Date: Thu, 25 Feb 1999 23:25:24 -0500 (EST) From: Patrick Seal <patseal@hyperhost.net> To: Mike Smith <mike@smith.net.au> Cc: mobile@freebsd.org, freebsd-questions@freebsd.org Subject: Re: PCCARD modem trouble (fwd) Message-ID: <Pine.BSF.4.05.9902252306040.15655-100000@foobar.hyperhost.net> In-Reply-To: <199902260347.TAA04166@dingo.cdrom.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thanks, I changed it to 13 (the only other availible irq that the card seems to support according to dumpcis info) and it still gives me the same error. Also, why can't irq 8 be used? And then why is it listed in the output of `pccard dumpcis` The only free irqs I have are 2, 8, 10, 13 (10 is not free when docked however). I tried all of them and they don't seem to work (except for 10 of course). Next I'm take out my soundcard from the kernel and try irq 5. Thanks, ------------------------------------ _____________________________________ Patrick Seal |"Microsoft isn't evil, they just make <patseal@hyperhost.net> | really crappy operating systems." Hyperhost - http://www.hyperhost.net| -Linus Torvalds hosting and Design http://www.freebsd.org - http://www.linux.org On Thu, 25 Feb 1999, Mike Smith wrote: > > This is a second post, (with minor revisions) If I receive no reply > > this time I'll post no more on this problem. > > > > Thanks for all your past help! > > > > > > I have a Dell Lattitude CPi with a docking station and a 3COM > > 3CCM156 modem. > > > > If I'm not docked I can use the modem, when I am docked it complains: > > driver allocation failed for 3COM > > > > This is a dmesg diff: > > > > --- nodock Sat Feb 20 11:44:30 1999 > > +++ dock Sat Feb 20 11:41:38 1999 > > @@ -18,6 +18,9 @@ > > chip1: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0 > > ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 > > chip2: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3 > > +xl0: <3Com 3c905 Fast Etherlink XL 10/100BaseTX> rev 0x00 int a irq 10 on > > pci0.13.0 > > +xl0: Ethernet address: 00:c0:4f:ef:2c:5d > > +xl0: autoneg complete, link status good (half-duplex, 10Mbps) > > Probing for PnP devices: > > Probing for devices on the ISA bus: > > sc0 on isa > > @@ -62,4 +65,3 @@ > > PC-Card VLSI 82C146 (5 mem & 2 I/O windows) > > pcic: controller irq 9 > > Card inserted, slot 2 > > -sio2: type 16550A > > > > > > The pccard.conf has irq 10 as the default for the modem. I change it to 8 > > (to avoid conflict with xl0) and it won't work docked or undocked, even > > thouth the dumpcis seems to say it should work with irq 8. > > IRQ 8 is never available, and cannot be used. > > Find another IRQ; try 11 or possibly 5, or if you don't have a second > IDE channel, maybe 15. > > -- > \\ Sometimes you're ahead, \\ Mike Smith > \\ sometimes you're behind. \\ mike@smith.net.au > \\ The race is long, and in the \\ msmith@freebsd.org > \\ end it's only with yourself. \\ msmith@cdrom.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9902252306040.15655-100000>