Date: Thu, 21 Jan 2016 13:10:24 +0100 From: Attila Balogh <bat@netadmin.hu> To: freebsd-net@freebsd.org Cc: ppc@freebsd.org Subject: RB1100 network detection Message-ID: <71D01AD4-CC62-4CA0-938B-743ED420D18F@netadmin.hu>
next in thread | raw e-mail | index | archive | help
Hi Guys,
i am trying to get FreeBSD running on Mikrotik RB1100.
the box is pretty much straightforward, has a P2020E/P2010 SOC with 3 GE =
controllers.
two of the controllers has an AR8327 on them, the third one is connected =
to an AR8035 rgmii phy.
there are two PCIe GE controllers (AR8131).
after some poking the box booted 10.3 prerelease via bootp, but failed =
to find the phy and
to enumerate the switches. but the switches are my least concern, first =
get the box running freebsd
properly.
so the boot ended up in a kernel panic:
transfer started ................................................... =
transfer ok, time=3D2.09s
setting up elf image... OK
jumping to kernel code
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-PRERELEASE #0: Tue Jan 19 20:23:09 CET 2016
bat@ppcbuilder:/usr/obj/powerpc.powerpc/usr/src/sys/MPC85XX powerpc
gcc version 4.2.1 20070831 patched [FreeBSD]
WARNING: WITNESS option enabled, expect reduced performance.
cpu0: Freescale e500v2 core revision 5.1, 1066.65 MHz
cpu0: Features 84000000<PPC32,MMU>
cpu0: HID0 80804000<EMCP,DOZE,TBEN>
real memory =3D 2080358400 (1983 MB)
avail memory =3D 2040160256 (1945 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0: dev=3D0 (BSP)
cpu1: dev=3D1
random device not loaded; using insecure entropy
random: <Software, Yarrow> initialized
ofwbus0: <Open Firmware Device Tree> on nexus0
simplebus0: <Flattened device tree simple bus> mem 0xe0000000-0xe00fffff =
on ofwbus0
openpic0: <OpenPIC Interrupt Controller> mem 0x40000-0x7ffff on =
simplebus0
uart0: <16550 or compatible> mem 0x4500-0x45ff irq 42 on simplebus0
uart0: console (115339,n,8,1)
tsec0: <Enhanced Three-Speed Ethernet Controller> mem 0x26000-0x26fff =
irq 31,32,33 on simplebus0
mii_attach: invalid phyloc 33575
tsec0: attaching PHYs failed
tsec0: could not be configured
device_attach: tsec0 attach returned 6
tsec0: <Enhanced Three-Speed Ethernet Controller> mem 0x24000-0x24fff =
irq 29,30,34 on simplebus0
mii_attach: invalid phyloc 33575
tsec0: attaching PHYs failed
tsec0: could not be configured
device_attach: tsec0 attach returned 6
tsec0: <Enhanced Three-Speed Ethernet Controller> mem 0x25000-0x25fff =
irq 35,36,40 on simplebus0
miibus0: <MII bus> on tsec0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: OUI 0x00c82e, model 0x0003, rev. 3
ukphy0: no media present
ifmedia_set: no match for 0x0/0xfffffff
panic: ifmedia_set
cpuid =3D 0
KDB: enter: panic
[ thread pid 0 tid 100000 ]
Stopped at kdb_enter+0x60: addi r0, r0, 0x0
i did some changes to atphy and miidevs to get past the detection (just =
added the model number).
miibus0: <MII bus> on tsec2
atphy0: <Atheros AR8035 10/100/1000 PHY> PHY 1 on miibus0
atphy0: OUI 0x00c82e, model 0x0003, rev. 3
atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, =
1000baseT-FDX, 1000baseT-FDX-master, auto
tsec0: attaching PHYs OK!
tsec0: Ethernet address: d4:ca:6d:33:57:90
tsec0: so far we cool
tsec0: tx int ok
tsec0: rx int ok
tsec0: err int ok
so at least i got rid of panic, properly retrieved mac address, but the =
box does not see link. i=E2=80=99ll try to look into this and asked Pyun =
who wrote the atphy part
for help and advices.
since bootp is wired to this ethernet controller, it does not want to =
seek further. so i disabled it, and added alc to the kernel config. =
although pci is also in
the config, pci bus is not detected and enumerated, so no chance to =
detect the pcie GEs.
i need some kind of network support to able to connect to NFS to have a =
root fs, so either way (pcie ge or rgmii on tsec) is a good fix for me.
i tried to insert ramdisk into the kernel with some minimal tools to =
look around. it gets to mountroot but fails to mount the ufs on md0 with =
error 22.
i am crosscompiling the stuff on 10.2-release on i386, and created the =
disk image using the usual manual way.
if someone is able to give a hint why this latter could fail, i=E2=80=99d =
be very happy!
kind regards,
Attila
block diagram:
=
http://www.cloudrouterswitches.com/images/Ethernet-Routers/RB1100AHx2-Bloc=
k-Diagram.jpg =
<http://www.cloudrouterswitches.com/images/Ethernet-Routers/RB1100AHx2-Blo=
ck-Diagram.jpg>
the kernel config:
# Custom kernel for Freescale MPC85XX development boards like the CDS =
etc.
#
# $FreeBSD: stable/10/sys/powerpc/conf/MPC85XX 266331 2014-05-17 =
17:34:37Z ian $
#
cpu BOOKE
cpu BOOKE_E500
ident MPC85XX
machine powerpc powerpc
makeoptions DEBUG=3D"-Wa,-me500 -g"
makeoptions NO_MODULES=3Dyes
options FPU_EMU
options _KPOSIX_PRIORITY_SCHEDULING
options ALT_BREAK_TO_DEBUGGER
options BREAK_TO_DEBUGGER
options BOOTP
options BOOTP_NFSROOT
options BOOTP_NFSV3
options BOOTP_WIRED_TO=3Dtsec0
options CD9660
options COMPAT_43
options DDB
#options DEADLKRES
options DEVICE_POLLING
#options DIAGNOSTIC
options FDT
makeoptions FDT_DTS_FILE=3Dmpc8572ds.dts
#makeoptions FDT_DTS_FILE=3Dmpc8555cds.dts
options FFS
options GDB
options GEOM_PART_GPT
options INET
#options INET6
#options INVARIANTS
#options INVARIANT_SUPPORT
options KDB
options KTRACE
options MD_ROOT
options MPC85XX
options MSDOSFS
options NFS_ROOT
options NFSCL
options NFSLOCKD
options PROCFS
options PSEUDOFS
options SCHED_ULE
options CAPABILITIES
options CAPABILITY_MODE
options SMP
options SYSVMSG
options SYSVSEM
options SYSVSHM
#options WITNESS
#options WITNESS_SKIPSPIN
device ata
device bpf
device cfi
device crypto
device cryptodev
device da
device ds1553
#device em
device alc
device ether
#device fxp
device iic
device iicbus
#device isa
device loop
device md
device miibus
device pass
device pci
#device quicc
device random
#device rl
device scbus
device scc
#device sec
device tsec
device tun
device uart
options USB_DEBUG # enable debug msgs
#device uhci
#device umass
#device usb
#device vlan
device nand
device gpio
#options ROOTDEVNAME=3D\"ufs:md0\"
#options MD_ROOT_SIZE=3D8192
#makeoptions MFS_IMAGE=3D/test/root.img
device mmc
device mmcsd
device sdhci
device etherswitch
device miiproxy
device arswitch=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?71D01AD4-CC62-4CA0-938B-743ED420D18F>