Date: Thu, 13 Feb 2003 11:05:48 +1300 From: "Philip Murray" <me@philth.net.nz> To: "Dirk-Willem van Gulik" <dirkx@webweaving.org> Cc: <freebsd-questions@freebsd.org> Subject: Re: Temperature monitoring with ServerWorks chipset Message-ID: <002601c2d2e2$e6530ec0$c817a8c0@mandalay> References: <20030212225055.T82095-100000@foem.leiden.webweaving.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_0023_01C2D34F.DD090C30
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
From: "Dirk-Willem van Gulik" <dirkx@webweaving.org>
>
>
> On Thu, 13 Feb 2003, Philip Murray wrote:
>
> > Has anyone got this working? I can't seem to get any values from any of
the
> > monitors in the ports collection (consolehm, xmbmon, lmmon, healthd).
>
> Do a verbose boot (-v flag) - does it show these devices connecting to the
> hardware ?
>
I didn't see anything that looked anything like a temperature sensor.
However, I've attached the dmesg for someone who might know what they're
looking for.
------=_NextPart_000_0023_01C2D34F.DD090C30
Content-Type: text/plain;
name="dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.txt"
Copyright (c) 1992-2002 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD 4.7-RELEASE-p4 #3: Thu Feb 13 10:20:27 NZDT 2003=0A=
root@alladin.open2view.com:/raid5/obj/raid5/src/sys/ALLADIN=0A=
Calibrating clock(s) ... TSC clock: 2395576928 Hz, i8254 clock: 1193017 =
Hz=0A=
CLK_USE_I8254_CALIBRATION not specified - using default frequency=0A=
Timecounter "i8254" frequency 1193182 Hz=0A=
CLK_USE_TSC_CALIBRATION not specified - using old calibration method=0A=
CPU: Pentium 4 (2395.92-MHz 686-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0xf24 Stepping =3D 4=0A=
=
Features=3D0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>=0A=
real memory =3D 2147418112 (2097088K bytes)=0A=
Physical memory chunk(s):=0A=
0x00001000 - 0x0009efff, 647168 bytes (158 pages)=0A=
0x003cc000 - 0x7ffe7fff, 2143404032 bytes (523292 pages)=0A=
avail memory =3D 2087960576 (2039024K bytes)=0A=
Programming 16 pins in IOAPIC #0=0A=
IOAPIC #0 intpin 2 -> irq 0=0A=
Programming 16 pins in IOAPIC #1=0A=
Programming 16 pins in IOAPIC #2=0A=
Programming 16 pins in IOAPIC #3=0A=
SMP: CPU0 apic_initialize():=0A=
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff=0A=
FreeBSD/SMP: Multiprocessor motherboard=0A=
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000=0A=
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000=0A=
io0 (APIC): apic id: 8, version: 0x000f0011, at 0xfec00000=0A=
io1 (APIC): apic id: 9, version: 0x000f0011, at 0xfec01000=0A=
io2 (APIC): apic id: 10, version: 0x000f0011, at 0xfec02000=0A=
io3 (APIC): apic id: 11, version: 0x000f0011, at 0xfec03000=0A=
bios32: Found BIOS32 Service Directory header at 0xc00fdb70=0A=
bios32: Entry =3D 0xfdb80 (c00fdb80) Rev =3D 0 Len =3D 1=0A=
pcibios: PCI BIOS entry at 0xdba1=0A=
pnpbios: Found PnP BIOS data at 0xc00f4a80=0A=
pnpbios: Entry =3D f0000:3924 Rev =3D 1.0=0A=
Other BIOS signatures found:=0A=
ACPI: 000ff900=0A=
Preloaded elf kernel "kernel" at 0xc03a2000.=0A=
Pentium Pro MTRR support enabled=0A=
Creating DISK md0=0A=
md0: Malloc disk=0A=
SMP: CPU0 bsp_apic_configure():=0A=
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff=0A=
pci_open(1): mode 1 addr port (0x0cf8) is 0x800078ac=0A=
pci_open(1a): mode1res=3D0x80000000 (0x80000000)=0A=
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D80] is there =
(id=3D00171166)=0A=
Using $PIR table, 11 entries at 0xc00f5080=0A=
pcib-: pcib0 exists, using next available unit number=0A=
pcib-: pcib0 exists, using next available unit number=0A=
