Date: Mon, 06 Sep 2004 15:44:03 -0400 From: jason <jason@ec.rr.com> To: freebsd-mobile@freebsd.org Subject: RE:PCCARD unrecogonized by FreeBSD 5.1-RELEASE on IBM Thinkpad 600 Message-ID: <413CBE03.9070509@ec.rr.com>
next in thread | raw e-mail | index | archive | help
I was in need of help when messing with acpi and found in the man page that hw.acpi.pci.link.0.2.0.irq="9" should be placed in /boot/loader.conf, mot device.hints. Let me know if this is worng or you have it fixed. I am not on this list. I found your emails helpful so I wanted to repay the favor, Jason "M. Warner Losh" <imp at bsdimp.com <http://lists.freebsd.org/mailman/listinfo/freebsd-mobile>>; writes: >/ In message: <20040113185231.22FBC2051D at wolfe.bbn.com <http://lists.freebsd.org/mailman/listinfo/freebsd-mobile>>; />/ Greg Troxel <gdt at bbn.com <http://lists.freebsd.org/mailman/listinfo/freebsd-mobile>>; writes: />/ : Probing cbb, I get a problem with "unconfigured IRQ". Turning on />/ : various PCIBIOS options (in NetBSD), I found that the IRQ in the PIR />/ : was set to -1, which means that the BIOS failed to configure the />/ : device properly. I set a PCIBIOS_FIXUP_INTR option (actually many): />/ : />/ : options PCIBIOS # PCI BIOS support />/ : options PCIBIOSVERBOSE # PCI BIOS verbose info />/ : options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses />/ : options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering />/ : options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing />/ : options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11 />/ : options PCIBIOS_INTR_GUESS # see pcibios(4) />/ />/ Many of these are rolled up into FreeBSD's code already. I'm working />/ on not needing addr_fixup. bus_fixup is needed. The intr stuff is />/ being worked on by John Baldwin. The bus_fixup stuff is needed by a />/ few laptops now to get cardbus working... / To chime in with my experience: I recently installed 5.2-RELEASE on an IBM Thinkpad 600X (2645-4EU). I could not get PCI interrupts working correctly using ACPI. I ran out of time to fiddle with it and went back to APM and it is working. (Well, pccard and cardbus cards are working; suspend still wedges the box). I did upgrade to the latest BIOS available from IBM (ITET55WW, 1.11). The cardbus/pccard problems are because ACPI does not route a usable interrupt to cbb0/cbb1. In dmesg I get: pcib0: slot 2 INTA routed to irq 3 via \\_SB_.LNKA ... cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50103000-0x501-3fff irq 3 at device 2.0 on pci0 cbb1 also gets irq 3. In W98SE or FreeBSD 4.9 or 5.2 w/ apm, they get irqs 9 & 11 respectively. I tried setting a hint, eg (in /boot/device.hints): hw.acpi.pci.link.0.2.0.irq=9 but it does not work because the call to dev/acpica/acpi_pci_link.c:acpi_pci_link_set_irq() dies because its call to acpi_pci_get_current_irq() dies because its call to acpi_pci_link_get_irq_resources() fails because NumberOfInterrupts == 0 (in acpi_pci_link_get_irq_resources()). I assume that this is related to Greg's finding the the IRQ in the PIR was set to -1??? (Sorry I am ACPI-ignorant.) That is as far as I got in trying to figure out what is going on. Any suggestions are welcome. I do not include a full dmesg, but am happy to provide such or any other information on request. andrew
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?413CBE03.9070509>