From owner-freebsd-questions Thu Feb 25 19:16:23 1999 Delivered-To: freebsd-questions@freebsd.org Received: from hyperhost.net (ether.lightrealm.com [207.159.132.5]) by hub.freebsd.org (Postfix) with ESMTP id 8D28214EA8; Thu, 25 Feb 1999 19:16:12 -0800 (PST) (envelope-from patseal@hyperhost.net) Received: from port3.annex8.radix.net (port3.annex8.radix.net [205.252.108.3]) by hyperhost.net (8.8.5/8.8.5) with ESMTP id WAA08720; Thu, 25 Feb 1999 22:15:54 -0500 (EST) Date: Thu, 25 Feb 1999 22:15:48 -0500 (EST) From: Patrick Seal To: mobile@freebsd.org, freebsd-questions@freebsd.org Subject: PCCARD modem trouble (fwd) Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG This is a second post, (with minor revisions) If I receive no reply this time I'll post no more on this problem. Thanks for all your past help! I have a Dell Lattitude CPi with a docking station and a 3COM 3CCM156 modem. If I'm not docked I can use the modem, when I am docked it complains: driver allocation failed for 3COM This is a dmesg diff: --- nodock Sat Feb 20 11:44:30 1999 +++ dock Sat Feb 20 11:41:38 1999 @@ -18,6 +18,9 @@ chip1: rev 0x01 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 chip2: rev 0x01 on pci0.7.3 +xl0: <3Com 3c905 Fast Etherlink XL 10/100BaseTX> rev 0x00 int a irq 10 on pci0.13.0 +xl0: Ethernet address: 00:c0:4f:ef:2c:5d +xl0: autoneg complete, link status good (half-duplex, 10Mbps) Probing for PnP devices: Probing for devices on the ISA bus: sc0 on isa @@ -62,4 +65,3 @@ PC-Card VLSI 82C146 (5 mem & 2 I/O windows) pcic: controller irq 9 Card inserted, slot 2 -sio2: type 16550A The pccard.conf has irq 10 as the default for the modem. I change it to 8 (to avoid conflict with xl0) and it won't work docked or undocked, even thouth the dumpcis seems to say it should work with irq 8. here is pccardc dumpcis: Code 128 not found Code 128 not found code Unknown ignored Code 131 not found Code 131 not found code Unknown ignored Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: 00 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = 512b, 1 units Tuple #2, code = 0x15 (Version 1 info), length = 41 000: 04 01 33 43 4f 4d 00 33 43 43 4d 31 35 36 00 35 010: 36 4b 20 47 6c 6f 62 61 6c 20 4d 6f 64 65 6d 20 020: 50 43 20 43 61 72 64 00 ff Version = 4.1, Manuf = [3COM],card vers = [3CCM156] Addit. info = [56K Global Modem PC Card],[] Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 01 01 39 00 PCMCIA ID = 0x101, OEM ID = 0x39 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 02 01 Serial port/modem - POST initialize Tuple #5, code = 0x1a (Configuration map), length = 5 000: 01 23 00 03 03 Reg len = 2, config register addr = 0x300, last config = 0x23 Registers: XX------ Tuple #6, code = 0x1b (Configuration entry), length = 16 000: e0 41 99 49 55 3e 3d aa 60 f8 03 07 30 ff ff 28 Config index = 0x20(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Continuous supply current: 3.5 x 100mA Power down supply current: 3.5 x 10mA Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3f8 block length = 0x8 IRQ modes: Level IRQs: 4 5 8 9 10 11 12 13 14 15 Max twin cards = 0 Misc attr: (Audio-BVD2) (Power down supported) Tuple #7, code = 0x1b (Configuration entry), length = 7 000: 21 08 aa 60 f8 02 07 Config index = 0x21 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2f8 block length = 0x8 Tuple #8, code = 0x1b (Configuration entry), length = 7 000: 22 08 aa 60 e8 03 07 Config index = 0x22 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3e8 block length = 0x8 Tuple #9, code = 0x1b (Configuration entry), length = 7 000: 23 08 aa 60 e8 02 07 Config index = 0x23 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2e8 block length = 0x8 Tuple #10, code = 0x22 (Functional EXT), length = 4 000: 00 02 0f 7c Serial interface extension: 16550 UART, Parity - Space,Mark,Odd,Even, Tuple #11, code = 0x22 (Functional EXT), length = 9 000: 01 1f 0f 00 06 00 00 06 00 Modem interface capabilities: Tuple #12, code = 0x22 (Functional EXT), length = 12 000: 02 06 00 3f 1c 03 03 0f 07 00 02 b5 Data modem services available: Tuple #13, code = 0x22 (Functional EXT), length = 8 000: 13 06 00 0f 00 02 00 b5 Tuple #14, code = 0x22 (Functional EXT), length = 8 000: 23 06 00 0f 00 02 00 b5 Tuple #15, code = 0x0 (Null tuple), length = 10 000: 02 01 39 00 a1 00 01 00 00 ff Tuple #16, code = 0x0 (Null tuple), length = 14 000: 31 30 38 56 31 39 34 38 34 47 55 44 00 ff Tuple #17, code = 0x14 (No link), length = 0 Tuple #18, code = 0xff (Terminator), length = 0 2 slots found Thanks! ------------------------------------ _____________________________________ Patrick Seal |"Microsoft isn't evil, they just make | really crappy operating systems." Hyperhost - http://www.hyperhost.net| -Linus Torvalds hosting and Design http://www.freebsd.org - http://www.linux.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message