pcib-: pcib0 exists, using next available unit number=0A=
pcib-: pcib0 exists, using next available unit number=0A=
npx0: <math processor> on motherboard=0A=
npx0: INT 16 interface=0A=
pcib0: <Host to PCI bridge> on motherboard=0A=
found-> vendor=3D0x1166, dev=3D0x0017, revid=3D0x01=0A=
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
found-> vendor=3D0x1166, dev=3D0x0017, revid=3D0x00=0A=
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
IOAPIC #1 intpin 10 -> irq 2=0A=
Freeing (NOT implemented) redirected PCI irq 5.=0A=
found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x0c=0A=
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D2=0A=
map[10]: type 1, range 32, base fd9fc000, size 12=0A=
map[14]: type 1, range 32, base 0000c000, size 6=0A=
map[18]: type 1, range 32, base fd980000, size 17=0A=
IOAPIC #1 intpin 13 -> irq 5=0A=
Freeing (NOT implemented) redirected PCI irq 11.=0A=
found-> vendor=3D0x1002, dev=3D0x4752, revid=3D0x27=0A=
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D5=0A=
map[10]: type 1, range 32, base fc000000, size 24=0A=
map[14]: type 1, range 32, base 0000c800, size 8=0A=
map[18]: type 1, range 32, base fd9ff000, size 12=0A=
IOAPIC #1 intpin 14 -> irq 9=0A=
found-> vendor=3D0x8086, dev=3D0x1229, revid=3D0x0d=0A=
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D9=0A=
map[10]: type 1, range 32, base fd9fd000, size 12=0A=
map[14]: type 1, range 32, base 0000c400, size 6=0A=
map[18]: type 1, range 32, base fd9a0000, size 17=0A=
found-> vendor=3D0x1166, dev=3D0x0201, revid=3D0x93=0A=
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
found-> vendor=3D0x1166, dev=3D0x0212, revid=3D0x93=0A=
class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
map[10]: type 1, range 32, base 000001f0, size 3=0A=
map[14]: type 1, range 32, base 000003f4, size 2=0A=
map[18]: type 1, range 32, base 00000170, size 3=0A=
map[1c]: type 1, range 32, base 00000374, size 2=0A=
map[20]: type 1, range 32, base 0000ffa0, size 4=0A=
found-> vendor=3D0x1166, dev=3D0x0220, revid=3D0x05=0A=
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D10=0A=
map[10]: type 1, range 32, base fd9fe000, size 12=0A=
found-> vendor=3D0x1166, dev=3D0x0225, revid=3D0x00=0A=
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
found-> vendor=3D0x1166, dev=3D0x0101, revid=3D0x03=0A=
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
found-> vendor=3D0x1166, dev=3D0x0101, revid=3D0x03=0A=
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
pci0: <PCI bus> on pcib0=0A=
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc000-0xc03f mem =
0xfd980000-0xfd99ffff,0xfd9fc000-0xfd9fcfff irq 2 at device 4.0 on pci0=0A=
fxp0: using memory space register mapping=0A=
fxp0: Ethernet address 00:02:b3:c0:6d:6f=0A=
fxp0: PCI IDs: 8086 1229 8086 1040 000c=0A=
fxp0: Dynamic Standby mode is disabled=0A=
inphy0: <i82555 10/100 media interface> on miibus0=0A=
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
bpf: fxp0 attached=0A=
pci0: <ATI Mach64-GR graphics accelerator> (vendor=3D0x1002, =
dev=3D0x4752) at 5.0 irq 5=0A=
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xc400-0xc43f mem =
0xfd9a0000-0xfd9bffff,0xfd9fd000-0xfd9fdfff irq 9 at device 6.0 on pci0=0A=
fxp1: using memory space register mapping=0A=
fxp1: Ethernet address 00:30:48:51:92:8c=0A=
fxp1: PCI IDs: 8086 1229 8086 1050 000d=0A=
fxp1: Dynamic Standby mode is disabled=0A=
inphy1: <i82555 10/100 media interface> on miibus1=0A=
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
bpf: fxp1 attached=0A=
isab0: <PCI to ISA bridge (vendor=3D1166 device=3D0201)> at device 15.0 =
