Date: Wed, 13 Apr 2005 23:12:20 +0300 From: Iasen Kostov <tbyte@OTEL.net> To: "M. Parsons" <mrparsons@gmail.com> Cc: freebsd-hackers@freebsd.org Subject: Re: Route/arp help? Message-ID: <425D7D24.6020308@OTEL.net> In-Reply-To: <ac8741ae050413102521d1aac7@mail.gmail.com> References: <ac8741ae050413102521d1aac7@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
M. Parsons wrote: >To access my dsl modem's line stats page, I have to create an arp >entry and a route for it, under linux this was done as: (eth1 >connected directly to dsl modem) > >ifconfig eth1 10.0.0.2 netmask 255.255.255.0 >route add 10.0.0.1 dev eth1 > > route add -net 10.0.0.1/32 -iface de0 -cloning But 'ifconfig de0 10.0.0.2 netmask 255.255.255.0' (or ifconfig de0 10.0.0.2/24) should set a 10.0.0.0/24 route via de0 why would you want to set it again ? >arp -s 10.0.0.1 ffffffffffffffffff (not really fffff, but the MAC >address of the dsl modem, NOT the nic). > >unfortunately, I cant seem to figure out the commands to get this to >work under FreeBSD 5.3 > >Ifconfig is simple enough (replace eth1 with de0 in my case) > >Arp seems the same (except it needs colons) > >But the route command I have no clue. It doesnt seem to follow the >same syntax as linux, and I havent figured out the correct syntax yet. > >Any help? > >Thanks, > >Mark >_______________________________________________ >freebsd-hackers@freebsd.org mailing list >http://lists.freebsd.org/mailman/listinfo/freebsd-hackers >To unsubscribe, send any mail to "freebsd-hackers-unsubscribe@freebsd.org" > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?425D7D24.6020308>