From owner-freebsd-questions Thu Apr 12 1: 0: 3 2001 Delivered-To: freebsd-questions@freebsd.org Received: from rodney.cnchost.com (rodney.concentric.net [207.155.252.4]) by hub.freebsd.org (Postfix) with ESMTP id 59CB137B440 for ; Thu, 12 Apr 2001 00:59:38 -0700 (PDT) (envelope-from praxis@techpraxis.com) Received: from [64.221.116.130] ([64.221.116.130]) by rodney.cnchost.com id DAA16525; Thu, 12 Apr 2001 03:59:37 -0400 (EDT) [ConcentricHost SMTP Relay 1.10] User-Agent: Microsoft-Entourage/9.0.1.3108 Date: Thu, 12 Apr 2001 00:59:46 -0700 Subject: Please help: -- sis0 : watchdog timeout? From: Forrest To: FreeBSD Questions Message-ID: Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG A Call for help from the excellence of this list: My FreeBSD box is giving me TROUBLE.... If someone could detect what is wrong, and if it is a bug, please tell me how to submit it to the kernel people... I have two ethernet interfaces, a 3Com 905C-TX that is flawless so far, it uses the "xl" driver, and an onboard LAN port that was autodetected at FreeBSD install and assigned the "sis" driver. Description of problem: seconds after pluggin' my second ethernet interface into my switch, (also occurs plugged into a Netgear 10BT hub), no matter what cat-5 cable I use(I switched out cables furiously), I get this message on the console: Mymachine /kernel: sis0: watchdog timeout Then ping yields: Ping: sendto: Host is down (repeats until Ctrl-C) Description of freebsd system: FreeBSD 4.3-BETA, running kernel compiled from sources. Description of hardware: Processor: Athlon 600 MHz Motherboard: ECS K7ASA w/ AGP slot, two PCI Bus Master UDMA ports, 2 ATAPI ea. RAM: 256 MB PC 100 SDRAM, 3.3V unbuffered DIMMS. ---> Embedded Network interface: Here is the results of /sbin/dmesg: Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 598839452 Hz CPU: AMD Athlon(tm) Processor (598.84-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x621 Stepping = 1 Features=0x183f9ff AMD Features=0xc0400000 real memory = 134217728 (131072K bytes) config> di sn0 config> di lnc0 config> di ie0 config> di fe0 config> di cs0 config> q avail memory = 126726144 (123756K bytes) Preloaded elf kernel "kernel" at 0xc03d5000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03d509c. Pentium Pro MTRR support enabled md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at 5.0 irq 11 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 chip1: at device 7.3 on pci0 ohci0: mem 0xefffe000-0xefffefff irq 9 at device 7.4 on pci0 usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xefffdf80-0xefffdfff irq 5 at device 10.0 on pci0 xl0: Ethernet address: 00:01:02:87:04:af miibus0: on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: (vendor=0x14f1, dev=0x1036) at 11.0 irq 9 ahc0: port 0xdc00-0xdcff mem 0xeffff000-0xefffffff irq 10 at device 12.0 on pci0 ahc0: Host Adapter Bios disabled. Using default SCSI device parameters aic7850: Single Channel A, SCSI Id=7, 3/255 SCBs sis0: port 0xcc00-0xccff mem 0xefffc000-0xefffcfff irq 9 at device 14.0 on pci0 sis0: Ethernet address: 00:d0:09:53:6f:82 miibus1: on sis0 ukphy0: on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: (vendor=0x13f6, dev=0x0111) at 15.0 irq 10 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 IP Filter: v3.4.16 initialized. Default = pass all, Logging = enabled ad0: 29314MB [59560/16/63] at ata0-master UDMA66 acd0: CDROM at ata1-master using PIO3 Waiting 5 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0s2a xl0: promiscuous mode enabled sis0: watchdog timeout sis0: watchdog timeout and the result of ifconfig: xl0: flags=8943 mtu 1500 inet <> netmask 0xffffff00 broadcast 64.221.116.255 inet6 fe80::201:2ff:fe87:4af%xl0 prefixlen 64 scopeid 0x1 ether 00:01:02:87:04:af media: autoselect (10baseT/UTP) status: active supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP 100baseTX sis0: flags=8802 mtu 1500 inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255 inet6 fe80::2d0:9ff:fe53:6f82%sis0 prefixlen 64 scopeid 0x2 ether 00:d0:09:53:6f:82 media: autoselect (100baseTX ) status: active supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP none lp0: flags=8810 mtu 1500 lo0: flags=8049 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 ppp0: flags=8010 mtu 1500 faith0: flags=8000 mtu 1500 gif0: flags=8010 mtu 1280 gif1: flags=8010 mtu 1280 gif2: flags=8010 mtu 1280 gif3: flags=8010 mtu 1280 Any other details that help in troubleshooting can be provided on request. Thank you, Forrest H. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message