on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <ServerWorks CSB5 ATA100 controller> port =
0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device =
15.1 on pci0=0A=
ata0: iobase=3D0x01f0 altiobase=3D0x03f6 bmaddr=3D0xffa0=0A=
ata0: mask=3D03 ostat0=3D50 ostat2=3D00=0A=
ata0-slave: ATAPI 00 00=0A=
ata0-master: ATAPI 00 00=0A=
ata0: mask=3D03 stat0=3D50 stat1=3D50=0A=
ata0-master: ATA 01 a5=0A=
ata0: devices=3D01=0A=
ata0: at 0x1f0 irq 14 on atapci0=0A=
ata1: iobase=3D0x0170 altiobase=3D0x0376 bmaddr=3D0xffa8=0A=
ata1: mask=3D03 ostat0=3D7f ostat2=3D7f=0A=
ata1-master: ATAPI 7f 7f=0A=
ata1-slave: ATAPI 7f 7f=0A=
ata1: mask=3D03 stat0=3D7f stat1=3D7f=0A=
ata1-master: ATA 7f 7f=0A=
ata1-slave: ATA 7f 7f=0A=
ata1: devices=3D00=0A=
ata1: at 0x170 irq 15 on atapci0=0A=
ohci0: <OHCI (generic) USB controller> mem 0xfd9fe000-0xfd9fefff irq 10 =
at device 15.2 on pci0=0A=
ohci0: (New OHCI DeviceId=3D0x02201166)=0A=
usb0: OHCI version 1.0, legacy support=0A=
usb0: SMM does not respond, resetting=0A=
usb0: <OHCI (generic) USB controller> on ohci0=0A=
usb0: USB revision 1.0=0A=
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 4 ports with 4 removable, self powered=0A=
pcib1: <Host to PCI bridge> on motherboard=0A=
IOAPIC #1 intpin 2 -> irq 11=0A=
Freeing (NOT implemented) redirected PCI irq 10.=0A=
found-> vendor=3D0x13c1, dev=3D0x1001, revid=3D0x01=0A=
class=3D01-04-00, hdrtype=3D0x00, mfdev=3D0=0A=
subordinatebus=3D0 secondarybus=3D0=0A=
intpin=3Da, irq=3D11=0A=
map[10]: type 1, range 32, base 0000d800, size 4=0A=
map[14]: type 1, range 32, base feaffc00, size 4=0A=
map[18]: type 1, range 32, base fe000000, size 23=0A=
pci1: <PCI bus> on pcib1=0A=
twe0: <3ware Storage Controller> port 0xd800-0xd80f mem =
0xfe000000-0xfe7fffff,0xfeaffc00-0xfeaffc0f irq 11 at device 2.0 on pci1=0A=
twe0: AEN: <soft reset>=0A=
twe0: 8 ports, Firmware FE7X 1.05.00.023, BIOS BE7X 1.08.00.036=0A=
twe0: Monitor ME7X 1.01.00.034, PCB Rev3 , Achip V3.20 , Pchip =
V1.30 =0A=
twe0: port 0: ST3120024A 114473MB=0A=
twe0: port 1: ST3120024A 114473MB=0A=
twe0: port 2: ST3120024A 114473MB=0A=
twe0: port 3: ST3120024A 114473MB=0A=
twe0: port 4: ST3120024A 114473MB=0A=
twe0: port 5: ST3120024A 114473MB=0A=
twe0: port 6: ST3120024A 114473MB=0A=
twe0: port 7: ST3120024A 114473MB=0A=
pcib2: <Host to PCI bridge> on motherboard=0A=
pci2: <PCI bus> on pcib2=0A=
pcib3: <Host to PCI bridge> on motherboard=0A=
pci3: <PCI bus> on pcib3=0A=
pcib4: <Host to PCI bridge> on motherboard=0A=
pci4: <PCI bus> on pcib4=0A=
ata-: ata0 exists, using next available unit number=0A=
ata-: ata1 exists, using next available unit number=0A=
Trying Read_Port at 203=0A=
Trying Read_Port at 243=0A=
Trying Read_Port at 283=0A=
Trying Read_Port at 2c3=0A=
Trying Read_Port at 303=0A=
Trying Read_Port at 343=0A=
Trying Read_Port at 383=0A=
Trying Read_Port at 3c3=0A=
isa_probe_children: disabling PnP devices=0A=
isa_probe_children: probing non-PnP devices=0A=
orm0: <Option ROMs> at iomem =
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9800-0xca7ff,0xca800-0xcb7ff on isa0=0A=
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fdc0: FIFO enabled, 8 bytes threshold=0A=
fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A=
ata2 failed to probe at port 0x1f0 irq 14 on isa0=0A=
ata3 failed to probe at port 0x170 irq 15 on isa0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A=
atkbd: the current kbd controller command byte 0065=0A=
atkbd: keyboard ID 0x41ab (2)=0A=
kbd0 at atkbd0=0A=
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000=0A=
psm0: current command byte:0065=0A=
