receiver> at usbus0 ukbd1 on uhub2 ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on usbus0 kbd3 at ukbd1 ugen2.4: <vendor 0x0471 product 0x082d> at usbus2 Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM ahcich11: AHCI reset: device not ready after 31000ms (tfd =3D 00000080) Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM ahcich11: Poll timeout on slot 9 port 0 ahcich11: is 08000000 cs 00000200 ss 00000000 rs 00000200 tfd 00 serr 01880= 000 cmd 0004c917 (aprobe3:ahcich11:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00= 00 (aprobe3:ahcich11:0:0:0): CAM status: Command timeout (aprobe3:ahcich11:0:0:0): Error 5, Retries exhausted ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-264016-227-a7Vt0vOQs1>