Date: Fri, 23 Jul 2004 01:07:09 -0400 From: "alden.pierre" <alden.pierre@verizon.net> To: "alden.pierre" <alden.pierre@verizon.net> Cc: freebsd-questions@freebsd.org Subject: Re: Kernel Lock up Message-ID: <41009CFD.5000603@verizon.net> In-Reply-To: <40FD1F36.7090907@verizon.net> References: <40FD1F36.7090907@verizon.net>
next in thread | previous in thread | raw e-mail | index | archive | help
alden.pierre wrote: > > When it's time to compile the GENERIC kernel my system locks up, > forcing me to reboot. Here is an output of dmesg. I'm running > FreeBSD 4.10. I also can provide an > attachment of the compiling output. > > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.10-RELEASE #0: Tue May 25 22:47:12 GMT 2004 > root@perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz > CPU: Intel Pentium III (1000.04-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x68a Stepping = 10 > > Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> > > real memory = 603914240 (589760K bytes) > avail memory = 581242880 (567620K bytes) > Preloaded elf kernel "kernel" at 0xc0551000. > Pentium Pro MTRR support enabled > md0: Malloc disk > Using $PIR table, 7 entries at 0xc00fde80 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem > 0xe8000000-0xebffffff at device 0.0 on pci0 > pcib1: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device > 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 10 > isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device > 7.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device > 7.2 on pci0 > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 > uhub1: 4 ports with 4 removable, self powered > ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 > kbd0 at ukbd0 > uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/0 > ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev > 1.10/3.00, addr 4, iclass 3/1 > ums0: 5 buttons and Z dir. > uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 12 at device > 7.3 on pci0 > usb1: <VIA 83C572 USB controller> on uhci1 > usb1: USB revision 1.0 > uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 7.4 > chip0: <VIA 82C686 AC97 Audio> port > 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 11 at device 7.5 on pci0 > rl0: <RealTek 8139 10/100BaseTX> port 0xec00-0xecff mem > 0xee000000-0xee0000ff irq 11 at device 15.0 on pci0 > rl0: Ethernet address: 00:c0:26:62:97:06 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd3fff on isa0 > pmtimer0 on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master UDMA100 > acd0: CD-RW <CREATIVE CD-RW RW1210E> at ata0-slave PIO4 > acd1: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-104S 0123> at > ata1-master PIO4 > Mounting root from ufs:/dev/ad0s1a > WARNING: / was not properly dismounted > uhub1: at uhub0 port 2 (addr 2) disconnected > ukbd0: detached > uhid0: detached > ums0: detached > uhub1: detached > uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 > uhub1: 4 ports with 4 removable, self powered > ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 > kbd0 at ukbd0 > uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/0 > ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev > 1.10/3.00, addr 4, iclass 3/1 > ums0: 5 buttons and Z dir. > > > Thank You > Alden Louis-Pierre > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > nevermind, I manage to fix my problem. Thank You Alden Louis-Pierre
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41009CFD.5000603>