Date: Thu, 12 Nov 1998 01:09:17 -0600 (CST) From: Bruce Albrecht <bruce@zuhause.mn.org> To: freebsd-questions@FreeBSD.ORG Subject: problems with ppp -alias in -current Message-ID: <13898.35229.589551.309663@zuhause.zuhause.mn.org>
next in thread | raw e-mail | index | archive | help
I recently upgraded to -current (from a 12/97 vintage of -current) and I can no longer access the internet from my second computer (running NT) with ppp -alias. The NT box can ping/ftp/telnet to my freebsd box just fine. The wierd thing is that if I run tcpdump on both rl0 (ethernet) and tun0 (ppp), it appears as though the data is getting sent via the ppp (tun0) connection, and the data from the internet is getting received via tun0 and put out on rl0. I'm not sure what to look at next. I do not have options IPFIREWALL or IPDIVERT in my kernel, but I do have gateway set to YES in rc.conf. Any suggestions? netstat -rn: Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 166.55.32.213 UGSc 8 32 tun0 10.0.2/24 link#1 UC 0 0 rl0 10.0.2.15 127.0.0.1 UGHS 0 0 lo0 10.0.2.17 0:a0:c9:55:90:c1 UHLW 2 367 rl0 849 10.0.2.255 link#1 UHLW 3 172 rl0 127.0.0.1 127.0.0.1 UH 2 748 lo0 127.0.0.254 127.0.0.254 UH 0 0 lo0 166.55.32.213 166.55.209.248 UH 9 0 tun0 ifconfig -a: rl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 inet 10.0.2.15 netmask 0xffffff00 broadcast 255.255.255.255 ether 00:e0:7d:01:14:07 media: autoselect supported media: autoselect 100baseTX <full-duplex> 100baseTX <half-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 10baseT/UTP <half-duplex> lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 tun0: flags=8151<UP,POINTOPOINT,RUNNING,PROMISC,MULTICAST> mtu 1500 inet 166.55.209.248 --> 166.55.32.213 netmask 0xffff0000 tun1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 tun2: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 tun3: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 inet 127.0.0.254 netmask 0xffffffff rc.conf (abbreviated): ### Basic network options: ### hostname="zuhause.mn.org" # Set this! nisdomainname="NO" # Set to NIS domain if using NIS (or NO). firewall_enable="NO" # Set to YES to enable firewall functionality firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) firewall_quiet="NO" # Set to YES to suppress rule display natd_enable="NO" # Enable natd (if firewall_enable == YES). natd_interface="fxp0" # Public interface to use with natd. natd_flags="" # Additional flags for natd. tcp_extensions="NO" # Disallow RFC1323 extensions (or YES). network_interfaces="lo0 rl0" # List of network interfaces (lo0 is loopback). ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. #ifconfig_ed0="inet 10.0.2.15 netmask 0xffffff00 broadcast 0xffffffff" # NE2000 compatible ISA card ifconfig_rl0="inet 10.0.2.15 netmask 0xffffff00 broadcast 0xffffffff" # Realtek 8139 PCI card ### Network routing options: ### defaultrouter="NO" # Set to default gateway (or NO). static_routes="zuhause" # Set to static route list (or leave empty). route_zuhause="10.0.2.15 127.0.0.1" gateway_enable="YES" # Set to YES if this host will be a gateway. router_enable="NO" # Set to YES to enable a routing daemon. router="routed" # Name of routing daemon to use if enabled. router_flags="-q" # Flags for routing daemon. mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). mrouted_flags="" # Flags for multicast routing daemon. ipxgateway_enable="NO" # Set to YES to enable IPX routing. ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. ipxrouted_flags="" # Flags for IPX routing daemon. arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL. forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") accept_sourceroute="NO" # accept source routed packets to us To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?13898.35229.589551.309663>