psm0: failed to reset the aux device.=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
fb0: vga0, vga, type:VGA (5), flags:0x7007f=0A=
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000=0A=
fb0: init mode:24, bios mode:3, current mode:24=0A=
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k=0A=
VGA parameters upon power-up=0A=
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 =0A=
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 =0A=
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0A=
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0A=
VGA parameters in BIOS for mode 24=0A=
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 =0A=
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 =0A=
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0A=
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0A=
EGA/VGA parameters to be used for mode 24=0A=
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 =0A=
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 =0A=
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c =0A=
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff =0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)=0A=
sio0: irq maps: 0x43 0x53 0x43 0x43=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 16550A=0A=
sio1: irq maps: 0x43 0x4b 0x43 0x43=0A=
sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio1: type 16550A=0A=
sio2: not probed (disabled)=0A=
sio3: not probed (disabled)=0A=
ppc0: parallel port found at 0x378=0A=
ppc0: using extended I/O port range=0A=
ppc0: ECP SPP SPP=0A=
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A=
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode=0A=
ppc0: FIFO with 16/16/8 bytes threshold=0A=
plip0: <PLIP network interface> on ppbus0=0A=
bpf: lp0 attached=0A=
lpt0: <Printer> on ppbus0=0A=
lpt0: Interrupt-driven port=0A=
ppi0: <Parallel I/O> on ppbus0=0A=
isa_probe_children: probing PnP devices=0A=
SMP: enabled INTs: 1, 2, 3, 4, 6, 7, 9, 10, 11, 14, 15, apic_imen: =
0x00ff3121=0A=
BIOS Geometries:=0A=
0:03fefe3f 0..1022=3D1023 cylinders, 0..254=3D255 heads, 1..63=3D63 =
sectors=0A=
1:03fffe3f 0..1023=3D1024 cylinders, 0..254=3D255 heads, 1..63=3D63 =
sectors=0A=
0 accounted for=0A=
Device configuration finished.=0A=
APIC_IO: Testing 8254 interrupt delivery=0A=
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 =
intpin 2=0A=
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0=0A=
bpf: sl0 attached=0A=
bpf: lo0 attached=0A=
bpf: ppp0 attached=0A=
new masks: bio 6800cc40, tty 6300009a, net 6700029e=0A=
SMP: AP CPU #1 Launched!=0A=
SMP: CPU1 apic_initialize():=0A=
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff=0A=
ad0: success setting UDMA5 on ServerWorks chip=0A=
Creating DISK ad0=0A=
ar: FreeBSD check1 failed=0A=
ad0: <ST380023A/3.33> ATA-6 disk at ata0-master=0A=
ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B=0A=
ad0: 16 secs/int, 1 depth queue, UDMA100=0A=
ad0: piomode=3D4 dmamode=3D2 udmamode=3D5 cblid=3D1=0A=
twed0: <RAID5, Normal> on twe0=0A=
twed0: 686834MB (1406637312 sectors)=0A=
Creating DISK twed0=0A=
twe0: command interrupt=0A=
Mounting root from ufs:/dev/ad0s1a=0A=
ad0s1: type 0xa5, start 63, end =3D 156296384, size 156296322 : OK=0A=
start_init: trying /sbin/init=0A=
twed0s1: type 0xa5, start 63, end =3D 1406635334, size 1406635272 : OK=0A=
twed0s1: type 0xa5, start 63, end =3D 1406635334, size 1406635272 : OK=0A=
Linux ELF exec handler installed=0A=
------=_NextPart_000_0023_01C2D34F.DD090C30--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002601c2d2e2$e6530ec0$c817a8c0>