Date: Thu, 24 Jul 1997 00:21:18 -0400 From: "Louis A. Mamakos" <louie@TransSys.COM> To: Amancio Hasty <hasty@rah.star-gate.com> Cc: multimedia@FreeBSD.ORG Subject: Re: ftp://rah.star-gate.com/pub/guspnp12.tar.gz Message-ID: <199707240421.AAA07516@whizzo.TransSys.COM> In-Reply-To: Your message of "Wed, 23 Jul 1997 19:40:57 PDT." <199707240240.TAA08628@rah.star-gate.com> References: <199707240240.TAA08628@rah.star-gate.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Well, that's weird that your mixer works. I'm going to look inside of mixer, and see what it's getting back from the kernel. Does this /dev/sndstat look OK? : bash-2.00$ cat /dev/sndstat VoxWare Sound Driver:3.5-alpha11-9707223 (Wed Jul 23 3:00:00 PDT 1997 Amancio Hasty@rah.star-gate.com) Config options: Installed drivers: Type 1: OPL-2/OPL-3 FM Type 2: SoundBlaster Type 6: SoundBlaster16 Type 7: SB16 MIDI Card config: SoundBlaster at 0x280 irq 10 drq 1 SoundBlaster16 at 0x280 irq 10 drq 5 OPL-2/OPL-3 FM at 0x388 irq 1 SB16 MIDI at 0x330 irq 10 Audio devices: 0: SoundBlaster 16 4.13 Synth devices: 0: Yamaha OPL-3 Midi devices: 0: SoundBlaster 16 Midi Timers: 0: System clock Mixers: 0: SoundBlaster bash-2.00$ I'm now getting these messages at boot time: sb0 at 0x280 irq 10 drq 1 on isa <SoundBlaster 16 4.13> at 0x280 irq 10 dma 1 sbxvi0 at 0x280 irq 10 drq 5 on isa <SoundBlaster 16 4.13> at 0x280 irq 10 dma 5 device combination doesn't support shared irq10 intr_connect(irq10) failed, result=-1 opl0 at 0x388 irq 31 on isa <Yamaha OPL3 FM> at 0x388 create_intr: requested irq31 too high, limit is 15 sbmidi0 at 0x330 irq 10 on isa <SoundBlaster MPU-401> at 0x330 irq 10 device combination doesn't support shared irq10 intr_connect(irq10) failed, result=-1
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199707240421.AAA07516>